ENERLITES Blank Device Wall Plate, Glossy Finish, Standard Size 1-Gang 4.50" x 2.76", Polycarbonate Thermoplastic, 8801-BK-10PCS, Black (10 Pack)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The answer is not clear to me. Whenever possible, I purchase products made in America or a country that is allied with the U.S. However, I don't remember whether this product was made in While the company headquarters are in California, the fact that it produces products there is a mystery.
Each wall plate comes with two screws so that it can be mounted
There is no doubt about the flexibility of the devices. Polycarbonate thermoplastic is used to make them. I wish you the best of luck with TopGreener
If you want to paint over them, you can do so. It is unclear as to what effect chipping or flaking could have on the environment and time, so we cannot make any claims about
Selected User Reviews For ENERLITES Blank Device Wall Plate, Glossy Finish, Standard Size 1-Gang 4.50" x 2.76", Polycarbonate Thermoplastic, 8801-BK-10PCS, Black (10 Pack)
The T cable was one of the outlets I saw when I was baby proofing my house. At first, I thought I needed outlet covers, but then I discovered the T cable. The baby was risking contact with V cable plugs and telephone plugs (neither of which can be used by us) and I had no clue what to do about it. In fact, it wasn't hard at all! If you do this, you will have to unscrew the outlet and the cable from the wall and then cover the cables with these inexpensive and attractive blanks. I have found these to be very effective at covering For baby proofing, outlets with telephones and televisions should be installed.
It would be nice to have some white blank There are usually some standard styles, regardless of the brand. Occasionally, I like to have harder material ones that can sometimes be more difficult to install, but they are more expensive than usual. The fact that they are not made of hard materials makes them easier to install. Also, it makes it easier for them to make tight fits to the drywall and make it They match plates from other manufacturers well in terms of color. It is common for some plates to be larger than others to cover a little more of the surrounding area if the drywall wasn't cut perfectly. Plates of this size are not available. The plates were perfect for what I needed, as they were not huge. Furthermore, you can sometimes easily chip the paint off screws. didn't have that problem, so when they were installed, they stayed looking nice. If you don't need a specific size plate, these will be perfect. If you need larger ones to cover a larger drywall hole, buying them individually is probably best.
I recently had to replace all the nasty old tan/yellow wall plates that were probably from when my townhouse was built. First steps in the process were to remove the old wall plates. They were much more difficult to replace with these Enerlite wall plates. Due to the way the originals were mounted, I had to use longer screws on some of the plates as the screws that came with them did not have white tops. This is nice. I like the way it looks. An image of my last painting against an ivory wall is shown in the photo. Since the rest of the walls in my townhouse are grey, white wall plates provide a much more pleasing appearance. It was a great value to get a box of ten for the price.
order to accomplish that, we needed multiple blank plates so she would not be tempted to put her fingers in cables or electrical outlets that are not I got the job done by using these. My original plate was measured before I purchased these so they could be compared. A gap/hole would be created once the door was installed if the door was bought which didn't measure and were a little short. recommend them for Baby Proofing since we haven't had any problem with our daughter approaching the "blank" portion of the room.
Painting my old wall plates over was a lazily done project. It was easy to replace my existing painted over plates with these because they are standard size. Make sure they aren't overtightened to avoid cracking. I was very happy with how much was offered It can be a challenge to install some outlets with 6-inch screws I used 8 My local hardware store sells stainless steel pan phillips machine screws in size 32 x 1.
Whether you need them or not, they are exactly what you need. It is a good idea to measure the old cover just to make sure they are lining up or overlapped. In order to avoid paint lines or discoloration, you should make sure the paint is evenly coated. If you choose to purchase an 'oversized' cover instead of these, you will have to spend a few extra pennies. In the event you intend to paint the material, it is very rigid and accepts paint very well. Painting can be seen in the picture. It is a pure white product that arrives.
Throughout all the rooms at the baby's house, these covers were put over all the outlet jacks. What a great tool! It gives me peace of mind to know that they cannot use the outlet in any way.
Although the plates were of good quality, the screws included with them were utterly useless. Due to their tendency to strip, they are useless and need to be replaced with others that will work, which is not the easiest thing to locate without requiring painting.