Maxmoral 5-Pack PL-259 UHF Female to UHF Female Coax Cable Adapter S0-239 UHF Double Female Connector Plug
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You can only connect the Male 259's as well as your SOLDER/CRIMP connection, so always use Liquid Tape or Coax Tape at these types The other alternative is to buy a new coax cable of the appropriate I wish you the best of luck,
The following are some of the tools I have used in my research - I have used 8X coax from antenna to radio and have not noticed any changes in Furthermore, I consulted with other hams on social media in discussion groups and found no difference between using these coax runs and using one coax run.
The Chinese People
In my hand is one of them and I checked with a razor knife that it is
Selected User Reviews For Maxmoral 5-Pack PL-259 UHF Female to UHF Female Coax Cable Adapter S0-239 UHF Double Female Connector Plug
You can also buy cheaper alternatives if you're not in a rush. It's an old school approach for me. It is an adapter that has two male-ended ends and connects UHF female to UHF female (PL-) There is an inlet for the 259 connector for cables to plug into The PL-splice is really a numbered splice and is identified as such The number 258. Having said that, despite that mistake in the listing, these five connectors are of very high quality, having been sourced from China. You get what you see in the photo. Presented in a padded envelope, the small box is delivered. I get free Prime two-day shipping too, so it's not too bad of a deal. In order to get the same number of similar adapters from another source in AZ for 89 cents each, I'd have to pay more in total by choosing Priority Mail shipping. Just used up all of my PL- credits A Silver Plated Amphenol 258 (USA sourced piece) is fixing coax runs at my second residential address in Illinois. How could they possibly have been spliced together? There were two coax runs tied to my chimney that had fallen off due to UV cracking of the tack down holders (plastic and nail types), and met a sad end with a roto-tacker In the summer of 2016, tillers were in use. Another two runs were cut with diagonal cutters by the Comcast Internet installer in the basement and at the house's exit point for the coax. There were rumors out there that some of those guys did not like the diameter of other mystery coax their own RG-7) It wasn't my son who had been manning the fort for a few months who carefully watched the guy. The concept remains a mystery to me. The RG I have There was a gray jacket on 8X. The cable TV channel UV resistance is better with a black 6 than with a white 6. As a result, I used up all of my PL- credits In the repair job, 258 spare parts were used, but more were needed. If I did it again, I would do it exactly the same way. If I had to buy them elsewhere, I would do it at a hamfest for a buck apiece.
Just make sure you use a lot of electrical tap or Coax. Wrap up the splice to make sure it is completely contained. It is not possible to waterproof the 259 and 258. The splice will be impinged by rain if it is The rain impinging on the inside of a coax has bad juju. The coax braid becomes blackened, and the copper has a blackish tinge to it. Consequently, you will have to replace the entire run of coax since it will be very lossy. In other words, a splice tries to avoid that.
This vendor will be added to my favorites to be able to buy from again in the future. Maxmoral, thanks for that.
The presence of these types of connectors is vital to the proper run of 52 Ohm coaxial cable. The Polish language. To SO- 259 Having female connectors on both ends of cables that have a double female connector meets the requirements resulting from cable lengths that have male connectors on both ends. They also provide an easy and convenient way to separate cable lengths for testing, or to redress It is recommended that you carry a minimum of two to six of these very handy nickel plated connectors when you start any project.
Below is the addition I made to the document There are two lines with 50-foot length When I used 75-ohm coax cables, my impedance was increased to 75 ohms as measured by a rig expert antenna analyzer.
It needs to be signed directly. Buying is a bad idea! From their appearance, they seem to be cheaply made. Upon testing them on my bench, I found their impedance to vary widely from one unit to the next. There is a problem with the manufacturing process here. It consists of the insulation surrounding the structure. It is easy for moisture to enter through 239 since there is a gap. It is not a feature that I have seen on other brands I have purchased. Stay away from this vendor! It was annoying that they required a direct signature for a $7 product!.
So far, I've only used it twice once with a 10ft cable and once with an 80ft cable The coax cables are 12ft long. When used on a J-based device There are two HT's on the pole, so no loss is observed.
Can't speak for those using this on coax for transmitting, but for simple reception (HF and VHF/UHF radios for public safety), they do well. As a result, I am able to use the shorter coaxial pieces I already own rather than having to order or produce longer pieces for each new antenna or location I want to try.
Coaxial cable is what I purchased for test and for my radios in case I need to lengthen them. Using my mobile phone as a meter is going to be the best option for me. I appreciate your help. Thank you, Michael.
Related Products For Maxmoral 5-Pack PL-259 UHF Female to UHF Female Coax Cable Adapter S0-239 UHF Double Female Connector Plug
