Shed Door T-Handle Lock Kit - Includes 2 Keys, 2 Screws, Allen Wrench, 4-1/2" Stem, Shed Lock, Barn Door Lock, Playhouse Lock & Chicken Coop Lock (Black)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A bit more than 5 1/2 inches on average.
Then remove the old handle, slide in the new one, screw it to the door, then slide the back handle in and secure it with a screw.
Instructions for the lock kit are included, but those for the doors are not. Online, you might be able to find it.
The answer is yes. It is possible to see through to the other side of the D handle. Consequently, the thickness of the handle does not need to be a minimum.
Selected User Reviews For Shed Door T-Handle Lock Kit - Includes 2 Keys, 2 Screws, Allen Wrench, 4-1/2" Stem, Shed Lock, Barn Door Lock, Playhouse Lock & Chicken Coop Lock (Black)
Although it is a very nice shed door lock, since I do not have any experience with locks of this type, I would give it three stars - The average person. I.
Getting it up and running was easy. Please check 2. On a door with hinges on the outside left and a lock on the outside right, the lock is installed over the latch. The third paragraph. Most locks have a vertical key slot when locked, but this lock has a horizontal key slot when locked. Therefore, operating the lock is not as intuitive as it could be. A standard house key is noticeably bigger than the key included with the package. *1. *2. *3. When I operate the lock, I have to pay close attention to how the key teeth are oriented. The teeth on the key need to face left when the hinge is on the left, and right when it is locked. In order to unlock a key, rotate it 180 degrees counterclockwise. In order to lock it, rotate it 180 degrees clockwise. It is not necessary to return the key to its original position once you have rotated it. Since most house locks are horizontal slot locks, they always rotate back to the same position regardless of whether a lock is locked or unlocked. That took me several tries and some real brain-racking to figure out. It's easy to learn how the lock works once you understand that. 3.
4. It is possible to lock the door of the shed from inside by using the locking bar on the inside. Note that you can rotate it to the locked position while inside the shed if you pull the door shut. There is no lock, just a closed door. Operation of the key is separate from this. This is sixth. Also, it is possible that someone could be locked inside if someone keyed the lock shut from the outside while the door was If that were the case you would not be able to open the lock from the inside! In the event that an allen wrench was handy inside, you could take off the handle and leave.
You need to waterproof it when you install it. In five minutes, I was able to install it. Was even able to do it without It is easy for anyone who has used a screwdriver to do. Although I filled the inside with bearing grease and caulked where the handle meets the wood to prevent moisture from seeping in, I did not seal the exterior. It was only because the original became difficult to use that I had to replace it. My discovery of rust inside the original handle was evident when I took the handle off. In order to waterproof the new one, I waterproofed it. The keys cannot be duplicated at Lowe's either. Since one of the keys was broken, I had to throw it away. I haven't had a chance to visit Home Depot or Ace Hardware. It would be nice if one of them could copy the key for the other.
I bought the 4-pack of keys A 1/2-inch T-shaped hole A handle lock (black) for a storage shed that already had a T-shaped lock I had the handle lock on it, but there was no key for the lock and I could not find the inside "D-" initials. Take the "handle". Thus, I purchased this product to replace the one I was using before. I was able to install it without much difficulty. If you want to do it - Put the new handle on after removing the handle lock (removed 2 Philips screws). It was the two square bit screws and bit that came with the new handle that I used. (If you do not have a screwdriver or drill, that can fit the square bit, you will need one. One can only use the 1" bit without a handle, because the bit does not come with any handle. With this handle, you can set the set screw using an Allen wrench (included in the kit). If you don't like D-, you need to change it On the stem, turn the handle in or out as appropriate so that you can grip the opposing door jamb. Despite this, I gave the product 4 stars since one of the two keys that came with the lock handle was bent when I received it. While the key metal is very soft, I could have bent it very easily by gently straightening it out with a hammer. A cracked key in the lock might break off within the lock if the key has to be torqued in order to lock or unlock the handle as the lock gets old/dirty/rusty. By having the locksmith fabricate better key blanks, I will have extra keys made. I, as the customer, will incur additional costs as a result. As far as the lock was concerned, it worked as expected and fit perfectly in the same hole as my previous lock There are no problems with the handle lock or any other component.
One of the door locks on my old corrugated metal shed needed to be replaced. A replacement for the lock set that worked for my other door was not available, and I tried several lock sets that did not When I ordered this one, I was a bit skeptical, but it went in easily and worked well. A brief summary of D&D A medium-duty construction and medium-duty materials allow for adjustment to many situations, including mine. The handle arrangement can also be adapted to a wide range of situations, as well as mine. The mounting screws I had were small, so I changed them for.
Those that were already keyed the same way were replaced by the new ones. Therefore, it will be possible to restrict who can enter each outbuilding.
Installation was very straightforward for both of them. I was surprised at how quickly I was able to finish that project. Their quality appears to be good and they work well.
The handle for my broken handle seemed similar, so I sought it out online. I ordered it, but the envelope it was shipped in was empty the first time I got it. A link on Amazon led me to Grand Central Supply, which refunded my money and sent me a new one We ordered it. After the second shipment, all holes were already there, so drilling new ones would not have been difficult. Installation was simple this time since all holes were already there.
There's a great deal of strength in this handle. Upon receiving it, it was packaged in a very nice box, which included a plastic tray where the handle parts were stored. Because the square shaft of the swinging door was not long enough to fit my shed, I had to return it.
There was a large shed at the property we just bought. We included it in the purchase price. It was an old house, so I knew that the old owner was not someone I could trust. So the first thing I did was to change the locks on the house and yes, the shed as well. All of us keep a lot of valuable tools and machines in our needed to replace the lock, and this was just what I needed. The little bit of security it provides adds to my peace of mind, so that helps. It is a product you simply cannot go wrong with.