Accu-Gage Tire Pressure Gauge with Protective Rubber Guard, Angled Chuck, 100psi
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Inquiring about the location of this tire pressure gauge when I placed the order, I was disappointed to discover that it is made in China. I received my tire pressure gauge on 12/21 and was surprised to realize it is made in China. There is no reason for putting "G." in the name of this company. Meiser & Co., Inc. This is Colorado. The University of Illinois at POSEN. This is a lie put on the bottom of their gauge so that consumers will think it was made in the United States when it was Make sure to put "MADE IN CHINA" on the bottom of their gauge if they are proud of their product and where it's made so that everyone knows
As far as this gauge is concerned, you can push the button to see the reading. I just want to mention that the bleeder button functions in both directions. A button on the gauge is pressed when attached to the tire valve for bleed off of The reading is held on the dial face and the button is pressed to adjust the reading to zero when the tire gauge is removed from the tire valve.
There are four Accu gauges in my collection. Neither one reads the same as the other. This did not help. I sent them all for calibration. You can send it to a repair shop or buy a new one if it isn't working. There are many new ones out there these days and they are made of cheap junk inside. I still use the same one from 1975
Accurate Measurement System Grade B), which means that the mechanical accuracy rating is * 2% below 30% of scale and * 3% An accuracy of plus or minus 1 psi is therefore possible for a 60 psi tire gauge An 8 psi pressure rise from 0 to 8 Moreover, the ratio of 15 to 45 is 60/40 It has a pressure of 60 psi and is calibrated to 1 psi. A pressure of 2 psi is indicated at the middle The company's nbsp I just wanted to let you know that unlike pistons I was plugging- This gauge does not suffer from effects of changes in temperature, humidity, altitude or contamination of the air stream, unlike other bourdon tube-type gauges.
Selected User Reviews For Accu-Gage Tire Pressure Gauge with Protective Rubber Guard, Angled Chuck, 100psi
I recommend that you read this! Reading the comments other people have made about these gauges has been very helpful to me. In the past, some were dissatisfied with the gauge's inaccurate readings, as well as its inability to retain pressure once removed from the Even though I ordered one anyway, I was hoping I would get a gauge straight from the manufacturer. Moreover, I was also dismayed with what I received since it did not measure accurately or hold pressure properly as well. WATCH OUT! After looking at the gauge, I noticed and observed that the protective rubber guard they add to cover the gauge had become "Pinched" with the stem assembly as it was inserted into Due to this obstruction, the stem was not able to completely secure to the "O-" It is topped with a "ring" at the base. My only solution was to unscrew the whole stem from the gauge threads in order to re-install it In order to avoid pinching the protective boot when the gauge stem is screwed back on, the boot is positioned so as not to pinch. It's WA only I love how the gauge works! Now you can accurately read the tire pressure after you remove it from the tire stem! The pressure retaining cap retains pressure so you can accurately read the pressure!.
A lifetime warranty and the reputation of the manufacturer prompted me to purchase this tire pressure gauge. The gauge also lacked the ability to hold the reading, the air would just leak out of it as soon as I stood on it. After some time, I noticed that the pressure readings were lower than others I have. . . . I cleaned out the valve several times, but it didn't take long for it to leak again. According to the manufacturer, the solution is as simple as wiping the valve. So I decided I wanted to take advantage of the lifetime warranty, and I emailed The Meiser & Company The Company. A total of $10 for shipping + parts & labor will be charged to me ($5 for shipping & $5 for parts & How can this be a warranty if I have to pay for the repairs? For about the same price they wanted me to pay for the warranty repair, I decided to purchase another tire pressure gauge. There will be no more purchases of this brand for me!.
So far, it looks like it's working well. Thank you. I hope it stays this way. Unfortunately, this is not true for the companion product I ordered at the same time. The Accu-Logic Watches were much worse. When it was used for the first time, the pressure gauge provided inaccurate readings. It was not possible to return the pressure gauge to zero after I pressed the pressure release button. There is an issue with the weight being It is a junk product, so avoid the RA60X model with the hose & right angle chuck. While I commend Amazon for their prompt refund of my money for the RA60X, I will be disappointed for Amazon's service. However, the Accu-Clean system comes at a cost of approximately $1,700 I just received my gauge RS60XA Professional Tire Pressure Gauge with Protective Rubber Guard (60 PSI) and it works great. * * * Update Air pressure readings are no longer available on the unit that I kept. A tire valve stem that has been removed from the tire reads zero pressure when removed. The fact that I'm unable to return this piece of junk has caused me to lower my rating to 1 star
9/6/2020 A new update has been made In response to my change of star and report of the above problem, the seller promptly sent me an email with instructions on how to fix the problem through Amazon. This suggestion was successful and worked to solve the issue. Previously I had rated the product as 4 stars but have changed it to 5 stars now.
After the gauge is disconnected from the tire stem, the tire pressure does not remain in the gauge, but instead immediately and rather quickly leaks out. About 10 seconds after the indicator was reset, it was The video would have helped me better understand this behavior, but I did not take a video of it. It did not seem to work no matter what I tried to remove and replace the various components that simply unscrew from the base and checked the o-rings No damage appeared to have been done to the rings. It is the same result when I check the release valve to ensure it is not partially pressed or damaged. I am left to believe (or rather hope) that mine was a defective unit based on the other reviews for this product. A return check was sent out a short time later.
Due to its ANSI certification, I bought the first one, and it has worked flawlessly for Compared to the old one, the new one appears to read pressure equally well, but it is about two pounds different, or about seven percent, different. Who's the most accurate of the two? In reality, two pounds isn't much, and I might have been obliviously happy with either if I didn't have the comparison, but I would have expected the ANSI certification to mean they're more or less equal. There does seem to be a greater match between the old one and my TPMS.
We build accurate! Holds the reading of the pressure until the release line is reached. It comes in extremely handy to have the bleeding function. It looks like this gauge is made with high quality materials. No air leaks (like other gauges I've encountered) as it sits comfortably on valve stems. For my Honda's TPMS (Tire Pressure Monitoring System), which is designed to maintain the same pressure in all tires, the bleed function is extremely important. Aside from that, if you overdo After you have inflated a tire, all you have to do is press the button to release any excess There's a need for one, and it's urgent.
There is extremely high consistency, which is far more important for accurate pressure than absolute precision, since you want both tires on each side to have the same pressure, yet plus/minus half and even a whole PSI (which is 3% at 30psi) are not crucial for accurate pressure. The valve must be tightly pressed on to prevent air leakage. I have to be very fast doing it. It would have been great if it had had an extended tip, as I am getting old and not very fast. When I had a minor issue, the seller was very prompt in communicating with me, and sent instructions for how to resolve it. All in all, I am very happy with this purchase and will recommend it.
A gauge like this appeals to me. ATV users will find it easy to read, and it's perfect for my vehicle. criticism was that right out of the box, the gauge was loose in its housing, and it did not have a valve attached to it. A simple fix is all that is required. Take off the rubber cover for the nipple / valve assembly. Remove the nipple/valve assembly from the housing. The rubber cover must be replaced after you tighten the two screws on the back. Be careful when securing the valve assembly inside the gauge so that the rubber cover does not get pinched under the mounting bracket. Once that was accomplished, everything was tight and the gauge continued to take measurements after this point.
Related Products For Accu-Gage Tire Pressure Gauge with Protective Rubber Guard, Angled Chuck, 100psi
