UES FFR24 Professional DSLR SLR Digital Camera CMOS and CCD Sensor Cleaning Swab Kits for Full-Frame Sensors: 14 X 24mm Full Frame Sensor Cleaning Swabs + 15ml Sensor Cleaner
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Yes, this is the correct sensor cleaning swab for full-spectrum sensors. Nikon Z6/Z7, Canon EOS R, and Sony A7 are examples of full-frame mirrorless cameras.
It is compatible with all 24X36 mm full-frame sensors. I'm not familiar with the Sony, but it looks like it's that size; in fact, I looked it up and it is.
My Sony was similar to your Z7 in price. I've been using these types of kits since I got my previous Sony A7 model, when I discovered that cleaning my sensor at a camera store cost nearly $60. I used to use the VSGO brand, but when I went to Amazon to look for the full-size version, I couldn't find it. I recently purchased this EUS, FFR 24 brand, because it has a sensor version. It's the first time I've used it, and I've had no problems with it. br>br>My sensor was not scratched. The problem isn't with the kit; it's with the person who uses it. br>br>When cleaning my sensor, I try my hardest to use as little pressure as possible. In fact, I simply place the brush on the sensor's edge and 'drag' it to the opposite side. Only the brush's weight is left on the sensor. The brush is then flipped over and dragged in the opposite direction. br>br>After that, I remove it and never drag it a third or fourth time. br>br>The brush can be used without the liquid cleaner, according to the VSGO kit. However, I always clean my sensor with the liquid. Only when I can find a spot in my photos that isn't related to the camera do I clean the sensor. Finally, while you may not always be able to control it, I prefer to change my lenses at home or in my car rather than in a public place.
Yes, to put it succinctly. However, if you were unaware of this, it's likely that you've never done it before and would be better off having it professionally cleaned to avoid damaging your sensor and ruining your camera.
Selected User Reviews For UES FFR24 Professional DSLR SLR Digital Camera CMOS and CCD Sensor Cleaning Swab Kits for Full-Frame Sensors: 14 X 24mm Full Frame Sensor Cleaning Swabs + 15ml Sensor Cleaner
Switching from DSLRs to mirrorless cameras. If you have multiple lenses, the first lesson you'll learn is that dust on the sensor is a constant issue. I don't live in a particularly polluted area. The exact opposite is true. There has been a lot of rain. Even with atomic rubber air blasters and a built-in vibration cleaner on the screen. In the last six months, I've used a cleaner on my Sony A7 and 6500 more than I have in years with Nikon DSLRs. The price is fair. As a result, the value is good because you will most likely use them frequently (one time only!). I don't think they'll do anything to my sensor. Full-frame and APS-C cameras are both available. There were no issues at all.
After reading some reviews, I was initially hesitant to use the included solution. My sensor's dust specs, on the other hand, are adamant. Because of one particularly difficult spot, I ended up using half of the swaps. which turned out to be a bit of a blunder. After the third try, I should've given up. Despite my concerns that repeating the entire process would be too much, I went ahead and did it. Except for that one spot, which can be easily healed in Photoshop, my sensor is now very clean. br>br>The paddle fit the full frame sensor of my Canon EOS 5D MK II very well, though there is some space on top and bottom of the sensor that the paddle cannot reach, as some reviewers mentioned. That was also where some of my dusts were, which was annoying. br>br>Resist the urge to swing the paddle back and forth (which I did, unfortunately). So, if you're having the same sticky dust issue as me, here's what you should do. STOP after your third or fourth attempt, if there is still one dust spot. That's preferable to continuing and potentially exposing my dust specs. br>br>Because we're all afraid of damaging the sensor, swapping takes some getting used to. But I went all out because those blobs of black specs had been ruining far too many of my otherwise wonderful photographs - in particular, my ideal sky So it's either that or risking everything. br>br>I'm relieved to report that my gamble paid off, and my sensor is now CLEAN! Hooray. Thank you to everyone at UES for making this possible. br>br>So, despite a few hiccups, I give it 5 stars - because it is less expensive than having it professionally cleaned for $60. br>br>I hope this information is useful.
I did something that everyone knows you should never do - I did something that no one should ever do - I did something that My lens was blown out by the wind. It was stupid, but it was a reflex, and before I knew it, I'd smeared saliva on my sensor. Gross. br>br>I bought this cleaning kit for my Lumix S5, and the swabs were just right for a full-frame camera. sensor of the frame I did as instructed and swiped in each direction once. This first swab got me most of the way there and after a second swab it was as new again.
After blowing off the sensors in my 5Ds and 5Dsr, I put the camera into manual sensor cleaning mode, turned the body upside down, and gently stroked the cleaning wand over the sensor. It had the desired effect. There is no visible dust on the sensor any longer. Note: I didn't use the fluid because I heard it could leave a residue. I used the "rocket" air pump to blow off the wand in between cameras. Manufacturers would prefer that you only use it once, but I believe this injunction contains more than a hint of planned obsolescence.
All of my hopes and dreams are fulfilled with these swabs and the cleaning solution! br>br>I know it sounds silly, but I'm very picky about sensor spots, especially in real estate photos where my aperture is limited. I use these swabs on a regular basis, and they always clean well without causing damage to the sensor. br>br>Just remember to get the cleaning solution as well. I only needed a swab refill this time, so I didn't order the entire kit.
I made full use of the UES. To clean my Nikon D600, I used frame swabs and Eclipse solution. For more than a year, D750 sensors had not been cleaned. The sensors on both had a lot of spots, as you might expect. Some upkeep was required. I chose the Eclipse solution purely out of personal preference. The UES sensor solution that came with the swabs was not one of them. br>br>It took me about four hours. Despite five attempts on each camera, the UES swabs were able to clean the sensors without damaging or scratching them. Looking at test images on 24" monitor I was pleased to discover that 99% of the spots that bothered me were gone. The remaining 1% were extremely minor and difficult to find things. see spots near the frame's edges, which were hardly worth mentioning. br>br>The swab material appears to be microfiber just by looking at it. It's wrapped in a vacuum-sealed bag. I like how it comes in a sealed packet because it keeps it as clean as possible before use. During actual use, I noticed that the swab's width was just a smidgeon too narrow ( As you swiped the swab across the sensor on the D750, there was some "wiggle room. " Depending on how straight your swipe was, this could result in very small portions of the sensor's extreme edges not being covered. This was not an issue for me, but it's something to keep in mind if you're the type who insists on the swab fitting the sensor perfectly.
They were very inexpensive and did a good job. I work as a photographer in the industry. I was a little nervous doing this for my new mirrorless camera because I'd never manually cleaned my sensors before, but I found a couple of videos on YouTube to help me out. It's not difficult at all. Just be smart and use your brain; if you're careful, you shouldn't need to use these very often.
I was afraid to touch the sensor because I had never done so before. Cleaning the sensor at the local camera shop would take a few days (and cost $75). I made the decision to give it a go. I had to use four swabs to get the job done, but I'm pleased with the results.