FASTTOBUY Multifunction Hot Foil Stamping Machine 110V Leather Punch Bronzing Pressing Mark Machine 5X7cm with Foil Paper Holder for Leather PU Paper Logo Embossing

A game is being played on this machine What a change! This afternoon I spent all afternoon customizing my stuff with this hot foil stamping machine. You just plug it in, wait about three minutes for the temperature to reach the required level, and you're done. Even a little foil for practice comes with the machine, and the letters can be changed easily with brass inserts. As a result, the machine is small enough to not be a hindrance. I'm excited to get started on new.

Charlee Marsh

| Jan 28, 2021

It takes a lot of time to learn the machine itself. After many attempts failing and experimenting with the temperatures, we finally got it right and got the temperature right. There is only one manual and a few extra fuses included when the machine is purchased without extras. You'll have to navigate and learn how to use all the functions of the machine yourself since the manual is in Chinese. We ordered a custom die from the seller and it cost us A 5" x 1" photo would fit in this space. I received the die very quickly even though it was shipped from China. We were able to achieve a great result with our die and setting it the way that worked well for us. Although we were hesitant when we received the machine and even considered returning it, I'm very glad we kept on trying because it has made a huge difference in the way our packaging looks.

Jenna Ellis

| Sep 22, 2020

This is my first time owning a computer. I liked how well it was built and how easily it could be assembled. With it, you'll get all the tools you need to adjust the unit, as well as Unlike some other dies, it did NOT come with a screw to attach a die to it. Since I do not have documentation on how large the mounting hole is, I am not sure of its dimensions. Additionally, it was not included in the parts list, so I'm not sure if it is supposed to be included. I'm a leather guy who also works with veg-tan leather, but don't have as much time to do it You'll notice that this does not make a deep impression on natural However, I need to play around with it a bit more. Although I haven't tried it with foil yet, I would imagine it will be a shallow foil It was a 180C setting and a 15 second press that gave me a good print. Pulling down the handle is also a bit difficult as a result of the force required. In order to use both hands, I have to use two. Two levers are needed for the machine to be stabilized and the handle to be lowered.

If I begin to see better results then I might update this. The part is so small that running to the store to fabricate my maker's mark is going to be a lot of work. There is nothing more important than pressing a design into some kind of material with this machine. If it came with the hardware to attach the design, you'd assume it would have it.

Karsyn Rose

| Jul 31, 2020

The Komatex line consists of 250 pieces. There was no hot stamp machine at home. We ordered one from Amazon instead. The search was made at com, where machines that could do the job were found. Despite its size and reasonable price, we chose to purchase this machine since it was of sufficient size and of sufficient price. I was not disappointed by it when it arrived. I was very pleased with how well it was packaged and how easy it was We were ready to go as soon as we had set the type and attached the tray to the heated platen. You should note You must purchase the type tray and type tray cover separately, as they are not included in this package. The platen will heat up in only a few minutes, and then you will be able to begin your test stamping. By adjusting the height of the platen to your workpiece, you can calibrate the pressure, and by experimenting with the heat setting you can adjust the temperature. As soon as the base is set up, you can put some tape on it to serve as alignment marks so that you can accurately place the work piece for consistent In addition to the grid, there is a marking on the base. As a whole, we are very pleased with the machine, for it performed flawlessly at stamping 3,500 parts on this project. As a matter of fact, the customer loved the foil.

Ariel Robbins

| Nov 29, 2020

I was extremely pleased with how easy it was to assemble, not only was there a manual to assist you, but it was also very intuitive to put In the box was a sample of foil, thermal tape, some tools, and replacement parts. In addition to the letter holder, I order a set of letters and the same company, so I was able to test it immediately. The embossing machine worked quite well on foil and bookcloth without any settings having to be adjusted (it was set at 150 degrees). I contacted the vendor to ask about the product as well as to order some brass molds. They answered the same day and they were extremely helpful. I have so far been very happy with everything.

Wallace Hahn

| May 27, 2021

You will want to test this unit every time the leather or finish on leather changes because it does a great job and is very consistent. You can get the time and the temperature once you know them. There is no difference in the appearance of imprints.

Keira CONNOLLY

| Mar 04, 2021

I bought it about four months ago, and I am very satisfied with it. While the manual was unclear, we had no difficulty setting the machine up thanks to its intuitive nature. was no need to make any major adjustments. Although, you will need to adjust the height by installing the foil roll to the side. Except for that, the machine was ready to be used. My primary use for this machine is debossing paper, cardstock, cardboard, as well as linen (bookcloth). It was perfect for my job to have the 150 heat setting. I was extremely pleased with how quickly and carefully the machine arrived. In addition to the tools, replacement parts, and foil samples, the tray included all kinds of foil samples. My first gold foiling roll was not delivered until recently, but I was able to foil with Heidi Swapp foil while waiting. it is more convenient and shiny when it is rolled up. The following is my experience That is at least what I do for my cardboard book covers The best results came with a bit of pressure, just enough to work! My experience, however, was that blind pressing first and foiling afterwards produced the most effective results with thicker material. This same company also produced a bronze cast for me. The great customer service of this company also enabled me to purchase a custom cast. The company encourages you to contact them by email with any questions you may have before you purchase the cast.
In short, I am a big fan of this machine because of the great features This product has a number of features that make it extremely easy to use, including its compact size and easy setup, as well as great customer service.

Stephanie Chapman

| Apr 07, 2021