Dorman 902-2009 Engine Coolant Thermostat Housing Compatible with Select Models
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If your 78 Toyota water jacket is compatible with a 74 Pontiac Firebird Bird 350 engine,
There are two sizes available. 3/8 npt is the number one. I'm not sure what the other one is called, but it's a smaller one.
If your k5 water outlet is supposed to point from the center of the engine to the driver's front corner of the car, then yes, this is a sbc part. Look at where the upper radiator hose connects to the radiator. Take a look under the hood to see what's going on.
This isn't going to work. Not a good idea.
Selected User Reviews For Dorman 902-2009 Engine Coolant Thermostat Housing Compatible with Select Models
I bought two of these from different places and they both had the same flaw - The casting is poor, and the port that should fit over the thermostat is oval rather than round- It's not even close to being a perfect circle. The image above has not been stretched in any way. That's how bad it is. It's plain to see that it's not round. In one direction, it's almost a quarter inch wider than the other. It does not fit properly and leaks as a result. I got one from an online retailer and the other from a local parts store - They were both having problems with the same thing. If you don't want to be frustrated by the lack of quality control, don't buy this part.
Honestly, the best one for the money that didn't have hideous chrome on it that immediately leaked, and had extra ports that I was able to block after tightening way more than I thought was necessary and pipe taping them.
It appears to be exactly as I anticipated, with the exception that the finish is slightly smoother than depicted. The gasket in the photo is loose in the box, which I eventually discovered. This housing has two sensor ports, one of which is 3/8" in diameter. The threads on the 3/8" port appear to be a little uneven, and I'm having some difficulty threading the fitting I bought into the housing. With a little WD40 and a longer wrench, I believe those threads will work. Designed in China.
The reusable aluminum gasket with the orange rubber seal that I purchased works perfectly. The clearance on the side where the neck points is too tight, preventing proper torque with the bolts on my engine; I'll be switching to 3/8-inch bolts. 16 x 1- Allen bolt, 1/2" diameter.
This water neck is a HEAVY WATER NECK! THE BASE IS MADE OF THICK ALUMINUM. This housing will never break or deform in my opinion. No sealer was required because the provided bung plugs were tight. I took out the bungs and put sealer in their place. Everything went smoothly. I used a simple file to touch up the outlet in two spots where there were tiny burrs; it's a great product for the money. It's the perfect size for a 350 sbc.
It might work on other styles, especially older ones, but it didn't work on my OBS truck, a 93 Chevy, because it caused my heater hose to turn towards the alternator. Before you buy, double-check that you have the proper angles.
Don't be fooled by the low price; the product I received was exactly as shown in the photo. It is far more durable than the original, and it appears to be much more beefy and robust. The gasket flange is particularly important. It has made me very happy. It even came with a gasket.
One that pointed straight out was what I needed.