Klein Tools 3005CR Wire Crimper Tool, Ratcheting Insulated Terminal Crimper for 10 to 22 AWG Wire
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As the jaws of this crimper differ from molex types, I have provided a photo. Designed to crimp insulated barrel type connectors, this crimper cuts a hole through the barrel. Molex connectors have a notch on the jaw and create crimping points on bare conductors and on the insulation of the wire. Further, the diameter of the molex connector is smaller, so you won't obtain enough crimp pressure to guarantee good connections.
There are crimpers rated for 10 AWG wires, so they will definitely work with that wire size. However, most battery cables in automotive units are MUCH greater than 10 AWG, more like 6 AWG - so you may need to use a longer cable. The size of the wire would be 2awg, so these would NOT work. The following is the 10AWG report An example of 22awg is a high capacity cable.
There is no way for me to answer that we don't have other tools
The question of whether dies were needed was not asked. The answer he gave me was the same as mine Can this tool be used with the Klein VDV series tool and dies available.
Selected User Reviews For Klein Tools 3005CR Wire Crimper Tool, Ratcheting Insulated Terminal Crimper for 10 to 22 AWG Wire
I have now reached the bottom of their barrel with them. We made this tool in As long as you are not bothered by that, then I guess you should purchase I do however find it bothersome. My preference is for things to be produced here, and companies need to keep their jobs in the U. S.
In my opinion, the tool is well-made, durable, and of good quality however, the red wire (22AWG to 16AWG) seems a bit too large for the tool. When I crimped with good 22AWG stranded wire and TE connectivity quick disconnects, there wasn't enough crimping pressure on the wire. Plugging the wire into the connector causes it to slide out. HomeDepot and Ace also immediately disconnect when you do a quick disconnect. HD tool comes with the connectors, which is a bit cheaper but does the job better. The Klein tool doesn't seem to do a good job with the blue connectors or the ticker wire, but it has a handy feature for the 22AWG wire. 20AWG is also likely to suffer from similar problems.
I will adjust my review if my experience ends up being different than my initial impression. This is the first time I have ever used ratcheting crimpers. It had occurred to me that as you squeeze the handles, the pressure would vary a little more. That is also incorrect, if you assume it as well. Each squeeze only lasts for a second. You squeeze the crimp tool further and it clicks as you go. It is not possible to release a tool by letting go. If you do not press the release lever or crimp more, the device stays in that position. In this case, I guess ratcheting means that in order to accomplish the same task, less force needs to be applied. This method is also easy, and it seems to work well, as I discovered by using an extra wire and terminal. In addition, as indicated by the headline, I also tested it on some spark plug wires and terminals Rather than crimping them, it more than twisted The only thing I had to do was squeeze about halfway to get them as tight as they should I nearly broke in two when I saw the way down. Hopefully, they will be used quite a bit in the years to come. My hope is that most of them will last for many years to come- I'm spending $25 on wire crimpers, what else do I need? The reason you are considering these tools is that you have bought cheap tools too many times in the past, and you There is only one thing I can say definitively, that they SEEM to be quality tools.
My days at the telephone company give me a familiarity with the Klein name. My hand tools were retired along with me, but they are still in good working order after 35 years. In order to distribute products to the Bell System, this crimper does not satisfy the same criteria as they would have if they came from Western Electric. There were no significant differences in the failure rates among crimping several different styles of connectors. The wire did not begin to firmly grasp a full crimp with an 18awg wire. An example of a heat shrink connector failure was because the heat shrink adhesive failed to hold the wire in place, and the material that was used for the heat shrink was damaged, so it could not withstand the crush of a I am not certain this tool would be suitable for anything except uninsulated terminals and perhaps larger wires.
It is a double jaw crimp. It has a sturdy construction, is reasonably designed. Two times are crimped on each end. A steel fitting becomes harder to set as a result of this. In construction, it would be difficult to achieve the leverage to put a steele fitting in place all day long. When you have a copper stain that is softer than e. g. copper pipe, you could use it for crimping a few wires at a time You might be able to manage it by cons. There is a lot of hand strength required.
This Klein Tools 3005CR Wire Crimper is so affordable that I am so glad to have purchased it. The only thing that I am a bit disappointed in is the fact that you can remove the dies from the jaws, but, they do not offer other dies. While other tools have crimping tools with interchangeable dies, Klein Tools has a crimping tool with interchangeable dies for other jobs. Normally, if I had not been in such a hurry, I would have selected another version of this, in order to use just one (1) tool for many tasks. I am still happy to have a quality product from a leading industry name like Klein Tools that is easy to use and well constructed.
This was an easy tool to use to crimp, it took me a bit of time to get it set up for the terminals I was crimping, but it was easy. One downside to this design is the trigger is very hard to get to since you need something much smaller than your finger to push it. In general, I really enjoy these crimp tools and they are letting my old hands try.