HyLoft 45-Inch by 15-Inch Steel Wall Shelf for Garage Storage, Low-Profile Brackets, Hammertone, 2-Pack, Premium - Wall Shelf.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The shelves were about 4 or 5 inches long (6 per shelf), so I guess they were 4 or 5 inches It is essentially the same thing as a lag bolt. The screws can be drilled directly into the stud if you have a screw gun with 12 volts or better along with the correct bit.
chance that it is going to happen. Despite the fact that the hangers don't slide like normal clothes rods do, they will still fit into the openings on the shelves. A version of this shelf with a rod attachment beneath it is also available For your help, I would like to extend my sincerest gratitude.
Though I haven't tried hanging shelves on metal studs myself, I have heard that the recommended way is to connect shelves with toggle bolts rather than lag bolts because lag bolts aren't confident in their grip on metal studs. Good luck! As well as being very effective (when mounted in wood studs), these shelves are also attractive.
You can select either of them, and it will work. If it were possible, 24 inches would be the best fit for load distribution between studs, but you can place your support brackets up to 30 inches apart on studs centered at 15 inches on center, but I think this would lessen the capacity of
Selected User Reviews For HyLoft 45-Inch by 15-Inch Steel Wall Shelf for Garage Storage, Low-Profile Brackets, Hammertone, 2-Pack, Premium - Wall Shelf.
In my laundry room, two of these shelves span both walls, and three of them have been purchased. even though I constantly called to order more braces to make sure that I would be able to support all the shelves under my desk, the company did not sell me any additional braces. No matter how tempted I was to call back and say that one of the sets of braces was missing and have them send them to me free of charge, as the company is not my customer, I could not bring myself to do something dishonest. An oriented person. In my opinion, if they were hung one above the other and I didn't need to cover the entire wall, it would have been a 4 or even a 5 Those who don't think about it will just give it a five-star rating.
It might be impossible to understand how I can give 5 stars for durability but only 1 star for the overall product. In short, the shelving is made in China by fitting all the pieces into a jig welding machine that holds every piece in place while welding. must then be cleaned, painted, etc. In this case, a jig is bent the shelves lengthwise. The problem is, once the shelves are bent, they cannot be straightened. My shelf in the front was almost two inches off its neighbor in Measurement of both shelves took place using my Stabila level. Suppose you are standing against a wall with one end of the shelf flat, the other end will buckle 1 inch to the outside. The front will do the same thing as well, with a diameter of 2 inches. Products made by Chinese companies have a problem because they are made in China. The same goes for Koreans and Taiwanese products. To make more money, it's okay for them to cut corners. There is a need for companies to have their own personnel in China to monitor production and As a result, I am very thankful to Amazon for taking responsibility and making the situation right.
I haven't been able to say enough good things about it for it has completely transformed my garage. I spent $160 to purchase shelves which provided 16 feet of storage space. I am satisfied with their performance as I am buying 32 additional feet for my garage. The aesthetics of their products are excellent, as are their durability. My garage has gained me friends and neighbors over the past couple of weeks because it is so clean! Two 16 ft. can be seen attached. A network of pipes has been There are a row of them.
Two days earlier, I had installed Fleximount shelves in the same room. I was convinced to use this shelving because of the size of it. This is a vastly different product from the one I had previously used. It would have been ideal for me to have been able to get 48" wide shelving if I could have gotten the Fleximount system. As far as price is concerned, there isn't a huge difference. Although there are many differing levels of service quality, this does not mean they are all equal. While it did not come in an aesthetically pleasing package like the HyLoft, the Fleximount did. The wounds of some people are tightly wound, while the wounds of others are less tightly wound. As part of the Fleximount, washers were included. HyLoft does not operate in this manner. The Fleximount bolts are better quality than the HyLoft bolts, even if they are not exceptionally good. The HyLoft product is one of the weaker ones in this group, in my opinion. You don't have to go through any complicated installation processes. As I see it, the problem mostly stemmed from the template I used. Without this, I would have been forced to spend a little more time making sure everything was secure. In my opinion, the main problem with these shelves is that they appear unstable. It is for this purpose that they provide the rubber stoppers. Stopper for shelf provides an element of safety - by keeping the shelf pushed forward, it will stay in place when it is pulled up, meaning it won't come out of the wall when removed. Due to this, it is not prevented from moving laterally, which is fair enough. Fleximount addresses this issue by introducing a slightly different interlock system, and by adding Velcro straps in the middle to secure By constructing the cable with interlocking hooks and loops, it eliminates the need for rubber stoppers, and velcro provides the necessary side-to-side motion for good fit. There is no guarantee how close the brackets will be together in each installation, so no perfect solution exists. However, I understand the dilemma they are in. As a nod to Fleximount, I zip tied the brackets and then attached the brackets to the base to keep them from shifting. Although the system appears to be working, I've included a picture here of both the rubber stop and the zip ties (I cut off the pieces when I turned the system on). As a rule of thumb, given the quality of things, the HyLoft will last about four feet, but it will Instead, if you have room for 4 feet and don't mind 12 inches deep, choose the Fleximount models.
Here are some pictures of me. These are my pictures, which you can view As a result of its strength and durability, I value the shelf. All others who claim that shelf falls right off the wall did not hook it up to the wall studs. It comes with strong bolts, but you have to mount it to studs. Hyloft's shelves support a weight capacity of 200 pounds each, the company claims. In my opinion, I only have one complaint - there weren't any safety features. One person You can see how straight my pictures are, they're like a laser beam.
When I installed the foundation wall studs in my basement, it couldn't have worked out better. I used (2) 1/4" x 1 1/4" hex head tapcon fasteners in each bracket, Depending on the type of hammer drill you have, you will need a rotary hammer drill or hammer drill to drill the holes into the concrete. Below is an example of how I used a Bosch HC2011 3/16" SDS-cut The hole cutters are compatible with a Dewalt D25313K rotary hammer drill. They drill through concrete like butter when used with the drill bit and the bit (both purchased on Amazon previously). A portion of the remodeling process required me to shorten one of the shelves, which I completed by simply using a hacksaw and five minutes of work.
Related Products For HyLoft 45-Inch by 15-Inch Steel Wall Shelf for Garage Storage, Low-Profile Brackets, Hammertone, 2-Pack, Premium - Wall Shelf.
