* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders

1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders

1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders
$ 15.99

Score By Feature

Based on 442 ratings
Value for money
8.08
Durability
7.56
Longevity
7.51

OveReview Final Score

How Our Score Is Calculated

Product Description

The Harbor Freight 1X30 Belt Sander can be used in conjunction with the 1X30 Super Strop Leather Honing Stropping Belt to sharpen clothes. This Leather Strop can not only be used as the final stage of sharpening, but it can also be used to maintain an edge between sharpenings.
A premium buffing compound that's made in the USA as well as brief instructions are In order to properly trim or polish the knife blade edge, it is essential to apply the White Buffing Compound. The White Buffing Compound will help to remove very small fragments of the Burr or Wire Edge from the knife. It is possible to extend the life of the edge by removing these fragments.
As a result, the Super Strop leather Honing Belts come a little short and may need to be stretched to fit. Our belts are available in a variety of sizes, so if you think yours is too small, contact us immediately! Our goal is to provide outstanding customer service & support to all customers!!
A Harbor Freight 1x30 inch belt sander gives you professional sharpening results at a fraction of the cost. This popular belt sander bags are made from premium quality leather and fit most 1x30 belt sanders, including Harbor Freight, Wen, Rikon, and nearly every other brand. All Harbor Freight 1X30 Combination Sanders are capable of finishing a job.
A LIMITED LIABILITY WARRANTY APPLIES TO SUPER STROP LEATHER HONING BELT GUARANTEE | SUPER STROP Premium Leather Honing Belts are guaranteed against manufacturer defects, material defects, and user error. We'll immediately replace the Belt or refund your entire purchase fee if your Leather Honing Belt overstretches, fails to track straight, breaks or you cut the Belt as a result of an accident or improper usage. Since leather is a natural product, it can be unpredictable to work with, so we guarantee our honing belts to be free of any defect you can imagine.

Questions & Answers

The tube of the compound appears to be closed, but how do you remove the compound from it? Would you please accept my thanks?

Thanks for your question, *br>I'm glad you asked. A few twists and the metal bottom will come off, allowing the compound to If the cardboard tube is not visible at the end, you can trim it carefully or peel it off. Thank you for your time. If you have any further questions, please do not hesitate to contact us. I thank you for your support, Pro

How do you tighten a belt slack? Are you spotting the platen or the belt slack?

Stripping should be done with a slack belt. This will help you manage the proper pressure for stropping and let the belt sweep across the edge to remove the burr without damaging We would love to answer any questions you have! Please do not hesitate to contact us if you have any other Please accept my sincere thanks We are a sharpening supply company

What direction should the sharp edges be run in? Do you run them with the belt or against it?

Thank you for asking. I appreciate your attention. Whenever you run Edge Trailing, it is your first choice. I hope this helps--the sharp edge will be pointing directly in the direction of the belt. If you run it into a moving belt, it would cut it. We are a sharpening supply company

When the strop is not in use, does it need to be cleaned?

Thanks for your question, *br>I'm glad you asked. Each time you use the belt, the belt does not need to be cleaned. As the belt strops, you want to build up a thin layer of compound on it. This will help it strop more effectively, and will also help it take up compound more effectively. The compound layer on the belt will crack as it runs, which is an indication that it's time to clean the belt. To clean a belt, use 400 grit or higher sandpaper and lightly hold it against the belt while it runs until the compound layer appears smooth. Compound builds up over time. It is not necessary to remove the entire We are here to answer any further questions. Feel free to contact us if you need additional help! We are a sharpening supply company

Selected User Reviews For 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders

I am very happy with the product support
5/5

As I am yet to use the belt, I cannot speak to its quality or durability. The product arrived quickly, however. To add to the comfort of using, I set up a tray of water to cool the plane blades as I sharpened them on a belt sander next to the water. In an accident, I accidentally soaked about 3 inches of leather belt in water when handling it. It caused the belt in that area to shrink and distort. I called Pro Sharpening to see if Jesse knew of any way to fix it. In exchange for the belt, he offered to send it to me free of Wouldn't it have been fantastic if that had happened? The package has just been received a few days after I sent it. Jesse, thank you for your help.

Maggie Fry
Maggie Fry
| Feb 16, 2021
It's so easy! Sharp, scary, and easy! In the few years since I bought my benchmade folder (m90 steel), I have not had to sharpen it, however I have stropped it manually a few times
5/5

With the help of my cheapo 1x30, I bought this leather belt to 'power strop. In terms of restoring the edge, stripping alone didn't do it. As a precaution, I put on a 600 grit belt, rubbed it around a couple times, and then used holy moly and white compound to sand the leather belt. The razor will be as sharp as a razor in a few minutes. I was impressed with the quality of the belt I'm trying to see how it's joined at a seam, but I can't quite figure it out. I highly recommend this product!.

Peyton Stein
Peyton Stein
| Jun 16, 2021
It's all good! There seems to be no problem with the belts
4/5

I'm not sure if that is a good or a bad thing because they are not as smooth on the inside that meets the wheels of the sander as those I've used in the past. They are doing a good job so far. I am looking forward to seeing how long it takes for them to stretch out. Furthermore, the abrasive that is included with the belts is garbage! A rock as hard as stone! A charge will shatter the belt and break it to pieces when you try. If you order, you should buy a different abrasive!.

Leia Sanders
Leia Sanders
| Aug 09, 2020
A fast and reasonably priced (Harbor Freight) 1" x 30" belt sander does the job well
5/5

The first belt I use to sharpen a knife is 1000grit, followed by a belt of 2000grit, and I finish the process with a cloth The Super Stroup is the one I use when the knife just needs an extra touch up. My knife has a very sharp edge thanks to this method, I have used it a lot and it does stretch a bit over time, but I do not find a faster, easier or faster way to sharpen.

Ayan Barnes
Ayan Barnes
| Aug 24, 2020
Knives can be finely polished by using this product
5/5

To finish knives sharpened on a harbor freight 1x30 belt sander, this tool works great. Take a look at online videos to find out how it's done and be careful. A fast, easy, and effective method for getting the sharpest edge.

Tiana Kline
Tiana Kline
| Dec 31, 2020
Those streches come on so fast! The first time I used it, the fabric was too stretched for any good
3/5

A Harbor Freight 1 x 30 sander was used to use this tool. Another brand would be better.

Makayla Ruiz
Makayla Ruiz
| Dec 28, 2020
Stropping long blades is a great use of this tool
4/5

I used it on my HF belt sander and it fit very snugly. I highly recommend it as an addition to your blade sharpening tools. It can be used to buff long blades such as katanas, swords, large knives, etc. The guarantee is very good as well.

Trace Lane
Trace Lane
| Jul 21, 2020
I really like this product
5/5

I am very pleased with these belts. They are made well and are a good fit for my Harbor Freight sander. I love how they run perfectly with no wobble and make my knives razor It's great to have such a good product. Thanks. My future will definitely be filled with more!.

Miley Braun
Miley Braun
| Apr 27, 2021

Related Products For 1x30 inch Leather Honing Strop Belt Super Strop with White Buffing Compound fits 1x30 Powered Belt Sanders