Delta Faucet U4005-CZ-PK Adjustable Wall Mount, Champagne Bronze
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The screws are 2 inches long. When I put the showerhead on it, it would always fall. If I put it on the stick, it would always stay put. This was mounted for me by my son and it is working perfectly.
The swivel should be able to rotate freely The number could be 150 or more The holder can hold 160 degrees. Anything over that will fall out. It's simply a matter of loosening the nut and positioning it the way you like. To tilt up or down, do the same Shower head - similar to the one you are used to The holder must be mounted straight out from the wall and not on a standard shower arm (45 degree bend). A typical up and down angle is at least 30 degrees.
Screws are used to attach the bracket to the wall. In this case, it is behind the gasket of black color
The average piece of jewelry has some plastic in it these days, but this one is incredibly solidly built. As a result, the plastic that is used here is mainly used as cushions and as glides in a few wear areas. A shower head holder like this would likely outlast a shower head several times over, with a long life expectancy. To mount it on, make sure the backing is very good. As soon as someone grabs hold of it to steady themselves, the plastic plugs will surely fall out of the device. It was used in a mid-sized firm for which I am a contractor This was the first small bathroom I installed and both my 75 year old customer and I were very happy when we first installed it almost two
Selected User Reviews For Delta Faucet U4005-CZ-PK Adjustable Wall Mount, Champagne Bronze
i am pleased with this product. I installed it in my shower next to the shower bench at about shoulder height when we are I like being able to temporarily park the shower head (which is on a hose) in a spot that doesn't rain down on my head when I'm sitting in the tub. My foot would bounce around while I had my foot on the bench to shave my legs when I had the shower head hand free. I can now safely mount the device and it won't drop on my back, and it won't be floating around in the air! We have been using it in our shower mounted at about waist height and have been thrilled with its performance. When I come in from the garden dirty, I am able to step into the shower with shorts on and hose off my lower legs and feet. What a waste of time it would have been if we had done The product is a nice metal product with the same color as shown on the website.
It was a bit disappointing that even the sleeve was not metal for forty bucks. In the end, the whole vinyl floor in my bathroom cost more than this device. There are no holes in it which was a great bonus. It matches, it seems strong enough, and it fits my handheld. It's good enough for me. You will find the holes are 1 7/8s apart on center and mount vertically if you are looking for a replacement for a cracked or broken bracket, as I was. It would be possible to mount them horizontally as well, but it may not be as strong and would Even a lightly textured wall is covered by the gasket fairly securely.
Despite being solid and well-made, this shower mount is not cheap I made it. Although you need to use the (included) hollow anchors and screws for mounting, this is far more secure than suction mounts. It takes a little effort, but it is worth the effort. In order for the holder to function, a shower hose having a conical attachment to the hand shower must be attached. There will be a significant gap between the shower hoses with compression nuts. Make sure you order the correct shower hose before you place your order!.
It is the only one in existence. To secure this to the tile in our new shower, it had to be screwed through or well adhered. There seemed to be too much commitment there. There was some confusion about just exactly where the hand-held unit should be, so I went to the hardware store and got a suction-cup on the spot For a little less than 12 dollars, it is the only mount I know that works. Having moved it about three times, the unit seems to stay attached to the tile well. It remains under the sink, and I do not plan to use it.
Despite the title, it is a hefty, well-built mount that uses suction cups for easy attachment to your shower arm. This is not some $6 piece of plastic junk from Target you'd find at Walmart. In the end, it will be much more worthwhile to spend a few extra dollars on this. The material used in this shower will last longer than the material used in most people's showers (this is more a comment on the terrible construction of most people's showers than anything else). It is a pity that stainless steel and other finishes are so much more expensive than chrome. It's kind of a bummer. It was great to have Chrome work with.
The installation on my tile shower wall took me less than a minute. As long as you have a drill with an electric motor and a 1/4" masonry bit, the whole job should be pretty easy for you. With two brass screws and a rubber gasket attached to the wall, the holder will stay attached For wet areas, this is an excellent touch. A lightweight metal, plastic and rubber construction appears to be adequate for the holder. Using it, I have only had a little kickback when turning it on when holding the shower wand. The slope is a bit steep, though, and I wish it angled downwards. Still, the arc of my powerful shower wand shoots across the entire length of my bathtub and hits my bathroom As well, the price is too high for what it is. It should cost you about 20 bucks at the most. Therefore, four out of five This is an excellent holder, but it is overpriced.
Rather than a fixed mounting bar, I ended up getting one that slides. In my particular circumstance, it was easier to mount and have an effective shower. As a result, I am not able to comment on it except to say there are better and more useful resources available.
There was a problem with a hand held shower mount Our first thought was that it was a delta brand, since the shower head was a delta one. Our flight was diverted to Delta, but Delta informed us that it was not their fault and they could not Therefore, I began searching for an organization that would be able to help me. It turned out that the mount from Delta brand produced perfect results and matched the shower head's finish. It seems like this mount is much stronger than the other one we had and it should not break under the weight of the shower head. Even though it sticks out a bit more from the wall, it is really well made. You can use any finish you want. The mount is very convenient and easy to use.