Construction in steel for application on sidewalls or ceilings
With a multi-shutter damper, there is a two-way air deflection
Depending on the size of the grille ordered, there will be a variable number of louvered columns and mounting holes
Product sizes are determined by the dimension of the duct opening, not by the dimensions of
Questions & Answers
When you say 12x6, does that mean the opening size of the air duct, or how big the outside is?
In short, it measures how big the opening is for the duct.
Can this help with condensation that is only very minor. Can you please tell me what to do about the aluminum one in my bathroom?
The answer is probably no. When people shower, they sweat because the bathroom space is warm and humid during the shower but the vent is cool. Take it outside when it's hot and it'll be cold, just like a glass of cold water. In case you possess condensation in your bathroom, you need to reevaluate your bathroom vent fan. You might not have sized it properly or installed it in the right spot to remove a maximum amount of air.
What is the distance between the screws on the 12x6?
Between each mounting screw, there is 13 1/8" of space. You have been contacted. Thanks for your interest.
We're looking for something to help dim the hallway lights and block out the noise. What is the effectiveness of ?
The reason we got it is because of that. The noise is not too clear to me. Since it is an empty house and our walls are paper thin to begin with, there is no one living here to make noise.
Selected User Reviews For Accord ABSWWH284 Sidewall/Ceiling Register with 2-Way Design, 8-Inch x 4-Inch(Duct Opening Measurements), White
The store is just down the road
In this case, the distance is the distance between the According to the article, the ductwork is 11 1/8" from center to center, which didn't match the ductwork in my house. Furthermore, it is different from all the other 10x6 registers they have at the store, so it is likely that it is not standard.
My advice Don't buy it online go to a hardware store with your old register in hand. Compared to what I bought in the store, the one I bought in the store was considerably.
| Jun 28, 2021
REMEMBER that the shape of the cover is the outside dimension size, not the duct size. Keeping this in mind, I spent an hour trying to find it at Home Depot, no one on the floor knew how to choose the right cover size, I wasted two trips to figure this out, now I know how to get the right cover size, don't It's also worth pointing out that the grill grates at Home Depot do not come with two long screws, so you have to buy them separately for an extra It is helpful to take the grill grate off FIRST, and than measure the duct size. You will need to use the duct size dimension to choose your new grill grate, or to do an Internet search for a cover grate at Amazon or somewhere else.
| Apr 19, 2021
A fair amount of strength A gasket is not present
There are a lot of instances in which this is the right replacement. There are no problems operating the shutters, and the shutters are fairly durable. If the wall location is not obstructed, this is not a problem. Because some of my old ones were right next to an adjoining wall, this register would not fit in those areas.
| Mar 09, 2021
My entire house is covered with this product
My ceilings in my home were worked on so that the popcorn effect was removed and all the 'taping' was replaced to produce a clean-looking ceiling There has been a change of In order for the clean look to be completed, I wanted new vent duct registers. There is no doubt about their durability. With the aid of axle grease applied to the lever mechanism, I improved the open/close function. As much grease as possible was used since dust in the air will accumulate on excess grease. (It's always frustrating when trying to close a vent and the lever will not move) I used the lowest amount of grease possible.
| May 16, 2021
Most users will probably find this to be satisfactory
The item itself is fine. The material is great and the mechanisms work well. It comes with all the installation items you need. What I don't like? It's a little larger than I expected. This fits the vent, let me be clear on that. To make sure it fits right, it says to measure the hole of the vent. This makes perfect sense, and it fits perfectly well. As it turns out, the outside of the new one is bigger than my old one, so I will need to make a new hole in my wall to make room for it. Even though it may not seem like a big deal, the old house already had specific holes for the vent (such as one on the outside of the vent with a grill hole), so I will now have to create other I find it kind of annoying. To ensure that the vent and outside are sized correctly, I feel there should be an accurate measurement for each.
| Nov 16, 2020
Fits, is functional, and is clean
An air conditioner vent cover does not necessarily garner excitement, but when you compare this new, clean, fully functional cover to the dirty, thickly painted, non-functioning one it replaced, one can imagine it may be worth it. A perfect fit could not be found. The opening should also be measured, as other commenters have suggested. In addition to being painted the same white as the cover, the included screws do the job. There's no way to know how long the plastic louver knob will last, but right now you can open/close the vent with a minimum of effort. There are fewer parts on this one (fewer parts) compared to the one it replaces, so it won't get dirty as fast. I am very satisfied with the results.
| Sep 28, 2020
There are some dents and dings on the car
This is a great product in terms of quality. The only thing I would change is the price. Back is a vent that has many paint dings and another that has a dent in it. There is a need for better packing by the seller. A brief update There is a tendency for the screws to break. The one I used broke half way through. A star has been dropped.
| Sep 12, 2020
Units like this make a great addition to a home
This is the 12 inch by 6 inch that I ordered. Units like this make a great addition to a home. Our ventilation hole in our ceiling is 12 inches by 6 inches, so I ordered the 12 by 6 inch unit. We had a ceiling register on the ceiling that used to route the cold air from our air conditioner directly over my wife's head while she slept. My favorite part of the Accord register is how it moves the air to the side. My only complaint is that the vanes on the inside of the unit came loose on one side, but that's easily fixed in less than a minute, so I can leave the review as is. It has been said that some people had to drill new holes, but my holes lined up with the existing ones There are already holes in the ceiling, so there's no need to worry.
| Sep 12, 2020