PRYSM Range Igniter Replaces WB2X9998
Score By Feature
OveReview Final Score
Questions & Answers
We regret to inform you that this model will not be compatible with this.
Thanks for stopping by. Your model requires a part number WB2X9154 for the igniter. I would like to thank Snap Supply for everything they've done for me!
We were unable to figure out how this would work with In order to power your unit, you will need the
My Wolf Oven works no doubt, but I am not sure if it will work on others. In the same way as the previous igniter, it appeared to be the same. As the igniter bracket was welded to the burner in the Wolf over, we did not use the new bracket, but it was a quick and easy swap.
Selected User Reviews For PRYSM Range Igniter Replaces WB2X9998
There is no gas at all. Wouldn't it be better to call in a $100+ repair company? The sentence above is incorrect. As a first-time homeowner, I feel that this investment of $17 and 20 minutes was well worth it. That's really what I mean. The father of my children- About a gallon of water was accidentally poured on our stove by the law. Even after a week of drying it out, the oven would do nothing even with the burners working. It occurred to me to take advantage of the Amazon return policy to see if that might fix the issue. It was easy to pull the old igniter out by removing the oven racks and hand tight screws. The check engine light was on, but I removed the two screws and disconnected the wire cap. In the old screw holes, this igniter fit perfectly. Even the preheating time is faster now. Our oven is now consistently heating up when we turn it on. There are numerous pros to being an Amazon Prime member Easy to install and works great! Low price product at an affordable rate. A repairman is considerably more expensive than a plumber I am your father- Laws pertaining to the P. P. The love I have for my father is deep You cannot disregard it.
By replacing this part, I was able to fix my oven that was taking ten minutes to heat A week later, it took 15 minutes to get hot, then in the end just stopped. In addition to the gas safety valve I purchased, which I think was also the likely bad part. The old one glowed red when hot, so you would assume it was working, but apparently the heating element still needs to be drawn enough current to activate the gas valve. My oven would start when I tapped the safety valve with the old igniter, so I suspected that was the problem. Since the other part worked and I installed this part, I'm keeping it in case I need it again. One thing I would advise is that just because your igniter glows red does not mean that there is no.
For OEM, you will need $800. One of my friends was trying to manually light my oven during a power outage when I have a brand new Samsung gas range. His first encounter with an igniter was as a pilot light, since he'd never seen one before. He touched my perfectly good igniter and broke it, so it is not exactly a big deal. You should know these igniters are made of carbon and are very fragile. I was going to have to pay over $100 for an exact replacement from Samsung. Therefore, I decided to order the generic igniter because it was less expensive than the ordinary model. My order was placed on a Saturday, it was shipped via the Post Office, and the package arrived on a As fast as that was, it worked perfectly, although I had to use the wire nuts that were provided to connect my original wire ends to the replacement wire ends. This is no big deal. It was easy to light my oven and I saved money compared to buying a new one.
There doesn't seem to be a specific application for these little igniters. The light will come on if its hot enough to light. It just needs to be mounted. I am disappointed in the longevity of the product, but am really happy with the product. A reasonable price and easy installation make it look decent. Make the connection to the new igniter by cutting the old wires just before the porcelain wirenuts, and then getting new wires and new wirenuts.
It was simple to install, the instructions are on the internet. I discovered that taking off the oven door (on my Kenmore model 790) made installation easier since I did not have to reach too had not received the ceramic wire nuts because the box I received came open in the envelope and I found that the wire nuts (which I thought were porcelain) were in a plastic container at the bottom of the envelope (which I'd thrown out and then found). It was very clear what was expected. Except for the time I spent washing the oven, it probably took me about 20 minutes. joining them with wire nuts was also a breeze. As the oven began to light up a few seconds after assembly, it gave me great inspiration. To anyone looking for a range igniter to replace their own, I would highly recommend this range.
part needs to be replaced for the second time since it was installed on top of the There is no way to know how long this can last (the last igniter lasted for As a plus, I can easily replace this part since it is reasonably inexpensive. There was an extra spare in my purchase. I just wanted to make sure.
As a result of having a double oven, I have used 2 of these and they have worked great right out of the box and have been a great alternative to the original. The only thing I would like is she put ceramic wire nuts in her product that can handle high temperatures.
I have been able to get my old GE oven to work The only wish I have is that it was compatible with a host of ovens so that I could simply plug it in. That's probably not possible, though, given the variety of ovens it works in. I tried to use the wire nuts, but it didn't work.