Trans Globe Lighting 40582 BC Traditional One Flushmount Lantern Outdoor-Post-Lights, 5-Inch, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It takes any household light bulb, but I'm not entirely sure what a 19 light bulb is. Saving energy was my goal when I installed an LED bulb.
The glass is all around it, so I don't think so, if it's behind a glass
The ones supplied to me were fine!
Selected User Reviews For Trans Globe Lighting 40582 BC Traditional One Flushmount Lantern Outdoor-Post-Lights, 5-Inch, Black
In 2017, we purchased this fixture from the local hardware store and had it installed by an electrician. It's not for technical reasons. I'm just frustrated and have arrived here to review it again. There are two stars in my book. Despite being beautiful on one hand, there isn't anything to say about it It's even more important if you've got an old-fashioned typewriter The owner of this house would like to have a rustic feel to it. It does not have a wrought iron fence but has frosted glass It is very impressive how the skeleton structure is made of iron. In the case of an A21 sized LED bulb, it does not close completely it barely closes around an A19 sized LED bulb if I press the fixture in on it (the socket has some play in its wire connections to the mount, so I hope I am not damaging For the best results, it works best with an old fashioned incandescent bulb or a small halogen This is the size of the There are limitations to them, but they are not the largest irritation for me. Your satisfaction with the fixture is guaranteed You can avoid changing light bulbs as long as you never have to. have no idea how this model made it through the product testing process. It is not unusual for me to curse the engineers once or twice a week when I change a bulb. If they put them in some karmic hell and make them change bulbs all day, it would be fine by me. Unlike some fixtures I have had in my house for a long time, where the screws that attach the glass cover to the mount are "connected" to the cover (i. e. As for the two tiny screws, you loosen and tighten them to adjust their position, but they cannot "fall out" completely), this ingenious design has two tiny loose screws you should have to tighten somehow in order to secure the cover to the ceiling As you are trying to figure out what to do, imagine tiny 8mm screws, matte black in color to match the matte black of the fixture metal (this will add to the fun of seeing It will take the following handyman to easily change the lightbulb in this This is a six-part series The tallest person in this building is two feet high The year is The man is old (so that he can stand on a step stool to reach the ceiling), but with tiny fingers to grasp the small screws, and has the perfection of a watchmaker, as well as the unbreakable patience of a Zen master. In addition to having three functioning arms, he will need to The first one is to hold the cover against the ceiling mount, the second is to place the microscopic screw into the tiny hole in the mount, and the third is to rotate the Phillips screwdriver to the right. Even if it were a dull black metal, it would blend together if you could somehow align it straight Don't forget to fasten the strap. Your circus act is made even more interesting by the small pitch of screw threads that make you feel like you're standing on your head First seventeen attempts resulted in the threading of the thing. IF you know such a person, and he or she makes house calls, please do give me their contact information for the next time I need a bulb changed. Take a moment to admire your beautiful fixture, while you wait!.
Turning the bulb so it faces you appears much better than looking at a shadow. Please let me know if you understand!.
I love how easy it is to install Light. Because I couldn't afford the black one, I bought a fake rusty one and took it apart, taped everything I didn't want painted and then applied two coats of black spray paint on top. After it has been curing for several days, it is hung My paint job looks even better than a factory-painted one, and it will probably last longer than a factory-painted one. Definitely the place to go if you are poor or on a budget!.
The quality is very good and the prices are reasonable! It was rust color that I ordered. Initially, I was a little unsure of what it was going to look like since the photos appeared to be mixed up. However, I am very pleased with the quality of this outdoor light for the low price! Installation is very easy. It is nice to see the glass & listen to the music A thick substance. This is not junk food. It only takes two screws to remove for you to open the space up and replace the Happy to hear that!.
This is a good buy for the price but it is not meant for mounting high up unless you have steel nerves. As luck would have it, I do have that. There are two small screws in the cover, and if you're on a ladder, you'll need to climb up at least ten feet When putting this bulb cover on from 12 feet, it can be a little It's a good deal, but I think the manufacturer should change the mounting screws to something like a thumb screw or mounting lock.
My hallway contains this outdoor light. It was originally meant for the outside, but I used it indoors. Besides the living room/dining room area and the hallway, the rooms with crown molding have all been built with hardwood flooring. The dining room has wainscoting, and it was important to me to choose a hallway ceiling fixture that would complement the casualness of the wainscoting and also complement the formality of the crown molding without competing with the dining room The exact thing I was looking for. There is no problem putting an outdoor light fixture inside, but remember to keep it out of drafts A fixture that is inside must not be placed outside! In addition to its thick heavy glass insert, this outdoor fixture has insulation on the top so the electrical wiring can be protected from the A porch ceiling with such a design would be beautiful.
It was an exact replacement for an older ceiling light fixture. It was easy to install, and I used an LED bulb which lasted My first step when I received the fixture was to permanently glue the glass globe into the wagon wheel metal frame as soon as I received it. With two small screws, the metal frame is fastened to the fixture. It may be dangerous to lose these screws or drop the glass globe (if you didn't silicone it to the.
As soon as the light is installed, it looks amazing. A rubber gasket is on the upper side of the light and there is another between the light frame and glass globe, so the problem is two rubber gaskets. You could squeeze the one on top into the space and hope that You could keep the one between the globe and the frame, but not the one between the globe and the frame. In order to avoid it falling out while I install the globe, I stretched it out and used crazy glue to hold it up. Besides that, it was a breeze to install and it looks great. Another way to prevent it from spinning is to secure it in yet another way. Despite its size it can only spin because it is held up by one screw in the middle. I paid less than half of what I would have paid in a blue or orange store, so I consider the discount price well worth it.