Rugged Liner Rear Wheel Well Liner | WWD19 | Fits 2019 - 2021 Dodge Ram 1500/2500/3500 (will not fit dually or w/5th wheel)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is 100% certain that these will As you look directly at the wheel well, it was only a hair away from the 11 o'clock to 1 o'clock position. It is definitely possible to make them work if you are handy. In case a photo can be added later, I will do so.
Certainly, these fit a 2020 Ram 2500. I just installed them on mine, and you have to take out the front half liner (throw it away). The rear liner is different from the standard Mopar liner, which I found out after watching a few YouTube videos. You will only use the half of the rear liner that has the clip nuts attached. It is plastic welded together, so separate it and use only one half. With a 1/2" drill bit, I was able to remove the plastic welds. Now I'm ready to reinstall them. It is recommended that you keep the bolt nuts intact/attached since you will be using Reinstall the rear half liner, lengthen the liner, then measure all the bolt holes in the Rugged liner to determine where you can reuse the clip bolts - they are smaller than the holes for the push pins. Considering that I have fender flares, it was necessary for me to reuse the clip nuts. It is also possible to use push pins where the clip nuts are supposed to go, but you will need to drill out your fender holes first. It's not a good idea to do this as you might soon find yourself with rusty metals. There is also a part of the Rugger liner that does not have a hole in the second from the bottom slot for the clip nuts. In order to make the holes, I simply used a Dremel tool to install the rugged liner. If everything is already partially installed, it is easier to line everything up. It may have taken me longer than it should have because I am a very meticulous person. We spent a little over three hours on that.
None of the holes have been predrilled, and there is no hardware
I don't think that's the case
Selected User Reviews For Rugged Liner Rear Wheel Well Liner | WWD19 | Fits 2019 - 2021 Dodge Ram 1500/2500/3500 (will not fit dually or w/5th wheel)
I had a 2020 Ram 2500 with a 6' 4" box and these fit fine. There is no reason why other people are having problems, unless maybe they received faulty It is necessary to remove the plastic "partial" liners at the front and rear of the fender openings. By removing the metal clips and screws from those pieces, I was able to reuse them with the Rugged Liner, instead of using the plastic rivets included with the liner. In terms of installation, it isn't too problematic. In order to get everything lined up, the liner does need to be wrangled a bit. For some reason, the liner on the passenger side fit better than that on the driver side. Although the instructions are minimal, if you have any mechanical inclination, you are unlikely to need them. Everything seems obvious in terms of how it should go Although I guess it's not a big deal, I still can't believe that plastic wheel wells are an extra charge A $50k-opportunity for a long time There is a truck as well. The fact that Rugged Liners offer a USA-made product is a great idea This was a solution that was made. As of right now, Mopar doesn't list wheel house liners for the 2020 2500 in its.
It's all right. I think you'll like the results if you are handy. All you see is what was necessary to remove for a snug/stable fit, so do not worry about the scraps. There was a '06/2500 when this occurred.
There is a reason why I gave it a low rating because you do learn in the entire ad that it will also fit a 2020 Ram 2500. I didn't receive them, #2 they were zip tied together without a box, they also did not include mounting instructions, and they were missing mounting hardware. There is almost no way to return a product except through It was great to be able to work with them.
There are different sizes of wheel well liners, but there are the ones for my 2021 Ram 1500. Not sure why Dodge cut corners on wheel well liners, but thankfully these exist. Installing this car is much easier than it is for the Mopar In total, there was about 15 minutes work for both sides. I recommend leaving the sheets in the sun for a bit before installing them to make them more pliable, I didn't and had to work with them quite Their price is right on point, and they offer great protection at a lower price than OEM options.
The factory OEM liners in my 2017 Ram 2500 were in good condition Due to the fact that the covers were about 5 inches lower than OEM, I ordered them. The purchase is set to take place in In the future, I will try to add photos showing There are factory lines at all of the following The odds of 10 to 1 are almost there. The height of 11 (1/10 in) A piece of 'Rugged Liners' measuring at the edge is as follows A ratio of 8 to 0 A 10-digit number The boltholes on the inner and outer sides and the cupped surrounding areas are as follows This part of the liner appears to be prone to being pushed in or "dimpled", so there is no integrity to this. The liner was constructed by riveting the fender side to the body and bolting the liner to the inner portion of the body. Only two bolt holes were left on the inner portion. I will return them due to the thin plastic and insufficient durability over the long term. My attempt to resolve this with the manufacturer ended when they deemed the liners as not acceptable and an invoice I generated from my Amazon order page as unacceptable however, all correspondence with the manufacturer has been unsuccessful My response to them was that I needed to send a "photo of the receipt". I also had to provide a picture of the "bright yellow manufacture tag" which I had removed before This tag was too important to leave in the field just to have it thrown away at a later date. I have no choice but to return them to Amazon since I am unable to resolve this issue with Rugged Liner. In my view, the issue with Rugged Liner was not Amazon's and I was not inclined to involve them, but at this point Rugged Liner does not provide anything for me. I have reviewed many items and I invite shoppers to take a look at my other reviews before lowering the price of this item.
It makes such a difference to the appearance of these. Due to some reason, Dodge no longer offers these with its new models. Therefore, there is no view of the bottom of the mattress and the suspension at the rear. As a result of the white color of my truck, the 17" tires look extremely small. In addition to the directions, the covers came with push pin fasteners, but it can be somewhat difficult unless you have some knowledge of basic automotive skills. I'm no beginner, so here are a few tips for installation. There is a 2020 Ram 2500 Tradesman (same as the "classic" model). A partial cover is located in front and a partial cover is located in the back of each rear wheel well. In order to remove the front cover, you must remove it completely. This cover can be used on the new liner if the clips are removed. If you are going to use the old clips, you may need to enlarge the predrilled holes. Furthermore, if you prefer not to use the old clips in favor of push pins, you can just leave the holes as they are. You will need to remove or significantly loosen all but one of the screws holding the back cover in place. Remove or loosen the screw holding the back cover to the bed, but do not remove it. In order to insert the liner between the cover and the sheet metal, the cover only needs to be loose enough. Remove the rear cover carefully so as not to damage the rear cover. Similar to the braces in the front, it braces the rear of the quarter panel as well. The liner should be inserted and positioned in the right place. Screw every screw in place and finger tighten it. There is a clip in the seam of the bed that connects the hole on the backside with the hole on the front. The back hole will require you to drill another hole in the seam for either a sheet metal screw and washer (black) or a clip and machine screw and washer (again, Make sure all screw heads are tight. After that, I used two of the pushpins per side in the 11. In the mornings between 00 and 01 A total of 00 positions have been filled. A mallet made out of plastic was used to tap them in. You can then install the push pins after you have tightened the screws, ensuring that the liner is held securely in place while you do so. There are two parts for the left and right side of the car. If you mix them up, the predrilled holes will not line up with each other. It took me about 45 minutes to finish driving the right side. Taking this long was due to me learning on the fly as I went, and more so because I removed the back cover without saving anything. I had a hard time getting to the screw holding the bed piece to the piece backed by a piece of wood. There is no need to remove or even loosen it. After a 10-minute passenger side, I moved on to the driver's side It takes about 15 minutes. It will surely assist those who do not operate mechanically. From what I've read in the reviews and based on my own experience, I don't understand some of the difficulties others have faced. I was pleased with the overall appearance of my new truck after installing these liners.
The 2007 Dodge Ram 1500 doesn't have these - but there aren't any for the older models anymore - so I bought these. Quite a bit of trimming is required to get them to fit well, but it's not a major problem.
Related Products For Rugged Liner Rear Wheel Well Liner | WWD19 | Fits 2019 - 2021 Dodge Ram 1500/2500/3500 (will not fit dually or w/5th wheel)
