Original SEIKO Capacitor 3023.5MY
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you take off the back of the watch, you will learn about the problem. In my mind, I thought the one I had was correct. I discovered that the back was the wrong one when I removed it. The capacitor had the number off of it, so I had to order another. The Seiko watch on this page is for sale. However, to determine which one is the right one, you must remove the back first. There is this capacitor I have that I cannot use. Once you have taken off the back of the watch and compared it with the one you own, it should be fine.
Charge is provided to the capacitor by a "generator" in the watch. Capacitors store charge and are responsible for powering watches. The Seiko kinetic was designed with that concept in mind. The movement produced by the watch while owned generates electricity which charges a special capacitor (instead of a battery) to provide power to the watch.
There is 5M62 in my possession.
The capacitor 3023 is a replacement for the seiko The 5MZ band. I am looking at the There is no longer a need for 44Z, as the SK3023 has been discontinued. 24-hour time zone
Selected User Reviews For Original SEIKO Capacitor 3023.5MY
For years, my Seiko kinetic watch had not run, so I decided to see if I could restore the watch, since I have been replacing watch batteries for my family for quite awhile. As a result of my search on the Internet, I was able to learn how to make the repair and how to determine the model of my watch, allowing me to find the battery/capacitor I needed to complete my mission. Now I wear my old "reliable" watch on my wrist every day, keeping perfect time thanks to the Amazon seller/source because he provided me the exact item which fit perfectly.
A good charging time was evident, as was the energy that was bordering on two-thirds of the capacity (normal The following tips may be helpful to You can view videos and find pictures detailing the alignment of the battery, insulator, and washer in your movement. Look closely at the way the left battery anode slides UNDER the copper contacts on Make sure you do not pin the cathode contact beneath Make sure not to short the battery with metal tweezers (if that happens, don't let it go longer than a few With the screw driver, I had to use a little downward pressure to start. Once the torque was broken, I loosened it up a bit. To align the battery, insulator, and washer, a 15x jeweler's loop of your choice is necessary. The magnetized jeweler's screwdriver worked fine otherwise. If reading glasses are not an option, get a magnetized screwdriver. It is possible to sharpen cheap eyeglass screw drivers with nail files and magnetize them by rubbing them over a refrigerator magnet several If you are using a white cotton sheet, or a large white paper towel, make sure to cover your work with several squares When a screw half a mm long jumps out from under your screw driver, the paper towel/cotton cloth prevents the screw from skidding off the hard surface of a table and vanishing forever. regardless of what case you have, an extremely bright flashlight held at a 45 degree angle to your line of vision and parallel to the surface you think it landed on is all but guaranteed to encourage a list screw to jump back into the watch and screw itself back in. I have never been able to fail by doing this because even the smallest objects can cast the most significant shadows. Obtain a cheap waterproof case back wrench so you can remove waterproof case backs I bought two of these sliders for less than ten dollars, and they worked well. A pair of scissors should not be used. You may still be able to use the watch if you align the battery, insulator, or washer wrong, but the watch may not work for a month, or it may not charge, or it may short out intermittently. Use Vaseline or silicon grease to grease the mating surface of the rubber gasket on the case back side. If you wish to do both, choose one side to do! It is my personal opinion that rubber O-rings should NOT be greased I have been there, and here's what I have learned The surface must be dry for the clean and dry object to be placed on As the case back is screwed down right, there is a ring to stick to. Your watch is waterproof when it is equipped with this ring.
No matter what the watch model, this battery is the perfect fit for one. In the installation process, the battery indicated that it was 2/3 charged. Only 1 minute of charging (whirling watch) has given battery a full charge. Upon starting to use the ship - mailed battery, I am pleased to report that it readily accepts and retains charge after one month. Two previous batteries were likely old stock from other sources. The capacity of both batteries began to decrease as soon as they were installed, and neither was able to hold a.
In the past three weeks I have had to replace the rechargeable battery in my watch three After about a week, the battery would show full charge each time. I still had a 60% charge after 2 weeks, even though the battery had been dead for two weeks. It was continually emphasized that it needed calibration by the seller. When I removed the watch from my wrist for two days before I had to recharge it, it stopped working (though the battery is supposed to last a few weeks) after a few months of wearing it 24x7. Four days have passed since I contacted the seller, but no response has been received. If you need a battery, go somewhere else.
It wasn't easy to install due to the small screws and the fact that I didn't want to damage the inside of the watch. However, that is not a defect of the product. I reassembled the watch and was able to run it as soon as the capacitor was installed. To see how long it will take for the watch to be fully charged, I have placed it in my new watch winder. However, I do not expect to encounter any problems with the product.
According to the Seiko watch auto-indicator, I did not get a battery that was particularly fresh. It's a fiddly assignment to replace the battery and you can only test the watch after the assembly. As long as it shows 3/4, I can live with it, because I don't want to send it back and have to do it all over.
The death date of 62) was approximately 6. I was 7 years old then. For Seiko, the cost of updating the rechargeable Li-Ion batteries would be $2,063. I put off the repair of the lithium battery because it was absurd. The topic intrigued me, so after researching and watching YouTube videos, I decided to give it a shot. My experience in watch repairs dates back a few years, and I've been changing batteries, bands, etc. for a few years now. This replacement of the battery (not the capacitor) went much more smoothly than I had expected, and now my watch is working perfectly. During fifteen minutes of charging rotations, the run time was determined to be four The battery charge increased to 4 after a few more minutes The duration of the program is six I'm satisfied with the way things are going so far.
This repair has been done on all three of my Kinetic-powered Seikos and they all now work like new!.
Related Products For Original SEIKO Capacitor 3023.5MY
