NEIKO 20753A Keyless Chuck Conversion Tool | 1/4-Inch Shank,Clear, Original version
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This will hold even the smallest drill bits, according to me. I have a 76 drill bit in it, which I think is the smallest one I possess.
ALUMINUM DIMENSION AS A WHOLE. If you place it in a drill, it'll be 21/4'' long by 1'' wide. This addition chuck is good for those projects in tight spaces, depending on how much space you have available.
In my opinion, 3/8" is the largest bit that could fit in this chuck. That still puts some pressure on its As long as you are drilling CHEEZE or very soft material, you will be able to use a bit larger than 3/8" with it. The best thing to do when using these chucks is to not use long drill bits and not to push hard on them. You don't have to be abusive with them to get the best results, but they are not "heavy duty". The simple design is well suited for hobbyists, tradesmen, and handymen to handle light to medium duty duties. Their hardness is higher than unhardened steel, however not high as a good drill chuck, so the price cannot allow for that quality, however they do function quite well if you need small size, portability, flexibility and speed and you don't expect perfection. As good as any other pen I have used, the Nieko is also excellent.
It's not an expensive chuck, so the majority of it is made of metal. However, Makitas can be stopped by a brake. If you wish to stop your drill without getting stuck, just ease off of it slowly instead of coming to a sudden halt.
Selected User Reviews For NEIKO 20753A Keyless Chuck Conversion Tool | 1/4-Inch Shank,Clear, Original version
When handling this chuck, it is imperative to not open it too much or else it will fall apart. = 4th image. For maximum tightening, there is no flat side on the shaft of the threaded piece to use a wrench on, so either you will need vise grips or you will need to use a vise as hand tightening will soon loosen You can't read it on the web - it is small and dumbed down Although it drills fairly accurately, it is not completely precise It is completely unrealistic to expect quality and precision at this price.
This is much smaller than my DeWalt chuck, which does stop when opening / closing tightly, without falling apart.
I have used it without issue for several years. In any event, the DeWalt saves you about twice the cost, but it is well.
Since I bought mine about two weeks ago, I haven't used it much. This has been going on for five years now. A review is now in order since it broke over the weekend. I bought this item so that I could attach drill bits to a 1/4" flex drill extender that was flexible so that I could work in tight spaces. The claw tip of one claw ended up breaking off, so it ultimately failed. The pros are In terms of compactness, it's pretty much the best one could hope for. *Lasted 2 hours and 35 minutes. It can last up to five years if it is frequently used. * Worked reasonably well for me. The cons are It is impossible to use the body as leverage against the chuck because there is no solid grip. A loose bit can cause the material to bind during drilling, which could result in bits breaking off. The design works by using a spring mechanism that forces the claws apart, which, in turn, are forced into alignment when the chuck rotates. As a result, should a claw become stuck to the bit, cranking the chuck will not provide any pressure to release the claw. There is a great deal of roughness in the threading of the chuck. The issue has nothing to do with functionality, but it is very Small bits break easily when there is mild eccentricity. This limits precision work and makes it more likely to break. For routine work, however, it is not normally an issue.
This is a product I have ordered several times in the past and highly recommend I liked how well they worked. Despite this, the product I just received does not even resemble the one shown It is useless due to the groove in the shaft being in the wrong place, so it does not lock into my Hitachi electric screwdriver (it falls out constantly). It seems reasonable to me that I would get a Neiko chuck if I order one.
Despite that, it's not a cause for concern The purpose of this chuck was to fit into the end of an extension so I could use smooth-bore drill bits These drill bits have shanks. It never crossed my mind that there would be so much data in there. Therefore, it works very well for what it is intended for. Whenever you tighten this chuck, make sure it is connected to your drill first, because otherwise you won't be able to get enough torque.
In addition to what I needed, I found Easypower isomax (79675) at my local hardware store. I bought two but they both wobbled so much I was unable to use them, so I returned them both to the There was another one on the shelf so they tested it out, same problem, Owner said, "Wow. ". It was so much for "industrial quality". I got a refund. After that, I went - This is what I hate to do (I can't stand it). Found the Neiko brand, which I thought sounded okay so I took a chance, and I got them within three business All 3 worked nicely, and they were made to look like they were going to be used by The price is well worth it. After buying one from another online site for $9, I bought another one from another site. I think it's about 99. A bigger screw was inserted in the Temo in the same way as on my old ones. I say just buy this one, if you really need one that works. So save time and money by getting it now. Time is money, and you can't make any money by not working. My name is George, and I'm.
It is not possible to correct. It is of little use. There are some small bits I can't use in my normal drill because its chuck won't grip them. I used a 1 inch drill bit to bore holes with the chuck for my first use. This bit has a diameter of about 3/64" (about 2 mm). "The bit wobbled" about a tenth of an inch out of center Even though it was centered correctly in the collets for the chuck, it still fell 15% of the way out. It seems that, once the chuck is loosened to remove the bit, the collets tend to "stick" in the closed position. When I remove my bits, I have to tap the collets to get them to open. This chuck can only grip a 50/50 diameter bit, but I am not familiar with chucks that are capable of holding tiny bits.
As soon as it was used, it fell apart. I found the PCs. I. & I. Despite putting it back together five times, it fell apart again, and a few PCs were lost in the process. After I finished the job, I was able to move forward. If you are in need of a quality tool, don't buy it. While bits fall apart when removed, if you're super careful, you might be able to get it to work. A D- has been given to me We paid more than we expected, but it was a.
own a cordless impact driver, but I use corded drills for everything else. As a result, if I want to drill holes with an impact driver (I know, not a best practice), this is a great inexpensive way to enhance the capabilities of that There was one occasion when I got a little too aggressive drilling into a wall stud, and the impact function went off As a result of finishing, the drill bit was stuck very tightly in the chuck (although it was The entire thing had to be disassembled in order to remove it, but it's easy to put back together now and still works fine. This is my first time buying it, and I'm happy I did.
Related Products For NEIKO 20753A Keyless Chuck Conversion Tool | 1/4-Inch Shank,Clear, Original version
