Alex Tech 50ft – 1/2 inch Split Wire Loom Tubing Wire Conduit – Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As the seller, I am here. Using this split wire loom tubing, the wires can be organized and managed more efficiently. Pets can chew through the cords if they are not protected.
To measure the whole diameter of cat 6 Ethernet cables, you must measure all five of them. You should purchase a split wire loom with a diameter of 7/8'' if all the cat 6 Ethernet cables are 7/8'' in diameter. In this scenario, you should choose a single 1'' cable if the whole diameter of 5 cat 6 Ethernet cables is
If you order 5/8" looms, pay attention to the size. There are most likely going to be small gaps in the wire mesh because most sellers measure by the tubing OD (which means it is actually 1/2" ID wire loom) and it is going to be snug.
In the measurement of 0, the outside diameter is There are zero wires in a 5" split wire loom. A diameter of 6.7" and a radius of 0" are the dimensions. The wire loom is 75" long and 0.25 inches thick. It is "925". By measuring the outside diameter of the clip, you can select the appropriate one.
Selected User Reviews For Alex Tech 50ft – 1/2 inch Split Wire Loom Tubing Wire Conduit – Black
Essentially, the wire loom is the same, but you get 100 feet of it for a fraction of the price you would pay for only 15 or 20 feet at an auto parts store or a big box home improvement store. It is simply too good to be true! In the picture you can see 1/4" of loom on eight gauge wire. *B. The button below is for you to click on if you have found this review helpful.
Hard plastic is extremely effective when there is a rabbit who is determined to make it to the food.
In order to redress the wiring harness of a midsize truck, I am using split wire tubing An old 90's vehicle where the original tubing is cracked and disintegrating near the top of the engine where the ignition components are located. I heated a small sample of the 3/8" tubing to a surface temperature of approximately 220 degrees Fahrenheit After these two exposures, the tubing collapsed completely (see first image).
I then cut another small sample and lowered the surface temperature of the tube to about 200 degrees fahrenheit As can be seen in the second image, the sample shows signs of deformation and melting but for a much less severe degree (see first According to this test, I would expect this material to withstand a certain level of thermal exposure, but will start to deform at around 210 degrees The tubing I plan to use for the project may come into contact with very hot components in the engine compartment, so I will verify that it is not too hot. There is no language available for this product.
My free roaming rabbit chewed through some of the wires when I got this, but it's not thick enough or hard enough to stop him. The wire from the lamp he got was chewed through with no effort. I will not even try to fight him with it. Because of all the good reviews from other bunny owners, I purchased it. In the end, I used double sided cat scratch tape to attach the wire to my brick wall and baseboard, and he's never touched it.
It is a lucky day for me to have adopted a cat who loves to chew through electrical wires. My daughter has been chewing almost nonexistent for the past year after having this tubing installed everywhere. There are occasional instances when I see her chew tubing, but she usually loses interest shortly after, I think because the texture is unpleasant. The wires have not broken through the tubing and she has not been able to chew through it. For my cat, it has been a good choice. I'm not sure if there is anything better on the market, but it seems to be working well. Wires are extremely easy to slip over the half inch size due to its ease of cutting. When I used the thinner size tubing from a different brand, it was challenging to get it over wires easily as well.
I also have a couple of The cord protector I ordered will defend my electrical cords from the chewing of two ferocious kittens. I had no problem using it and was able to cut cloth to the length I wanted. A 1/2" cable was more than big enough for standard electrical cords, and even a few thicker ones like those used for computers. Approximately 50 ft. of pipe was installed. My length was long enough to cover several of my items (lamps, fans, etc. ), and I will order a few more to complete It's probably best for phone cords and smaller items to use the 1/4". I highly recommend it as it will give you peace of mind and is very reasonably priced.
One of the most important factors for me when ordering split wire loom tubing is 1) whether it is made of good material. the tubing is thick enough for the wire loom. A uniform thickness can be determined by 3) if the thickness is constant. Four ) if the split tube can be closed perfectly As a matter of fact, the split loom tubing was of excellent quality. As a result, my wiring looks professionally installed and I have a much better way to organize and protect my wires. This is excellent.
Wire tubing is what I use to protect my AR Blue 383 pressure washer hose from kinking and to prevent it from getting tangled. I had to spend quite a bit of frustration each time I used the pressure washer due to the hose kinking in two spots. By using this wire tubing, you can prevent the hose from kinking as well as protect it from nicks and cuts. It fit perfectly around the PW hose since it has a diameter of 1/2inch. Due to the 20ft length of the pw hose, I did need to cut off about 5 feet to get it done and I used plastic cable ties at the end to secure it around the hose. In the past two years since I wrapped this tubing around my pressure washer hose, I have pressure washed my deck, the front of the house, and both front and rear cement walkways and not once has the hose kinked! Despite all of the dragging around of the hose while in use, the tubing has not yet shown any signs of wear.
Related Products For Alex Tech 50ft – 1/2 inch Split Wire Loom Tubing Wire Conduit – Black
