Bob Smith Industries Insta-Cure Super Thin CA Refill 8oz
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The foam can't be used with this. If you want the gold version, you must have it.
For best control, use a medium or thick product. Thick would be better because it will be easier to work with. If you do not have an accelerator, you should place the glue on one side of the joint and the accelerator on the opposite side. I would not recommend doing
It won't seal but vibrations will cause it to crack and separate from the roof. The purpose of this product is not to make a watertight seal. If you want to use an epoxy, use a two part one.
In short, yes. Prior to using a surface, make sure it is clean.
Selected User Reviews For Bob Smith Industries Insta-Cure Super Thin CA Refill 8oz
The only CA glue that can be used like this is this (because it has to be extremely This type of glue has a high potential for being hazardous nonetheless and must be stored in a very secure manner. You and every object around you will be stuck together because it is literally uphill. Despite its reputation, this product will react violently with various organic materials such as paper, cotton, and wood. You need to be careful with this substance and get used to how it Pour it into the can and never let it run Make sure you use the capillary tube micro droppers that come with Bob smith -- Be sure I will not let you down.
I was concerned once I opened the bottle to decant into a smaller applicator, the rest of the glue would dry out. However, this hasn't been an issue up to now. The stiffness of this stuff is about the same as water, and it takes just a few seconds to cure. In spite of my impatience, I have never had to use any accelerants. Having parts fit together very well won't fill gaps at all, so be sure you don't have any gaps. I find this CA glue to be a good value, as long as you work fast and know what you are.
The stone and/or saw dust fill cracks and voids in wood with this product. I make custom wood signs and live edge furniture, and I use it to fill cracks and voids. Make sure you wear a mask (Full 3M) and eye protection if you plan to sand down this product, as it is highly Furthermore, it will release poisonous gas on sawdust, so it needs to be covered with a mask.
I use super glue because it is super strong. You will need to be careful, as it's as thin as water and can go anywhere. I've used it on some of my resin dragon eggs and burl dragon eggs. Any places where my wood is soft, I use this product, and it penetrates deeply enough to make it a solid piece.
Just don't blindly blow on them, because they are ridiculously thin and will scratch! My eyelashes have been affected by it (luckily) and numerous times I have glued my fingers to stuff with this glue. There is a VERY VERY thin layer there, so be careful! Yet it was able to do an excellent.
It is very common for me to use instant glue when making guitars. The adhesive properties of this glue are excellent, and the glue is very easy to use You notch up. Only drawback is that the Design allows too much glue to come out even after barely opening. In addition, you must dry or wipe off any residue on the cap before you attempt to close it, or else your fingers will catch on it when you twist it. The value of this product is good, despite that minor issue.
The best, always. The glue I use has been around Many times I buy the larger bottles and keep a lot of them on hand in all the viscosities I can find. The cyano glue I use comes from good Ole Bob Smith Industries even though I've used so many other cyano glue brands.
This product is awesome, as are all those manufactured by Bob Smith Industries! When I turn maple bowls for customers, I use this water thin Super glue to stabilize the spalted maple. When used as a finished product on custom pen turnings, it's a really nice hard finish that prevents wood from tearing out while turning on a lathe.