DANCO Bathtub and Shower 3-Handle Remodel/Rebuild Trim Kit for Gerber Faucets | Knob Handle | 11B-1H, 11B-1C, 11B-4D | Chrome (39617)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I was able to wear it without a Seeing as you don't need to buy an extra wrench to remove the guts, you don't need to buy it. In my case, it was impossible to take the little brass clips off of the old and I left them on anyway. It was evidently not a leakage problem on my part. What I'm talking about will become evident when the kit arrives.
You have contacted Danco. Thank you so much. You will not be able to use this trim kit.
You have reached out to us. Thank you so much. This does not usually need to be done.
I'm not sure what the model number is.
Selected User Reviews For DANCO Bathtub and Shower 3-Handle Remodel/Rebuild Trim Kit for Gerber Faucets | Knob Handle | 11B-1H, 11B-1C, 11B-4D | Chrome (39617)
However, for the price you pay it's not as good as the original because it's made in China and the quality is not the same! You ought to buy a seat wrench when you change out your parts. When you don't have the tool, it's a pain in the a$$ to remove the old seats. In addition, I highly recommend purchasing a new oring set as the brass that the old seats are mounted onto could be corroded and the faucet will leak again, especially on the hot water side.
Everything I'd hoped for and I love it. The stems of valves alone are priced at $20 each. You would be looking at about $100 for this set if you purchased the pieces individually. I was completely satisfied with everything. It took some research, investigation, and the grace of God for me to determine what I needed to do. Originally installed in 1967, this hardware replaced the old one. It's been two years since I bought the house. As a result, I hadn't a clue what the brand was and how it was installed. However, this set worked perfectly for me and I was.
Although I wasn't sure if I had Gerber stems and seats, it seemed to be the same so I thought I would try that. All the pieces were in good shape, except I was missing a phillips screw I was just looking for new hardware so it's no big deal. There is a valve wrench in the kit, which I didn't need but is nice. It does not come with a valve seat tool, which I needed only after I found it You should buy this if you have leaking or dripping seats, and you have replaced the washer a million times. You will need to replace the seat because you will need to replace the washer. For this project, I only used the seat and bezel for one faucet. The stems are almost exact copies of the current ones. They were at least as cheap as Chinese knock off Gerber ones from a plumbing supply house. They are about $25 to $35 each in the real world. There were no leaks, and I have also received three new valve stems with two seats as a bonus. Compared to the old knobs, the new ones are shorter, which look better It is imperative that you replace every component of an older setup because they do not match in the slightest. The product would be a good buy If they're going to include the valve wrench, charge 2 bucks more really it's just metal. If the kit came with my missing screw, I would have preferred it, but I hope it comes with a valve seat wrench.
In my old building, I was concerned that the Gerber kit would not fit in, but it did and it worked beautifully, I am very thankful to DANCO for making my installation so easy. I followed the instructions in the box and after 40 minutes the process was complete, thank you!.
The kit is easy to install and includes instructions and the faucet wrench. However, I needed a one for Price Pfister faucets and I bought a Gerber one. Because I made the mistake, my rating does not change. Be sure to read the fine print It may be possible to take one or more of your bathtub handles to the hardware store in order to compare them. In general, the prices are comparable, and it should be clear which type of faucet is right for you. It is possible to look up different faucet types at home instead. I wish you the best of.
The kind of guy you meet at the bar. My advice is to take an O-level, even if you think you won't get one It will do the trick to place a ring here or to apply plumber's tape here. Just lay down your weekend warrior tools and call a.
The product works well. This product performs as expected. Though my plumbing skills are limited, I found it easy to install (I replace an outdoor shower handle for the first time! In my opinion, the handles aren't going to last very There were already broken pieces of plastic in the box! In addition, the handles for hot and cold are broken (there are broken caps on the handles).
It is a good fit and works well. They need maintenance on a regular basis, in that they must be disassembled and lubricated or they will become difficult Install the stem and give it a lube and service before installing.
Related Products For DANCO Bathtub and Shower 3-Handle Remodel/Rebuild Trim Kit for Gerber Faucets | Knob Handle | 11B-1H, 11B-1C, 11B-4D | Chrome (39617)
