Geekpure 10-Inch Big Clear Whole House Water Filter Housing 3/4-Inch Port with Wrench and Bracket -4.5"x10"
Score By Feature
OveReview Final Score
Questions & Answers
There would be a lot of stress on the plastic hose where the screws go into the housing, so it might not be advisable.
It is based on the following rates The system can handle up to 15 GPM (depending on the pressure of the water). For supply water pressures of 60 psi, a flow rate of 10 GPM is guaranteed when a 5 micron filter is used.
Can you tell me what brand the carbon is? It can easily be inserted into this housing if the carbon filter size is standard. As an alternative, Geekpure carbon filter may be used. Setting up is a bit complicated. Here are some tips. Here are some of the main points It is best to use a water pressure of less than 50 psi for feed water. The second half of the sentence is what follows The canisters must be removed from the caps, the O ring surfaces should be cleaned, and lubrication needs to be performed. In this case, it's the rubber on the outside of the A water-tight seal occurs between the cap and the sump, thanks to the ring. When choosing an organization, make sure that it is a good fit for you In the event that the ring is not properly seated in the groove, a leak may result. ** 3. Relate with other staff members. You can use the wrench provided and tighten very tightly. You may also look for "big blue whole house water filter" on YouTube there is a video demonstrating how to install the device. We can provide more support if you need it. Please reach out to us at geekpure.com.
It is indeed safe for indoor use, but not for outdoor You should consider black color housing if you are planning on using it outdoors. In addition, the life of all plastic housings will be shortened if used outdoors.