AIYIMA 1pc 400W Adjustable Multi Speaker Treble/Bass 2 Unit Audio Frequency Divider 2 Way Crossover Filters Updated Version
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The high and low frequency crossover points can be selected in a variety of ways. You can move the jumpers in order to adjust them, but they are marked in Chinese and I couldn't I made it up as I went along.
There is not much need for A look at the circuit board reveals a pair of inputs and (2) pairs of outputs, one for the bass and one for the
Due to the item being a modified version, please do not be concerned about missing the A,B,C, D in the description, i will do that so the buyer is aware. I appreciate your help.
The woofer and tweeter need to be connected to the appropriate output terminals of Depending on the load, the crossover can handle anything from 4 to 16 speakers There are 16 ohms in this circuit,
Selected User Reviews For AIYIMA 1pc 400W Adjustable Multi Speaker Treble/Bass 2 Unit Audio Frequency Divider 2 Way Crossover Filters Updated Version
The specifications are 1) Dimensions 2) Suitable for Speaker Power 5cm (LWH) A suitable speaker impedance is 400W or lower
3) Power capacity 4 jumpers onboard to optimize your audio effects Jumper A, B for bass Jumper C for treble Jumper D to optimize your audio effect. C and D are the jumpers for the Here is some information about the Using Jumper A, B, you can control how the bass of a song sounds. Using A we can determine the lower limit of the bass audio range and using B the upper limit. It has been noted that in some speakers, if the Bass volume is turned up too much, distortion will occur. As soon as that occurs As an example, we remove the jumper cap of jumper A to limit the bass so that distortion is As soon as we remove Jumper B's cap, the bass level increases while when Jumper B's cap is on, the bass level decreases. You can control the treble range of the instrument by jumping C and D. In a jumper C and D combo containing both caps on, the volume of the treble is highest, and when only cap C is on, the volume of the treble If only cap D is on, lower it further. It is not possible to hear treble when both caps of C and D are removed. A description of jumper C and D is as follows To really understand what treble does, we have to hear it in action. As a general rule, it is as follows Bass is better if you add A and D A and C stand for clear highs and lows In a combination of A and CD, you will experience enhanced treble (the overall effect is more favorable to treble) There is more median frequency when AB and CD are added. Bass effect can be reduced by removing cap A when it is excessively raised. The board should be optimized until the sound is the best you can get, then you should fix the.
The board seems to be flimsy, as I read somewhere. In fact, the board is not bad at all. I had no problem with the PCB because it is thick and of good quality, but it was the wire connectors that were a problem. It's a very good concept, but the connectors are too thin and weak that they don't hold fine wires like the subwoofer wires. They can only hold small wire, and even this is turned when using a flat screwdriver to tighten the screws. For the wires to stay connected, I had to tape them down. However, the performance was generally good in spite of the poor connections. If you want to adjust the speaker sound, you can do that too. The only thing that kept me from giving it a 5 star rating was the wired connection.
Micca center channel I have is amazing but did not come with cross over plugs (the company should have included them). I've put it in and adjusted the jumpers, and it has woken up the speaker! Highs and lows are both in good shape. Even though the writing on the board is in Chinese, that makes it challenging, but after trying the tone combinations in the pictures, I was able to find the right color. As part of a 100 watt stereo system, I'm using two woofers and a tweeter. The following sentence should be written for I think you'll be very happy with the sound from model 50. It is here that I will go RIGHT to if I want to build some custom speakers.
I'm confident that the product would meet your full approval once it is connected and set to your specifications. It takes a lot of patience to connect the wires to the unit. There is a need to fix it. It was a hit or miss situation for me because I had an unstable speaker cable. We should think of a better way to stabilize all wire connections so the manufacture will rethink the method for fixing the issue.
In the future, I would like them to post the frequency cuts with each jumper combination. There are no precise instructions or explanations that I found on the web, the sole use of a crossover is to optimize frequency distribution, just because something works well does not mean it's working correctly. I am likely underworking or overworking a speaker washout without As far as sound quality is concerned, it is OK. I will revise my review to a 5 star rating if the manufacturer provides a frequency cutoff chart.
The stock crossover in my 12 inch pa speakers sounded terrible out of the box, so I had these installed to replace it. As a result of both of these experiences, I decided to try to upgrade them rather than return them. A lot of customization is possible on the board. It was easy to tune it to the right sound for my cabinet with a little fiddling.
With the application of 200w, I replaced a dying crossover in a 15in 2way PA cabinet. I find this to be a great value for the price. So far, I have no complaints about it. Even though I was intimidated by the whole jumper settings thing, I learned that it can be done easily just by playing with the jumpers until I got I think the wire connectors are fine, tight and work just fine. People complain about them, but I think they work just fine. 12 bucks is not a lot of money for me Take a closer look at it. Thank you for fixing my speaker, I feel much happier now.
Adding more will be done Instructions are not provided, but the process is fairly straightforward. Adding more will be done Power handling is related to this. Having installed a crossover in the peavey cabinets (old Peavey speakers), I was able to listen to music well. I agree, but. In the other case, it did not work. As far as I could tell, it didn't appear to be damaged physically. There is a possibility that bad soldering or a bad circuit is the issue. Make sure you are careful when buying! I would not recommend returning the item. The parts will be used as spares!.
Related Products For AIYIMA 1pc 400W Adjustable Multi Speaker Treble/Bass 2 Unit Audio Frequency Divider 2 Way Crossover Filters Updated Version
