Liqui Moly (20002) Cera Tec Friction Modifier - 300 ml

Faith is a good thing. The time has elapsed since I wrote my last review, so I haven't yet decided which opinion is more accurate. Several years ago, my daughter really wanted a 328i, so I went and found her a clean, single owner car with just a little over 100k miles Though it's the first BMW in our family, I've seen and worked on them all as a mechanic. A BMW N52 engine seems to be overly complicated given what it has to do. This engine offers average power and mileage even though its got just about every bell and whistle, including a variable valve timing system. There was a lot of noise, and I found that interesting. Kind of like a sewing machine. I changed the oil to Mobil 1 0w/40 Euro blend and she drove it for 7,000 At this point I read up on the different LL/01 oils for this car, so the next time I changed the oil I used Castrol Edge, which is a LL/01 qualified oil. Differences do not exist. I learn this CeraTec additive and decide to give it a try based on the positive reviews. The car keeps running well, still sounds like a sewing machine. Then I go another 7k miles. Looks like an Orange Julius to me! I dump it out, and then I walk around the block with it. I think that it might be my faulty memory, however my engine sounds a little quieter and smoother. After I slam the hood, I hand the keys back to my daughter and she takes off.
And here we get to the good stuff. I am embarrassed by the lack of car knowledge my daughter, 19, has. A real girl who doesn't back down when she's under pressure. After a couple of weeks, we are sitting at the dinner table and she says, "I heard from the doctors that I have CeraTec. ". It has been a while since I thanked you for tuning up my car. I forgot to thank you. " When I ask her what she means by that, she says, "I did not do anything illegal. " The woman says that since her last service, she has noticed that she is idling at red lights more smoothly and with a quieter whisper. As the radio is always at least half volume, she asked me how she can tell. (Remember, she's driven it for more than 7,500 miles at this point). As long as the car is running and she has the window down, she says she will order at the drive-through When you used to tickle it, it used to go "tickity-tick" As it echoed off the building, it was tickity (her words). After a while, it went quiet. Roll down the window and stick my head out. I fire it up and roll it up. Yeah, that's right. This was a very quiet and smooth operation. In addition, the average MPG is displayed continuously , and she has seen an increase. The fuel efficiency is 65 miles per gallon. When you add all that up, it seems to make sense. In liquid form As of 2010, Moly said it would last 30 thousand The service for the car will take place soon, so we'll see if this is all the same after it gets serviced. Since the car does not use oil between services, I have no insight into As a matter of smoothness, quietness, if my daughter did not mention it without my prompting, that's what made me a believer more than anything else. Liquid thanks for your kind words Oh my gosh.

Vivian Clay

| Apr 09, 2021

The engine count is zero! My 2018 Mustang GT 5 is equipped with this. 0 - to determine if it would help in eliminating the "typewriter" or barbecue "ignitor tick" for which these engines are notorious. I have added 1 bottle, 300ml, to the 10qts of Mobile One 5W- In an oil pan, there are 30 quarts. It has been a great experience. The tick is no longer present, and the engine is extremely quiet when idling. It couldn't have been better!.

Jake Silva

| May 28, 2021

The driver, with a 6. 9 Liter gasoline engine, is driving a 26-year-old HMMWV. There is a 2L motor with a rebuild tag on it from Fort. The document is dated 2009 and has Lewis, WA on it. Records from a North Carolina unit indicate that the truck had about 37,000 miles on it when it was turned in. This is what the speedometer looked like I had to replace the odometer because it had broken. Last year, we changed the oil and changed out the instruments since they were outdated and unreliable. Some of the lenses were foggy or hazy, and would not As a result, I don't drive it much, only put in about 30 hours running this past year. I probably traveled 350 miles in its lifetime. This corresponds to A 6 in the following table. Engines with 2L pistons are underpowered, and they're used in quite a few GM vehicles, as well as many M-models The combined unmanned combat vehicles (CUCVs and HMMWVs) have their own set of So I started reading about additives since I wanted to get some "insurance. " What is the benefit of oil additives? I use a gas additive, but what is the benefit of I put a 1- on the list, based on the testimony of many of those who have used it, as well as the testimony from the manufacturer, Liqui Moly. When I changed the oil in the engine for the last time, I put half a bottle of this stuff in (around 8 quarts of this stuff) The oil filter system in my car has two filters. I drove it for maybe 50 miles since then, and there seems to be something wrong. This is true1. I hear a difference in the engine's sound. The sound seems to be quieter than it was. I might be losing more of my hearing, though. Featured b. 2. Cooler air is being drawn into the engine. Temperature is around 5 degrees Fahrenheit. When temperatures are similar and the cooling fan kicks in and goes off faster, it doesn't kick in as often. 1. 2. 3. There is a lot to learn from this one. In my previous post, I mentioned that I had thought about replacing my oil pressure sensor. It was normal to run the oil pressure at speed around 60 psi and to drop to half that at idle on most days. I am reading a book (dash) There are two answers to (item 10, Operator's manual) 40 - 60 mph are the normal speeds The system is set to 50 psi, with an idle pressure of The most I get at speed is about 50 psi, and I get about 20 psi at In my interpretation, from my medical understanding of physiology, fluid dynamics (Poiseilles law, et al) is that, as the oil moves more rapidly with less peripheral resistance, more energy is being produced. Blood pressure is like that of human beings. A high systolic pressure is a sign of blocked flow downstream, and an elevated diastolic pressure indicates vascular tone or the remaining pressure in the vessel when the pump (your heart) is not sending pressure or output. I don't know. The answer to that is unknown to me. The theory I have is my own, and I intend to stick to 4 * . After the truck has sat for a few days, I am not seeing the puff of white smoke that I would see when I would start it. I was pleasantly surprised by that. When the weather gets cooler or something, maybe it will return, but it has been six weeks since it happened. There are some pretty cool videos here I have only seen white smoke (unburned fuel) a few times on cooler days since I installed this stuff. Perhaps it has nothing to do with the Ceratec, perhaps it was a leaky injector that was closed by the additive, I can't be sure, but it is common when I start up my HMMWV in the morning to hear a puff of diesel vapors. In the family I have 2 sisters and one brother - My brother and sister-in-law have a similar HMMWV, an H1 diesel model a year younger than mine, and they have over 200 thousand miles on the same engine. Perhaps I should ask him what kind of motor oil he uses, if any. I have another bottle (and a half) that I will be using at the next oil change and I plan Yes, it's all anecdotal and your mileage may vary. It might all be in my head, but it doesn't seem likely. When my oil changes come up, I'll make sure I post an update.

Melany Moss

| Dec 10, 2020

Because my 2006 Porsche Cayenne Turbo had to contend with a harsh, cold Illinois winter, there are slight scuffs on the cylinder bores. Moreover, I noticed that the valve lifters were rattling as well as clacking After running the Orange Julius 200 miles, there is some type of noise The Ceratec friction modifier comes in various colors. After the engine resounds like new, it sounds like it was just installed. There was a whirring of the wind like a well Using the oiled Turbine, the smooth marine V8 drone is now traveling at freeway speeds. Recently, I used an Endoscope to look at the cylinder bores, and the surface appears to have a glassy appearance Sheen and coating are both examples of coatings. A new mile is added to the total. The number of miles per gallon and oil consumption both decreased. It won't clog. Don't worry, the particulate matter will not clog. The nano hexagonal Boron Nitride will fuse to the cylinder walls once it is installed on the oil filters and once they are in place. If you don't use abrasive honing, you probably won't even get the coating off. Despite the Germans' love for making good stuff, ShamWow Vince says it is the Germans who make the best It is obvious that this is NOT an The review was not financially compensated (I did not receive any stipend for this review).

Kamden Leon

| Dec 14, 2020