Deck Mount Pot Filler Faucet Brushed Nickel Finish with Extension Shank and 20" Dual Swing Joints Spout, SUMERAIN
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Hello, the hole size ranges from 22 to 36 mm, as shown in our manual. Thank you!
There is no temperature control because there is only one hose. However, the tap is fantastic.
That is something I don't think you'll be able to accomplish. If you take out the last bit, you'll be left with an opening that points up rather than down.
It's something we've been doing since October. There were no significant issues. Once, we had to re-tighten it to the counter. However, it's possible that this was due to the fact that it wasn't tightened up properly the first time.
Selected User Reviews For Deck Mount Pot Filler Faucet Brushed Nickel Finish with Extension Shank and 20" Dual Swing Joints Spout, SUMERAIN
UPDATED: br>I accept full responsibility for my poor first review (below). The instructions are mostly pictures with very little text. The brass "shank" features a large hole on one end and an Allen wrench receptacle on the other; The Allen wrench is shown at the end of the shank and the other in the faucet body in the instructions. What it doesn't say, and where my misunderstanding stemmed from, is that your Allen wrench must be long enough to pass through the large opening in one end, through the shank, and into the allen end, which is the end that threads into the faucet body. Please accept my sincere apologies for the initial review that was completely unnecessary. br>The faucet appears to be of good quality so far. The instructions could use some work. br>Original review (which is no longer valid): "Unbelievable," says the narrator. I just got this faucet, and the first part I tried to put together did not fit. Look at the image. The threaded brass "shank" is significantly larger than the threaded hole in the "faucet body's" bottom. br>NOT HAPPY! Let's see how long it takes for this to be resolved! Seller? Now is your chance to speak up. On every level, this is unacceptable! "br>Seller, please accept my apologies for the negative feedback.
The visual appeal of the pot filler is excellent. It moves at a fast pace. In comparison to other products, it offers excellent value for money.
I was so taken aback by this that I sat back and admired my DIY project, which was both inexpensive and functional.
I had this faucet for 14 months and loved it, but it broke at the bottom this morning, resulting in a kitchen flood. The bottom threads have been stripped.
I have back problems, and because my stove is on the opposite side of the sink, I use it all of the time to save my back.
It's stunning. The dual valves are useful for preventing water from spilling on my stovetop.
It's made of brass and has a brass nut, so it's very durable. A 7/8" hole was used to mount it.
Pot fillers are notoriously expensive, so this was a fantastic deal, but I don't like how hot it gets. However, because water on the stove is usually heated, ours was connected to a hot tap. Connecting it to the cold tape would prevent it from warming up, and this is the most common or recommended installation method.