Dimensions 3mm(1. 158"),Length 10 ft Material PTFE(commonly known as Teflon),Transparent
A temperature range (Degree F) of -454 to 500 degrees Fahrenheit. A UL-224 VW-1 (UL-recognized) flame rating is acceptable. There are two dwellings per hectare. Item 15.2. This is equal to 20 grams per cubic centimeter.
It is capable of withstanding acids, alkalis, and all kinds of organic solvents and is ASTM D543 certified. It has a high lubricating capacity and is nonstick
According to FDA 21 CFR 177, raw materials are compliant with FDA requirements. Surfaces that come in contact with food should use 1550
It has excellent electric properties and a long service life. Widely used in chemical processing, electronic, medical, and industrial industries
Questions & Answers
If I am using flashforge Creator Pro what is the best size to choose?
Generally, the inner diameter of a dry box should be 2 mm in order to fit the outer diameter of The filament is 75 mm in diameter. You will need something wider, 8 mm outer diameter looks like it is the one I have. If you want to replace the guide tubes that came with the printer, you will need something wider.
Can you tell me what the replacement blades will cost? Are there more items that can be ordered ?
There is no separate sale of blades for tube cutter, we only sell tube cutter
Selected User Reviews For PTFE Teflon tubing 10ft - 3mm ID X 4mm OD - Allen Tech PTFE Teflon Tube
High temperature resistance is a feature of this product
| Jan 18, 2021
This product works great! I use it to dry my filaments
Product works great for my filament drybox! It takes one filament at a time. There are no problems with this line, which is 75mm wide. From my drybox to my 10 line manifold, I run this pipe and it is bendable enough to make the transition, but very strong at the same time!.
| Nov 15, 2020
Has a tendency to bend instead of cutting Tubing is the subject of reviews
Has a tendency to bend instead of cutting The nozzle had to line up with the blade of my printer for this to work. There is now a chance that the nozzle could become stuck. Compared to what it does, the price is outrageous. We bought it because of the high rating it received. after reading a little more into the reviews, most of them are for tubing, not the cutter itself. Essentially a scam.
| Feb 02, 2021
The hotend is designed to fit Prusa IS MK3 printers
The hot end tubing on my Prusa IS MK3 needed to be replaced, so I purchased this. One way to test is to run a filament through it and observe if the filament.
| Mar 10, 2021
Precision and sharpness are key characteristics of this It's amazing how well this tube cutter works
Whenever I work on the 1/4" tubing on my RO filter, I have it handy. I have always used a utility knife to cut the tubing in the past. It will never be the same Using this cutter will result in a perfectly square, clean cut every time, and it is free-handling In my opinion, standing is important As a result, the cutter stays safely closed whenever it is not in use, which is a good thing since I would recommend getting this filter if you're planning on installing an RO filter. Your decision will not be regrettable.
| Oct 13, 2020
It has a larger outside diameter than specified
The product, the shipping speed, and the OD of the tube are all excellent, but the OD varies between 6 and 7. The thickness of the sphere was three millimeters. The 6 mm tube does not fit in a standard fitting made for 6 mm tubes, which was what I needed for my project. In my case, I would have preferred to have it slightly under instead of over. You may need just a tube, in which case this is an excellent.
| Jul 23, 2020
My experience is that it works quite well
This filament has a tube which they describe as having an ID of 3mm and a diameter of 75mm). This tub was smaller than the outer diameter of my 3D printer, so I just cut off the old filament tube guide by about 2 inches, nestled the tub inside of it, and then used heat shrink tubing to make it look like it was nestled inside the old tube guide The bond between the parties is permanent. This works just.
| Oct 23, 2020
This is the perfect accessory for the EZR extruder
In the past, I purchased PTFE from another vendor (perhaps Siquk? While it fits standard extruder fittings, it has a big enough OD to be too big for the SeeMeCNC EZR extruder I now have. There is a difference between four and four and a half millimeters in the caliper. A 15mm tube. It just so happens to be the diameter of Capricorn tubing as well. An EZR can't handle this size. The PTFE I received today from Allen Tech was in good condition. This fitting is exactly 4mm long and works perfectly with the EZR Extruder. After all, I wasn't certain I would find a reliable source, but it looks like I won't have a problem in the end.
| Jan 31, 2021