MotoFab Lifts DR-2.5-2.5 in Front Leveling Lift Kit Compatible with Dodge Ram 1500 Pickup 4WD

The kit was recommended in a YouTube video. I installed with my buddies (make sure you have all the equipment you need). Overall, it took us about 4 hours to complete (3 hours on the first side and 1 hour on the After putting 34" tires on with no rubbing, it was aligned the next day without any problems. I have seen people with 35" tires on with no rubbing. A lot of changes were made to the truck's appearance. I also got an additional 1" lift by adding new rims and tires to my vehicle.

Ibrahim Hines

| Aug 12, 2020

On my 2012 Ram 4X4 1500, I had a 5" front lift kit installed. Delivery of the kit was on time, and the kit was not damaged. (Part 2). It took roughly two hours for me to complete. To install the kit, you must do it per side. View videos on YouTube Raise the front of my truck by almost 3 inches and it now looks awesome (4)! Before I purchased the vehicle, I measured the distance from the top of the wheel wells to the ground both Wheel wells on the back of the car were 3 inches higher than those on After measuring the spacers in the kit, I found that they measured 1mm thick prior to installation. The number five. Although I thought this was odd, the guys at Motofab are the best! Once again, I'd like to thank you for supplying such an excellent product.

Fisher Calhoun

| Nov 18, 2020

The whole process was a bit trial and error, a buddy of mine and I finished both sides in less than three hours. The time spent talking with the neighbor and enjoying an adult beverage is about 45 minutes. Taking the front assembly apart was difficult in the beginning because we wanted to avoid removing the whole assembly. But once it was done it was all very straightforward. Besides spending 20 minutes looking for a bolt I lost while trying to screw it onto the strut mount, it was also time spent looking for a nut.

Oscar Hunter

| Oct 21, 2020

Installers could install this kit for you, so it may be a perfect fit if you plan on paying a shop for the job. It's not a good situation for a mechanic working at home, however. It can be difficult to understand certain instructions, and they can be inaccurate in some cases. lower shock mount bolt should be installed first when reinstalling shock/strut), but this is There are also instructions claiming to have to change the cap of the strut/shock 180 degrees on some editions of the 1500, but they don't specify which editions of the 1500. It also doesn't give tips like removing the brake caliper so that when pushing down the lower control arm your brake lines are not stretched out. The product is good overall, but the instructions are a complete mess.

Kynlee Conway

| Nov 29, 2020

This is a very simple installation. This does work on the Ram 2WD Our total time was no more than three hours. If we had not stopped to eat and chit chat we could have accomplished this in under two hours. The forward lift was about four inches with the 33s and 20s.

Jaxtyn Carroll

| Jan 20, 2021

In the past four years, I've had them installed on top of factory struts, and I've had my truck towed and plowed during that time. As a result, they did exactly what you'd expect, but in retrospect I wished I just had gone with proper shocks with adjustable height. The passenger shock in my car blew after four years. I replaced it with Bilsteins and man did it make a difference. The look is the same, but the ride and handling has improved greatly. In addition, the spacers began to protrude where the strut is located. It's not the right way to do it, they say what they do, but it's what they do.

Kyng May

| Dec 28, 2020

These came in almost a week sooner than the estimated shipping time, and the installation was done by an expert mechanic, but other than that, the truck rides better, feels taller, it actually raised the front about 3 inches, and it matches the rear perfectly, I'll attach photos.

Hayley Hall

| Aug 17, 2020

You can feel the quality of these right away when you open the box and hold it in your hand. There were no gaps between the bolt holes. Observe these 3 important rules when installing a new system Firstly, enter 1. It is a good idea to watch at least one or two videos of the installation on YouTube so you can see where other people had difficulty so you don't You can curse when you hit your knuckle on the floor if you leave yourself extra time for a beer and cursing. 3.
The strut bolts must be installed from the top, so you should remove the wheelwell liners if you have the time and the tools.

If you don't, I am pretty sure you will be missing a few layers of skin from your hand. My truck looks a lot better now with this level and I'm so excited to get my new wheels and tires! It is a great way to get a great look at a reasonable price!.

Lionel Archer

| Nov 14, 2020