Fahren H4/9003/HB2 LED Headlight Bulbs, 60W 12000 Lumens Super Bright LED Headlights Conversion Kit 6500K Cool White IP68 Waterproof
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
To fit my boot, I had to cut it. By using the boot, your assembly will not become clogged with debris and water
Usually, I check the auto parts store and have them look it up for me. There are times when a big-scale disaster occurs In the automotive section of the big box store, books will be available. The rest of the time, I will do some research.
This should fit on both a high and low level. You have to decide if they're worth it before you buy, and the answer relates a lot to the person you are. Yes, if you use stock lights and cannot see any road signs while driving at night. It is probably not a good idea if you always drive during the day and never turn on your lights. In addition, there are better LEDs out there, and there always will be, but they are more expensive. They are a good value compared to what they offer
There are other bulbs from other manufacturers you can find as well. Type in the make, the year, and the model. The one that fits them can be easily identified
Selected User Reviews For Fahren H4/9003/HB2 LED Headlight Bulbs, 60W 12000 Lumens Super Bright LED Headlights Conversion Kit 6500K Cool White IP68 Waterproof
(the h4/9003). Please see https//www. nbsp In order to test out LED light bulbs in my newly purchased car (2005 Infiniti G35) I purchased this product. It flickers after a few months on my other car when I bought a few led bulbs before this. I haven't been able to fix this. I had been hesitant to try a new one ever since, but now I have the courage to try it out Install
It is a bit trickier to work on my G35 than my Toyota, but it's completely doable. Since each car has a different way to access the bulb, I had to work around that. Installing this product is straight forward and easy. *Build I feel pretty good quality when I hold the bulbs in my hands. Compared to other fans, this one is rather slim and does not stick out much. In addition, a rubber seal around the LED bulb helps prevent moisture from entering the bulb. During testing, when the bulb is plugged in only, the fan starts spinning up, but no noise is heard (checking the bulb at night when I live in a quiet space). Brilliance * Brilliance I would say the LEDs are a big improvement over my halogens as far as brightness is concerned. I am able to see far with these LED bulbs when driving at night and there are no streetlights. A video and comparison pictures can be found below.
Those are the brightest bulbs I have ever installed in my Honda. It took me 12 minutes to slip it on. I love how white it is. Despite the fact that it has a reputation for having dark headlights, I have a 2011 Crav. I was able to resolve my issue with these. Here you see an old bulb on the left and the new one on the right. Let us see how long it lasts.
I was very impressed by the packaging, as it made me feel like I was getting a premium product. I bought these bulbs as they are brighter (12,000 lumens) than the other bulbs I currently The brightness of both appears to be about the same. It is hot Also, the sink doesn't adequately cool it down (solid heat-sink Inland sea). They got pretty warm to the touch after a few minutes of being turned on and tested. Last time, I barely felt any heat (finned heat-- There is more surface area for heat to dissipate in a sink). My satisfaction with this LED purchase would have been higher if it were my first LED purchase, however, having used a product previously that was essentially better in two of the three categories I evaluated, I am only moderately satisfied with my purchase. In the first headlight image, the LEDs can be seen on both sides, while in the second, only the left bulb is the new LED.
In summary, you will not be disappointed if you purchase these. You may be able to obtain a better solution if you have checked out the internet.
Please see https//www. nbsp To equip my 2004 Honda Cr-V, I bought a set of Fahren H4/9003/HB2 LED headlight bulbs You can use a halogen bulb to replace the old one. An excellent LED bulb to use both at night and in the day. At 60W, these 9003/H4 LED headlight bulbs provide a decent amount of light output. There should not be too much illumination to obstruct oncoming traffic, but there should be enough to light One of the best features of these LEDs is the quiet fan. They are comparable to other LEDs on the market. While they are on, there's no hum or anything like that! A set of LED headlights is a great choice for anyone who is looking for lighting. The cost is affordable, the install is easy and the lighting is bright.
I am amazed! I get it. Here are some points to consider. First of all. . I am stunned. When I was driving at night without those lights, I had no idea how dangerous it was. I installed it when I first started using it. My perception of the difference was very different. I am speechless at the beauty of those led bulbs. In a literal sense, you can see a long distance The ones on my car are bad because they came from the factory. With this new version, the installation is very straightforward. If you are nervous about doing something wrong, you can watch a video online. Depending on the light, you may need to take 5-10 minutes to install each one. This is not a bad result. In this case, there is no It's something I use day and night. I trust it. The proof will be in the pudding. The difference is significant.
not been included in the listing (it's in the back of the included manual, but it's not helpful to a first-time buyer) I would have never bought them, or I would have bought a compatible dust cover that would go with mine Moreover, the three metal prongs on the plug do not fully penetrate the electrical plug, so I have a 1/4" space between the electrical plug and the prongs on both units that could allow water to enter. Electric tape had to be used to wrap that. The second pair I plan to buy won't be a replacement when these fail.
The color temperature is beautiful, and there is plenty of light emitted from them. This image has a surprising amount of UV content, as lines and signs near the border look like they're painted in the sunlight. It seems that the beam pattern (see photo) is backwards for the US market, as the cut off pattern appears to be circular. I haven't had any complaints so far, however. look like they're made from high-quality materials, so I'm hoping they'll last for a very long time. I was also thrilled with the way they went together. Changing a light bulb is kind of like that.
An extremely bright light that is white-blue in color. Keep the 5000K at 6500K - since it is on the blue side, keep the 6500K at 5000K. In the case of white light, 6000K would be the optimal temperature. I thought the new bulbs were well made, and the filament heights matched the old bulbs for both high and low beams. Using the instructions, I was able to install the unit. However, the cable is located too far forward and you really have to force it into the rubber boot on my Tacoma to install it. In other bulbs, the cable shows up at the rear of the bulb, sticking out of the boot. That leaves the nice rubber seal for when the bulb is in place. Neither my boot nor I want to be cut. As a result, I did not need to adjust the light, probably because the bulbs were close in size. Generally speaking, if you don't mind the blue tint and can manage to get the cable in the rubber seal, this should be a good bulb.