GenExhaust for Predator/Universal with Large Weld Bead Generator 1" Steel Exhaust Extension 1-1/2 Foot Length.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In the case of exhausts with a 15/16" to 1" diameter, you might be required to adapt to it. IGs may have some information, but I am not sure.
Any generation of devices will work with it. To attach your muffler, you will need to weld a nipple (supplied)
Yes, it would work, though the ASIN B07HFJY8MJ would be a better fit for your system. That number can be searched on Amazon, and there are also many other lengths available.
Yes, I agree! As a result of exhaust fumes, you are not safe if you don't.
Selected User Reviews For GenExhaust for Predator/Universal with Large Weld Bead Generator 1" Steel Exhaust Extension 1-1/2 Foot Length.
I have a newer WESTINGHOUSE 9500/12500 watt generator, and this kit fits perfectly on the exhaust pipe when the spark arrestor is removed from the tip. negative aspect is that it is expensive for what you get, but I am not sorry I purchased this kit because I find it As for my experience with the generator, I have only run it for 30 minutes and it worked well during that period, however, I will update this review if there are issues when I run it for a longer period.
(DuroMax XP13000EH) with some modifications. As part of my recent installation of my generator on the side of my house, I wanted to vent the exhaust outside of the enclosure so that the heat generated in operation would be reduced. Although I will not have an exact measurement of the exhaust diameter of the generator, I had to ream out the inside of the connector to get it to fit over the exhaust pipe. In addition, I drilled and tapped two set screws to secure it in place, thereby avoiding having to weld it to the bottom. Using this method, it will be easier to remove the generator if I need to use it outside.
A flange needs to be welded on to the exhaust tailpiece, and then the extension needs to be bolted on. I am satisfied with the results. To keep the fumes out, we place the generator in the storage shipping container at our construction site, then run the hose out the door. In this way, we do not need to drag the generator into our system The weather is always nice outside. The product is expensive for what it is, which is a flange and a long length of old fashioned gas can nozzle hose. But there actually isn't much competition for the product, and it works, so we are fine So, knock off one star for the.
This house is built well and solidly. The rest of the item is a nice item. I thought the cover would bend close to 180 degrees to return A few modifications were made to the exhaust route, otherwise it worked.
There is good quality in the parts. (See photos) I had a welder do the welding. In fact, he melted some of the steel, but then used a MIG welder to reconnect it with metal. As a result of the adapter exceeding the opening of the factor, I had to cut the muffler protection grid. I didn't think that was too big a The grill was painted with a heat-tolerant paint (Rustoleum BBQ In this case, an angle grinder and paint will be needed.
The spark gauze is going to clog up in the near future anyway, so remove it. I built a small 1" tractor rain cap on top of our exhaust and routed it up over the camper to the roof via the flex pipe. It's surprisingly quiet now with exhaust routed up to the roof via the flex pipe. I smelled nothing at all!.
My generator enclosure exhaust duct is the perfect length to route out of my enclosure, and the installation was very simple. It was the hardest part to separate the generator muffler from the generator so we could attach the adapter.
It's for my mobile detailing set-up and I needed the 8 foot extension to make the whole set up complete. The material is extremely flexible and it can handle a lot of heat abuse.