* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside.

Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside.

Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside. Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside.
$ 19.99

Score By Feature

Based on 3,772 ratings
Suction power
9.70
Quality of material
9.48
Value for money
9.53
Durability
9.33
Easy to use
9.28
Sturdiness
9.18

OveReview Final Score

How Our Score Is Calculated

Product Description

This product has a high hardness performance22 precise screwdriver bits. All alloy S2 steel, HRC
The 2-year warranty reflects the fact that we use solid materials and solid engineering, so our tools will last for years, not those from elsewhere that are easily broken
The multi-function two-piece mini screwdriver tool kit can be used to repair electronics, laptops, phones, computers, watches, eyeglasses, smartphones, toys, Macbooks, game consoles,
Design Patented screwdriver with built-in extension shaft and bits with a hex shank size of 4mm and a diameter of 45mm.

Questions & Answers

As a computer technician, I'm well versed in the field. It has happened to me that many tools wear out after a few days of work, causing screws to strip. What is the durability of these?

I said he didn't think they are made of "Tool steel" so I didn't imply they aren't metal. That doesn't mean they aren't metal. *br>Each type of steel used by tool makers differs from each other *br> *br>For example, a D2 tool steel has an air-cooled temper, whereas an O2 is generally a non-petroleum alloy. The hardening tool steel is a high carbon, high carbon steel with extremely high wear resistance. As a knife blade steel, it is used for long productions, cold work applications, high wear applications, and it is also very popular for cold-work applications. Oil-proof, O1 Tool Steel can be used in a number of applications. Hardening tool and die steel *br>O2 tool steel is an oil hardening tool steel that is used for die making. It is normally supplied as annealed condition and has the characteristic of being durable. The 02 steel is a good quality generalpurpose tool steel that is often used in applications where the expense of a high carbon high chromium tool steel is not The Airbus A2 is an aircraft of the highest quality. The medium-level of hardening An alloy made of cold-rolled steel Usually containing molybdenum and chromium, work tool steels belong to the group A series of steels. It is important to note that tool steels made of A2 have a high carbon content. Deep hardening is a method that can be used to minimize distortion in tool steels A2. A tool steel's characteristics are determined by the kind of tool it is used for. Different grades of tool steel have different characteristics.

Do the pieces have magnetic properties?

There is no doubt that they are There is just the right amount of magnetism in them The character is not overly strong, but neither is it May 2016 was the date when I purchased mine.

Would these bits be compatible with a normal 4mm bit if there was an adapter? It spins just by virtue of its six grooves. ?

Hello, that's an excellent suggestion. I will tell our engineering team. We might have an adapter for a 4mm driver in the near future.

Is the end of the hex a certain size? It is a standard 1/4 inch or is it something else?

In the description, it is stated that all bits have a 1/4 inch hex driver end, but that is incorrect. You will also find two hex bits in tip sizes 2 and 3. There are two millimeters and one millimeter. Five millimeters

Selected User Reviews For Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside.

A machined part that was incorrectly made
3/5

The material and construction of the set appear to be of decent quality. It was the T4 bit that I needed to repair my I think it is one of the tiniest bits available (they offer only one size of torx). As a result of the poor machine work, it did not fit into my cellphone's screws. As you can see from the tip of the bit, it does not have an incredibly accurate shape. There does not seem to be enough depth in the valleys between the peaks.

Karla Alvarado
Karla Alvarado
| Oct 26, 2020
The Hardened Steel Bits in this superior quality precision set make it tougher than any other set
5/5

Taking off a pocket clip from one of my knives was not a simple task Dismantle another knife so that it can be cleaned and polished The restoration process. The number of counts) & As he was out of town, I went to Ace Hardware to buy a screwdriver set with the correct sized bits to get the job done. Those were the first two mistakes I made. The material it was made of was so weak that it could only be pressed into sheets and was so brittle that its predecessors were made from it The material is commonly used for wrapping food. Following my feeding of that set to the "helpful hardware guy" who recommended it to me, I went to my usual place to buy something similar If ADHD mode is enabled) & The fact that it stated the bits were hardened steel caused me to buy I made mistake number two there. As I attempted to unscrew the tiny T-nuts, they jammed into each other In the first two twists of screwing in six screws, the bit crumbled in such a way that I actually laughed out loud. When I find myself in these situations I typically lose the plot (expletive), but being fatigued and drained of my energy doesn't help. It was quite funny that TWO SETS IN A ROW could not loosen this tiny screw when I was running on pilot mode Failure to do the one task it was built to do, as well as failing to accomplish the one goal it was created for An attempt at repairing the damage was unsuccessful! The third mistake would be worse than any other I was surprised to read descriptions and reviews of many "precision screwdriver sets" I wouldn't have to borrow money to afford and even find reviews for some of them I could purchase myself I found everything I was looking for in this one (This set actually explained how to harden steel! I) & II There was a rotating top (something I bought since the first two did not have It arrived a couple of days after I ordered it (gotta love Prime!) I was blown away with this package from the moment I opened it. A nice case was included that kept it standing up and protected it You can quickly find the bit you need since the bits are displayed in an easy-to-read manner. There are no plastic parts in the "driver", it's made of metal and has a solid construction The rotating cap when you use it speeds up every job & speeds up your work flow immensely Even better, the bits are STILL as durable as they were prior to the upgrade Even after completing the two knife jobs I had, four additional similar jobs on folding knives, and numerous other little jobs, the knives remain as perfect as they were before using them A pair of door handles was replaced You can actually extend the handle of the driver to increase its length and let it release when you are done using it And if you don't think that's enough, it has an extension bit, Featuring an easy-to-use precision screwdriver set that will easily last a lifetime, this is of very high quality and should last as long as you do. As long as it is made in China, you won't have to worry about its quality. Having been so impressed with the quality of this set, I researched the company & now own two of their products. The tool making company that created the product is a highly respected, quality tool making company that prides itself on being a leader in the industry. This is a high-quality product A very good price for a very good set of end-of-year products. I will definitely buy their products in the future. When I need to get a tool in the future, I'll likely LOOK for their products!.

Bodie Howell
Bodie Howell
| Nov 24, 2020
Nanch quality is usually high, but there are some things I find disappointing in this set
4/5

This set is typically high in quality, so I'll just mention those things. To begin with, the driver extension is missing a midbranch as you can see from the attached image There is no mid-length lockout groove on this extension, so it can only be extended or retracted fully, as opposed to the product images which depict an extension with a mid-length lockout groove The groove should be as long as possible. While not a deal breaker, this has been an unpleasant experience compared to my previous Nanch experiences. Additionally, splined tool bits need a driver handle which is not compatible with other As stated in the description, the intention is to improve upon the slight slop in the hex interface, but in reality, the improvement is barely noticeable and the effect is not worth the loss of compatibility with my other drivers. I can't understand. Now that length lockout grooves are available, you can choose the length of the extension rod however you like it can be stopped in any position the rod is placed at" and while I can appreciate this concept, the execution seems inadequate. In my original review, I did indeed test the driver with varying lengths of stick extension as well as applying pressure to the rotating cap of the handle a small amount. I found that even the slightest amount of pressure results in slipping of the extension. This rotating cap has been designed to allow pressure to be applied to the driver while rotating at the same time, however, the pressure applied defeats Nanch's belief in infinitely adjustable designs. It is not practical in practice and would have been better left as it is or with deeper grooves where necessary. Although the extension can be locked at any length, there is still a groove to lock the extension at the maximum length, which seems odd if the design were robust enough to support it. I am not convinced that removing the groove is a good thing. It is certainly possible that my driver handle is an aberration and that the design is sound, but without a sample to draw upon, I cannot draw any conclusions.

Madalyn Yoder
Madalyn Yoder
| Mar 18, 2021
My favorite thing about this Nanch precision screwdriver set is its quality
5/5

It is imperative that the screws fit the bits snugly in order to prevent rounding The extended tips are very useful when it comes to reaching into components or recessed screws which are not accessible with any of the other precision bit kits. It is so helpful that the magnetic tips help with the installation and removal of tiny screws, as you don't have to fish it out of the carpet for hours to find it. In addition to the $200 51-piece master precision screwdriver set, I always reach for the Nanch because my Wiha's aren't magnetized and I find the Nanch handle feels so good in my hand. Even though most people may not mind this, it bothers me to see things like that on such an expensive tool like that. The price is so steep that they should have perfect finishes. I mean, this net is not even 1/4 the price and it's more fishy too. *If you are in the market for a precision screwdriver set, then get these. You.

Roman Haas
Roman Haas
| May 14, 2021

Related Products For Precision Screwdriver Set for Electronics,Nanch All-in-One Multifuction Repair Tool Kit Includes 22 Long S2 bits and One Aluminum Driver with Extension Shaft Inside.