Questions & Answers
What are the dimensions of the standard switch plate? There are three switches with one plate and I would just swap this one out for one of the standard ?
If you want to add two additional switches next to this, you need a 3 switch plate with dimmer cutout for the fan control. The package contains 3 different colors of dimmer switch plate covers. It is therefore necessary to have a plate with 3 dimmer cutouts if the other 2 are dimmers.
Can you tell me the size and height of the actual unit, without the cover plate? The faceplate will fit into a standard "Decora" switch type opening. 1 is the number What does 25" mean?
It should work with any 2 gang decora light switch faceplate, but I have mine installed in a decora light switch faceplate, so I am not sure how large mine is.
In what ways are the WC400 and WC600 different?
You could use a WC600 with a good efficiency of up to 40 watts if your fan is 72". If you are using a 36" display and you only need 25 watts of power, you could simply
Could you tell me which Minka aire replacement receiver part works with the RC600 and / or WC600?
LW0010464000 is the part number for the replacement receiver.
Selected User Reviews For Minka Aire WC600 DC Wall Control or Remote w/Full Function, White
The Minka Zaire Raptor ceiling fan DC is compatible with this switch
It is convenient to have my fan and light controlled by a wall switch. This is something I dislike having to do with a remote. it because I saw in some reviews that it would work with the Minka Air Raptor ceiling fan and light. There appear to be a lot of distinctions between which switches the DC fans The switch worked as expected, installation was relatively straightforward and the installation went well. Tossing the old remote control (which worked but I didn't like it) in favor of the switch I used for the previous fan, I used the switch I had for my old AC In this case, I did have to change the code setting. Our wall switch was changed to match the remote control code after we compared the code on the wall switch with the remote control code. As far as the code was concerned, it was perfect.
| Sep 02, 2020
With each six-speed fan, this is an essential part of the package
Artemis XL5 is one of the best fans we've ever owned. Although unlike all our other fans, it operates only with a remote and has no wall control. Essentially, you set the dip switches the same way the remote is configured and then wire it in and presto - you've got it! A wall unit can switch off the fan or control it from its control panel. A second remote is like having an additional It is easy to install (you just need ground, hot, and The installation of this switch is easy if you know how to install a light switch. When something is just right, I love it. There are a few minor niggles/notes to make It features its own switch plates and different colored face plates (we panicked at first, but yes, they do have white, almond, and black face plates). On the other hand, the screws we used to screw it in on the switch plate cover were different from the screws we used on the switch plate cover.
| Nov 15, 2020
Despite your wife losing the remote control, you will still be able to operate This is easy and quick to do
WC600 (Wall Control As I recently acquired a Minka Aire ceiling fan that came with its own remote control, an RC600 (Remote Control = RC-600) this product was perfect for our newly acquired home Easy installation, it is a direct replacement for the wall switch that provided the single power for both the fan and lights. As long as I matched the dip switches on this to the remote control on the fan (which, I might add, was already matched to the receiver in the fan), My wife lost the remote again, and I was able to adjust/dimm the lights from this full-function wall control if she lost it again. The total time spent with the switch was well under 20 minutes.
| Feb 17, 2021
The ceiling fan manufacturer Minka Aire has a new line of ceiling fans with this pattern
The Minka Aire Raptor ceiling fans, which I just purchased, go well with these - I bought three of them. They were a great deal, and they were pretty easy to install (about 5 minutes per one). I love the fact that there are 6 different speeds. I highly recommend this book! Note Please read the following carefully. You should connect this to your fan in series Rather than just being a 120V powered "Remote", it has many more features. In other words, that wall control will have to be connected in series with the fan if you're adding a NEW fan to your home.
| Sep 10, 2020
Buttons of a tiny size
In order to make it fit into a handheld remote, Minka reduced it in size An application for the wall. Because the buttons are so small, it requires precision to select the fan speed under optimal lighting conditions. In dim or dark locations, it is impossible to select the fan speed at all. I consider it to be a disappointing design failure.
| Aug 27, 2020
The only question I have is this
It worked fine after installing it on the wall, however it does not work with the remote that came with it. The wall controller and handheld controller do not seem to have instructions on how to be programmed so that they work with the ceiling fan and light simultaneously.
| Jun 04, 2021
The handheld remote control functions the same way as the remote
When rewiring an existing electrical connection, this is an easy product to install. The handheld remote control functions the same way as the remote. From this seller, I was able to get an affordable price and a good communication update about delivery times.
| Dec 15, 2020
Adding this is great! This is a great addition to the ceiling fan control!
| Feb 28, 2021