MOOG Chassis Products K200640 Track Bar Bushing
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you have a 2009 F- then you should be okay Ford hardly changed the front end of the 350 and I don't think they made any modifications to the f-150.
According to the catalog information, the product is available from On the 2019 Ford F350 4x4, the K200640 is offered as a replacement part. Please accept my sincere thanks
There is an ID of The thickness of the cable is 5mm. A 43-day old is a 43-day-old. The thickness is 15mm. There are 44 words in the length. This is 18 mm in diameter.
Selected User Reviews For MOOG Chassis Products K200640 Track Bar Bushing
Metal sleeve set inside indicates it is not a track bar sleeve but the remnant of an old bushing. It sounds like a loose tool was used to remove the old bushing, which left it badly cracked.
I broke my cast iron vice in half when I used a bench vice. I'm soooo sorry! It's very difficult. I used a bench vise, but I had to constantly hold the vice in place. To get the bushing into the vise, I had to purchase a heavier vise. Before you install the track bar, it's a good idea to freeze the bushing for 30 minutes. You can grease it and start it off straight by using a little oil. My 08 F250 dies after a few seconds of wiggle. Hope it works out for you.
This is the Ford F-150 2008 I am no longer experiencing death wobbles thanks to this bushing. The bushing in my wheel has completely deteriorated, but you couldn't see it until I removed the What I want to tell you is this. There is no easy solution to this problem. There is a really tight torque on the bolt, so the old bushing sleeve has to be cut With a two-axis gear puller I was able to remove the gears. Bolts for the driver's side need to be accessed by removing the driver's side tire and lowering the sway bar. It took me less than an hour to remove one side of the track bar and replace the bushings. You will not have any problem if you have a bushing press. An electric socket and c-clamps were used to hold the plate.
In my opinion, if you do not have mechanical experience, you want to have this done by someone who does. It may be a bother to replace this yourself if you don't know how. In fact, it is cheaper to replace this than to replace the entire track bar, so I'm impressed with the value, hopefully it will last for a long time.
This is exactly what I expected (i. e. The old bushing should be removed using a hydraulic press and the new one should be inserted with ease. It is necessary to completely remove the metal sleeve of the old bushing in order to install this one.
It was a relatively inexpensive replacement, but installing it was a little difficult. There were no problems pressing in a shop press. Although I rolled it at the edge, it should not hurt at all. Without a shop press, this is a difficult installation. Easily replaceable on Amazon for a low price. My website's wandering front end was fixed thanks to your help.
A snug fit is what you should expect.
I definitely recommend this product because of the perfect fit and the affordable price.