2 Sweep Silent Clock Movements with 4 Pack Different Size Clock Hands, DIY Wall Clock Movement Mechanism Battery Operated,14.5mm (37/64 inch) Shaft Length 7mm (9/32 inch) Thread Length.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In short, yes. The second hand is continuous motion.
I discovered that the hour and minutes hands were not parallel AND that their joints weren't secured properly when this occurred to me. In order to remove both hands and place them parallel on the shaft, I removed them. Ensure your hands are in the following positions Battery should be inserted at the 00 position before the 00 position.
I do not know how thick that clock face is. Basically, I think you need a shaft at least 3/4" long. I would aim for the longest that is available to you. If the clock is assembled, it isn't noticeable that there is a little extra pushing out at the front.
As far as I know, I haven't measured. Replacing the movement of a clock is a standard procedure. Three eighths of an inch
Selected User Reviews For 2 Sweep Silent Clock Movements with 4 Pack Different Size Clock Hands, DIY Wall Clock Movement Mechanism Battery Operated,14.5mm (37/64 inch) Shaft Length 7mm (9/32 inch) Thread Length.
We had a clock that we liked, and it was very sturdy. Therefore, I found this product hoping it would be able to save I had no trouble installing it. It was easy to follow the instructions. After setting the second hand, the hour hand, and minute hand to 12, I set everything else to According to the instructions, it is $00 per person. Once the clock had been reset to 11, I found myself in the following situation Twenty minutes after the current time The clock was still keeping perfect time until it reached twelve Despite the movement of the second hand, the hour hand and minute hand remained stuck The current time was 1200 despite the fact that it was 0000 To 12 o'clock, I moved the time forward. From then on, it has maintained perfect time. Now that it is over 3 days, I need to ask for your help. It's not clear if I did something wrong or if it's just a quirk of the system. In the future, if I need to fix another clock, I would get this product again.
It is a good choice because the hands come in a variety of lengths and it has two mechanisms. You need to watch the center shaft length to make sure the hands don't protrude too far and rub against the glass. The little box looks pretty standard, but you have to know the size of the little center shaft. Using a short URL for the clock will prevent it from passing through whatever platform you are using for the clock. I hope you all enjoy it, anyway. This kit included all the There is even a second hand in this clock that did not originally come with it. Installation was not difficult. With just a Phillips head screwdriver and a needle-nose pliers, I removed the clock face and cleaned up the clock scale. An open-nosed plier is required to hold the fastener in place (or any pliers would work) to prevent the mechanism from being accidentally disengaged.
We needed to replace the movements in two clocks. There were two watches, both of which had Youngtown movements. The new Youngtown movements snapped into place, while the original hands fit on the new ones. It did not have an older Youngtown movement like that clock. While the nut of the new movement was a bit larger, the new Youngtown Movement fit the original movement. It would have been helpful to have an extra millimeter of shaft length even though the measurement of the original shaft was just one millimeter It was impossible to attach the original movement's hands to the new movement, so I had to use the hands that came with the new movement. It is apparent from the photographs that the new hands work, but are too large for the clock. Although the clocks should have been given 5 stars for the selection of hands, all two clocks have been right on time within six weeks after the retrofit.
Installing the clock movement was not just hard, but getting the arms to align with the temperature gauge beneath was tricky as well. Having this product I am very happy with. I now have a working clock that has a second hand that I can use to time my laps in the pool or on the barbecue.
After being installed to replace a clock fixture that had a problem, the unit works well. Only after reading only a few of the reviews could I give it 4 stars The phone did get hung up a few times in the same spot after 6 weeks. It had been running smoothly up to that point. Since I moved it around, the system has been running fairly accurately. It's great to see it continue!.
It's a great purchase. I'm completely satisfied. The clock I purchased was unrelated to this joke, so I didn't realize it was broken. In the end I contacted a "clock repair" website (which did not have the particular movement I needed. The email was updated several times with pictures and measurements, and still no response! Amazon gave me a seller I could trust after I searched a bit. My package arrived with TWO movements when I thought I was just ordering a single movement. Straight from the source and running smoothly as This is a great value, and it appears to be great quality as well.
Simple words to describe how happy I am with this purchase!.
The parts attached easily to the old clock, and they were the perfect fit! Click to continue Click to continue The more ticks I hear, the more crazy I become). The directions from Youngtown are greatly appreciated. My first thought was to line up all the hands on the midday hour when setting the clock. They were very easy to understand.
I have replaced the movement of two dead clocks that arrived last eve, which has kept the time. Returned to work after being sick Place one set of hands on top of the other, replacing the other set with the supplied one. *Updates will be made as time goes on. The first half of the year has been pretty good.