ZL1 Addons Stealth Two Piece Wicker Bill with Standard Edge - Compatible with 2015-2021 Charger
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is a polished edge on mine. It requires a separate purchase of a Rivnut gun as well.
As long as you keep the stock spoiler that came with the car, it will fit 2017 and 2018 Scat Packs.
All of the edges are smooth, and the material used is a tempered Lexan. The spark plug will have to be secured with a type of rivet gun. However, you should still be able to use any bolt you prefer as long as they are the same grade and size.
The answer is yes
Selected User Reviews For ZL1 Addons Stealth Two Piece Wicker Bill with Standard Edge - Compatible with 2015-2021 Charger
It's a great looking product, and I love how the color matched hardware matches. You don't need to buy an expensive Rivit gun, just make sure it's not too cheap. It was a luxury to have vinyl help me with the dead center as I measured every inch and took my time. Take your time. A few notes. Make sure the spoiler area is clean with something that isn't In a 50/50 mixture of alcohol and water, I used. Tape sticks better when it is sticky. The first hole needs to be drilled and mounted, then tape the rest of the holes and mark them. There is only one thing left to do.
To go with my girlfriend's 392 charger, I bought the wicker bill. In addition to loving the aggressive part, she was very excited to receive it. It was decided not to install the middle piece, and to install the main piece only. Thanks to the seller, we were provided with new hardware when the bolts we got weren't long enough. The seller has made it right and sent new hardware as quick as possible. The middle piece was too much for her, so she left it off. You do not want to flush the system away in your trunk if doing the install. To keep the spoiler from slamming into the paint, I recommend using two nickels for spacing. This lesson was learned the hard way and we ended up drilling out holes and purchasing larger washers to raise it.
I am very happy with the quality of the product. I made the installation myself and did not need to take it to a shop. During the installation, you should keep in mind the following points. Once you've measured each time, drill a hole. It is easier to keep track of tools and parts if they are laid out. A new spoiler must be drilled and polished, and the biggest part is getting over it. The installation of this product was fun. Thanks for a great product. My wish would be for the spoiler to come with a ZL1 decal on the side, it looked very cool in the advertisement.
Although this piece looks beautiful on a car and is not technically difficult to install, it is very nerve-wracking to install. It's mentally exhausting to drill into a brand new car, to be honest, but let's be honest, it hurts. Does it make sense to invest in it? Because I don't believe that, I think the price is too high and they ought to lower it. Apart from that, I think it's a very nice addition to my car and I hope I'll have it for a long time.
The clear piece completely transforms the look of your car. I like the attention to detail they show when they include it. Nevertheless, I did use self drilling screws to save time and money since they came with rivets that you have to use a special tool for and you get good instructions. If you plan to drill the hole through that route, do it first or the spoiler may crack.
You didn't even include the necessary hardware for it to work? Is there a reason why you are not disclosing this information? It's clear it takes a rivet gun to do the job of installing all the rivets and bolts into the spoiler, but it didn't come with any fasteners! In order to use Nascar bolts, I needed to go to the store and buy them. But that's just Please do not charge me for the wicker bill and do not include the screws and bolts just for installation.
I would recommend Wicker bill because it is very high quality! Although it was hard for me to put the wicker bill on my first go around. If u r doing this by yourself, leave a gap between your trunk and the wicker bill or it'll hit the paint on your trunk and scratch it badly! My charger 06 fits on it, and I think it looks great for the original charger. Good luck!.
My husband is in love with our new tool! It was somewhat difficult to put on at first, but after we put the first bolt in, it was easy! You can take your time with it! This is well worth the expense and will make your car stand out from the crowd!.