White B-Connector Wire Splices for Low Voltage (100 Pack)
Score By Feature
OveReview Final Score
Questions & Answers
There is less space between them than the width of a standard pencil and they are 3/4" long. However, you can certainly cut off a bit of the top after they are crimped inside. The wire is probably crimped in the body by about half an inch. You can solder the wires in heat shrink tubing or simply twist them in the tubing to save space. No-doubt splicing could not be easier with these, however they take up a little more space than small Western Union splices
Yes, without a doubt. The cable is 14 gauge, so I use it on speaker cables. There is a smaller low voltage cable that is 22 gauge that can be used for these but 14 is a bit tight.
Connectors such as these are designed to handle small gauge wire. The 22nd century It has a gauge of 28. If I were designing low voltage lighting, I would be concerned about the size of the conductor. In addition, the jackets do not provide any protection against the elements. A connector that has been rated for outdoor use would be ideal.
Selected User Reviews For White B-Connector Wire Splices for Low Voltage (100 Pack)
One end of the splice is locked and therefore cannot be inserted from both sides. In contrast, the device used here is heat shrunk closed on one side and the connecting wires are inserted from the same side, facilitating installation from either side of the splice. It accomplishes the purpose without any difficulty, although it has some implications for wiring and security. There is already a bit of compression in the connector, so the opening for the wire is oval rather Using my pliers, I squeezed the sides to make them round so that my wires could pass through. There is also a limit to the size of wiring, which is 2 18 gauge and 304 22 gauge wire. As these lights are marked for low voltage wires, this is more than adequate, but it is still important information to know so you don't get caught off guard. Among the nice features of the plug is that there are several teeth which hold onto the wires as they are inserted inside the plug. The crimping of wires ensures that they are unable to be removed easily in the future.
Pack of 100 arrived on time. In the end, I used it for 22g wire, which was super easy since I didn't have to strip the wire! I was unable to do it at first I was wrong, but I was wrong. My crimps weren't as hard as they should have been. After I got vice grips, I actually went back to get the regular kind- I clamped on each connector with the vice closed at just the right distance from the connector when closed. As soon as I tried it, I really like these and they save me a lot of time.
The connector is very easy to use
The price is good
I used a dab of silicone to seal the ends and make the water flow right
It's an easier and more convenient option than the larger mechanical crimp type connectors.
For the price, I usually get them for less, but needed them in a hurry so bought them on Amazon for almost twice the price provided by the manufacturer.
In order for my connections to be waterproof, I placed a tiny bit of silicone before crimping. I found it to work.
Think about it Simply slide two wire ends into the clip, crimp with pliers and you're done. In one minute, you'll have a solid low voltage connection.
I was pleasantly surprised with the price, as I couldn't buy these locally and I was happy with the quality as well. Ensure the wire for splicing has been tightly twisted and is properly sized for splicing. Make sure the wire end is fully stuffed into the splice before crimping on the tough for wires to ensure that it is properly secured.
I have made mistakes and tried to get the wires out and I had to destroy it so I could get the wires out, it came out in two pieces. I have tried a lot of other kinds, so I do not know what they would do to make this one better. I've used these and they work great!.
Related Products For White B-Connector Wire Splices for Low Voltage (100 Pack)
