3M Full Facepiece Reusable Respirator 6900, Paint Vapors, Dust, Mold, Chemicals, Large
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
From 3M's website, it looks like particulate filters are often used for biological control with the 3M 2091 P100 Particulate Filter being a minimum. Several of the cartridge filters claim to be able to handle particulate matter and have a p100 rating, but I am still confirming this. Click on the link below regarding ebola and respiratory protection, or simply type in "Personal Protective Equipment (PPE) for Ebola virus disease (EVD)" and you A multimedia file. The 3M company. What is mediawebserver.com/mws? There are 66666UgxGCuNyVs658T_OxM6EVh6EVs6EVs6E666666-
I think it's overkill, but I can't help it. All of my turning is done outside, so I just wear a plastic shield, but this would be just as effective.
Selected User Reviews For 3M Full Facepiece Reusable Respirator 6900, Paint Vapors, Dust, Mold, Chemicals, Large
While Amazon and 3M responded to my concerns with quality information, I was unnerved by the lack of complete and helpful information. There is an important information missing from the product description. I. 1. USE OF THIS PRODUCT IS NOT SUITABLE FOR THOSE WHO ARE REQUIRED TO A SEPARATE SET OF FILTERS IS REQUIRED. I DO NOT INCLUDE FILTERS WITH THIS PRODUCT. I may have missed some feedback if I had taken the time to read it A special thank you to those who gave one, two, and three stars! Having learned this, I would have understood that this face mask will not seal properly when the wearer of glasses is wearing one. Furthermore, I would have learned that this respiration mask is not equipped with a respiration filter. I can see the logic of that - If the customer intends to work in an environment composed of hazards, the filters purchased should be designed to handle those hazards. The fact that there is no warning regarding the lack of filters (in bold and in caps) is not provided somewhere at the top of the product description is also inexplicable. As a whole, the mask seems to be of a The head straps of the mask have been described as the achilles heel by some reviewers. It would be a good idea for those straps to have a quick connector/disconnect option. If the mask is not equipped with a quick connect/disconnect feature, the straps may be overstretched when putting on or taking off the mask.
This page was last updated on As for the fit, I don't typically wear a medium in anything, but I went with a medium based on reviews and it fits perfectly. There is no way I would want it to be smaller, but it does not Despite being 6' tall with a big head (size 8 cap), I am fairly slim. It feels good to have the respirator cover my face in such a way that it feels secure without being annoying. When the half mask got sweaty, it was impossible for them to stay on my face. It is a very comfortable full face mask that stays in place. I waited too long to get it, but now I can tackle all those maintenance projects on our 110-year-old house without worrying about it falling off. In addition to the attached photos, I also used the two videos to review a Tyvek The following modifications have been made to this page as of 12/27/2020. Those who have reviewed more recent products here may be receiving non-US 3M faceplates. Looking at some of my older reviews, I noticed that some were getting 3M faceplates that weren't from the US. 2017 was the year that I bought it. A full faceplate for use by the National Institute for Occupational Safety and Health (NIOSH) has been approved in the United States. I still have no issues with the straps and they hold the faceplate securely in place almost four years later. It should be mentioned that you must purchase the filters separately since they are not included with this faceplate. In addition to the original photograph of my box, I've added photos of the NOISH statement. My personal experience has been that I purchased my item both from Amazon and had it shipped by them.
This is not an authentic 3M product for the US market.
The second one I did. My favorite thing about this mask is that its visor never fogged The kit can be used with any 3M filter, chemical, vapor, or just plain P100s. ** BE CAREFUL ** when changing filters there is a pink rubber ring gasket that you have to put under the filter at the There is a tendency for it to adhere to old filters and get thrown away with them. Unfortunately, mine was in the trash - fortunately I managed to retrieve it It took a lot of hard work to learn. You should purchase additional visor covers if you plan to paint with it. It's a great thin sheet of plastic that clings to the top of the visor and offers great visibility. Ten of these cards can be had for $15 per pack. There is no way to use a cling wrapper. The glass does not allow a good view If there are no covers available when you paint, it's okay to use in an emergency. Make sure to take good care of it so that it will last a long time.
There just aren't enough of them to go around. Using this mask has changed the way I remember the names of my kids every time I finish painting. It's true that I'm not getting dumber (at least on account of the fumes) since I'm using this when I paint. You can wear it all day long, and it has no fogging problems.
After several asthma attacks and a bout with pneumonia, this respirator has enabled me to return to work. Previously I used 3M throw away dust masks to remove dust and have since switched to using cyclones. Although there is no breathability and the arms pressed into my side, the fit is good even over a short beard. I rigged a wire harness to hold my glasses, as wearing them allowed air leakage.
Despite the fact that it's a face mask, it's still great. My work place is a noisy, dusty place where people grind metal and sand foam and carbon fiber all day. Face masks are most certainly the best way to mask all-day odors, and this mask does not even have a smell. Even after hours of use, I find that my head is not bothered in the least. The elastic strap system allows for easy adjustments. Furthermore, I've used it for lathe work, where I sanded with 2000 grit and was surprised at how pleasant it was not to be inhaling any dust and especially not getting any dust in my eyes! The only problem I've noticed is that when I use this for extended periods of time, I can feel my neck getting sore from the extra weight and maybe the.
During all types of weather (started when it was nice out, finished in 3ft of snow), it was comfortable enough to last a few long evenings. While I was expecting the mower to be good for mowing the lawn and doing fall cleanup at home, I wasn't prepared for how wonderful it was. My allergies have been bad (getting on immunotherapy finally) and I was able to mow the lawn while wearing this without being out of commission for the rest of the season. After 9 hours. Neighborhood laughed (before It might be COVID), but who cares when you can get stuff done and feel great afterwards. As I cut and sand the wood, I will not even be able to smell it. With a good filter I can resume my woodworking hobby.
Related Products For 3M Full Facepiece Reusable Respirator 6900, Paint Vapors, Dust, Mold, Chemicals, Large
