New CEILING FAN CAPACITOR CBB61 4.5uf + 6uf + 5uf 5 WIRE 250V
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You'll need to find a capacitor that matches the one on your old ceiling fan.
I looked for a 2 that was a perfect fit but couldn't find one. 5uf 5uf 6uf, which I believe you're referring to as the one on my Hunter fan. In its place, I used this capacitor, which has a value of 4. For the second, 5uf is used. The rest of the capacitors were identical to the original. Another issue is that, due to the larger 4, this capacitor is larger than the original. Rather than 2, use 5uf. The original capacitor was only 5uf and barely fit in the space. When you take out the old capacitor, you'll notice that it's held in place with double-sided foam tape. To mount this capacitor, I removed the old foam tape and replaced it with new foam tape, making sure to leave enough space to reinstall the lamp fixture. My fan would only run at low speed on any speed setting and hum loudly at any speed above low, indicating that the capacitor had failed. I put the old capacitor to the test and it failed two times. The other capacitors were fine, with the exception of the 5uf. I decided to take a chance on the 4. In place of the 2, a 5uf would suffice. The fan now works at all three speeds, thanks to the addition of 5uf. I hope this has been of assistance.
There are two images, each of which is unique. The first is number four. 300V 5uf 6uf 5uf The second is a 4,5uf 350v 6uf 6uf 6uf capacitor. I'm hoping it's the second one, because that's the one I saw and was interested in. If it's the different one, I'm hoping both will work.
Mine is rated at 300 volts and works perfectly.
Selected User Reviews For New CEILING FAN CAPACITOR CBB61 4.5uf + 6uf + 5uf 5 WIRE 250V
552 words, plus a few pointers on how to do things yourself. This was a perfect match for my Hampton Bay ceiling fan, model AC-XXXXXXXXXXXXXXXXXXXXX 552 Four key points that will make other DIYers' lives easier. br>br>1) This was hidden inside the "light kit" at the bottom of my fan model. You probably won't have to pull the entire fan from the ceiling and half-disassemble the motor like I did. )br>br>2) Take note of the squishy, double-layered texture. On the old capacitor, I used double-sided tape. The new capacitor is on the left in my photo, and the old one is on the right. You'll want to do something like this to the new capacitor. It aids the new capacitor's adhesion to the housing and prevents it from rattling around.
.
This was ordered to replace the C61 in the Hunter Breeze fan that was originally installed. It wasn't bulging or anything, but because of the slow startup, I decided to replace it. It now works like a charm after I replaced it. It spins at a breakneck pace. I'm glad I bought it, and I'd buy it again! It's exactly like the movie. It was simple to replace by clipping the wires near the cap and using small gray wire nuts I had on hand. If you don't have any grey wire nuts on hand, you'll need them because the ones in the fan are permanent. Clip the wires close to the old cap, strip the wires, and wire them up, and you're ready to go!.
We recently purchased a new home, and the builders had installed a new ceiling fan in a box in the attic. I wondered if it was still good a few years later, but when I tried it, it didn't work. The switch or the capacitor were the first things that came to mind. This one matched the specifications, so I installed it along with a new switch, and the fan started working like new right away. Of course, you must have a basic understanding of wiring and how to connect household electrical components in order to be safe. Disconnect the circuit breaker, etc. If you've ever installed a ceiling fan, you should be able to do this.
The capacitor was not a perfect fit for my Hunter fan, and the wiring was different from what I had before. I didn't have a choice but to look through all of Amazon's available items. Because the capacitor unit was larger than my original, I had to position it so that I could replace the light unit. If you're a handyman, get some double stick tape to mount the capacitor and a scraper to remove the old tape if you're replacing it. Also, after you've cut out the old wires, get some small wire nuts to splice the wires together. I discovered that the wire gauge was 22/24, which is quite small for electrical wiring, and that the gray wire nuts I had barely worked, which is the smallest size available. I was almost going to solder and use heat shrink tubing, but working on a ceiling fan would have been extremely difficult. I put the old capacitor to the test and discovered that the lowest value capacitor had failed. Three was the value of the new capacitor. Instead of the original 2, a 5uf capacitor was used instead. 5uf, it wasn't a perfect fit, but now my fan, which previously had only one speed and made humming noises, is attempting to operate at higher speeds.
I did not receive a brand new item as described in the advertisement. The capacitor's body was scratched, as if it had been rubbed on a rough surface, and the copper on two of the wires, a grey and a red, was twisted up as if it had already been attached to and removed from some wire nuts. br>br>This was required to replace the faulty 4. My ceiling fan has a 5 micro farad cap. I put this new cap to the test and it came back with a score of 4. 27 micro farads, exactly where it should be. 5 tolerance is a percentage of a percentage of a percentage of a percentage of I'm not happy with everything, but I did test it and it appears to work properly after connecting it to my fan. br>br>Because I don't think returning this part is worth it, especially given the current state of the Corona Virus, I'll use it and take my chances. However, with the witness marks pointing to used, there's no reason this should have been sold as new. People can easily damage electronics and electronic components and then return them, putting the next consumer at risk if they are passed off as new. br>br>While I'd like to give this seller the benefit of the doubt, be aware that he is at the very least deceptive in his marketing and may not be concerned about your safety or best interests. I gave it a two-star rating because it makes me uncomfortable to be sold a used product.
Because my Hampton Bay fan was only working at a low speed, I decided to purchase this one, despite the fact that the wire colors were different. I swapped by matching the colors on the capacitor's printed schematic. There are videos on YouTube that show how to do the job, but you may need specialized equipment. I solder- All wire ends were tipped to strengthen them and allow them to be inserted into the switch. I also spliced two wires together: The red wire is connected to a splice cap, while the grey wire is connected to the direction switch. A solder splice and a butane torch are my tools for splicing. If you don't have a torch or a soldering iron, you can still use splice caps and ingenuity. WARNING: Despite the fact that I had removed the light assembly 24 hours prior to beginning the work, the caps were still charged, which shocked the hell out of me. So be careful when cutting and removing cap wires; they could cause you to shock!.