4PCS Daytime Running LED Light COB 12V Light Strips Universal Waterproof Car Trucks DRL Illuminating Headlight Parking Lamp Housing Fog Lamp(Blue)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A hot wire and a ground wire are wired into each light separately. Depending on your preference, the leads can be cut.
We recommend that the input voltage be between DC 10V and 12V There is no working current when the voltage is 12V. A colour temperature of 6000K-65 is used in 29A You need 8000 K. A net weight of 14g can be found in the product. It measures 17 inches. A measurement of 3cm times 1. Measure 7 cm by 0 cm. Each of these dimensions is 5cm (L*W*H). Please accept my sincere thanks for your help.
Thank you for your question. We have black frames with strips.
Although the black frame might appear to be black, it I have curved the blue ones like these to fit the inner liners of fender compartments and all of them have worked
Selected User Reviews For 4PCS Daytime Running LED Light COB 12V Light Strips Universal Waterproof Car Trucks DRL Illuminating Headlight Parking Lamp Housing Fog Lamp(Blue)
**A two-month I came home from work tonight and realized that the lights were flickering, then went out, started smoking, and caught on fire.
They've been working perfectly for 2 months, so I have no idea In reply, I received an email offering to send out new replacement lights for no charge from the manufacturer. had bought these for the purpose of adding an added layer of visibility to my recumbent bike. However, I have not yet tested them in the rain. I love how bright they are! The lights are like flood lights, so if you plan on mounting them on the front of a vehicle, position them so that their beams are pointing toward the ground because they're not directional at all, but instead saturate everything with light. They don't bend easily and the adhesive is quite sticky. I like the metal frame as it keeps them rigid. It is well worth the money to buy these lights. It is hoped that they will withstand.
The only downside is that even though they are extremely bright and easy to install, they also get Having a burn blister on their neck from touching the back of the LED The wiring where the wires attached to the light is pulling back its insulation in places, leaving bare wire close to the metal behind. Two of them have been on for less than one hour. The risk of fire is great and this could short out on a $50,000 4Runner Limited which has a high potential to catch fire. I took a break from work. I will see if the item can be returned or replaced.
Everybody complains that the wires are thin, flimsy, and aren't very solid. People, you get what you pay for! Double-sided tape was used to stabilize these after I took them out of the frame On top of this I put a 3/4" x 48" bar of aluminum from The Home Depot as a heatsink that I cut to size. I resoldered all the connections in I have never experienced overheating or burning out during my use of these. I spent about $15 on all in all. As soon as you are done, you will notice they have no ip protection or waterproof material at all. I would recommend using some high heat silicon on the solder pads or laminating these to make them water-resistant (use some aluminum flat bar to provide.
The lights were beautiful, EXCEPT for one thing. However, the wiring on these lamps is too thin. Other than that, these lamps are The additional bulbs I bought are super bright, and I installed them in less than 30 minutes using a toggle switch with a Definitely recommend these. I hate trash, and if I could, I would send it back as soon as possible. They are the kind of lights that anyone looking for bright lights for their cars or trucks will find useful.
I love how bright the LED is! In addition to being extremely bright, the LED strips have been designed to be easy to wire and install. However, they are very A radio-controlled car was made from them. There is a metal frame where a wire comes off the LED strip that is very sharp, and the housing is thin and flimsy. It is crucial that you move the wires carefully or secure them securely. A double-sided adhesive is included with each LED strip There is a sticky foam strip attached to the strip, which helps hold the strip tight in the frame. The LED strips include both positive and negative wires, so you can solder additional wires if you wish.
Light up your life with these Brightness, area of coverage, current draw, etc. Unfortunately I cannot provide a life estimate since I only use them in the evening and at night for a few hours on a daily basis.
As long as you're looking at this item, you know you will have to modify it or install In the end, there was only one issue The wires that are currently soldered to the light are extremely small. I'm thinking 20 gauge or There is not a soldering pad on which to change the wires and place a larger one.
There are 4 thin sheets of metal with tiny wires at the top, and then a metal frame goes on, without any insulation (begging for a short). Mine were broken upon arrival and one of the LEDs was dead, so I just threw them away.
Related Products For 4PCS Daytime Running LED Light COB 12V Light Strips Universal Waterproof Car Trucks DRL Illuminating Headlight Parking Lamp Housing Fog Lamp(Blue)
