* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black

Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black

Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black
$ 5.65

Score By Feature

Based on 1,956 ratings
Light weight
8.90
Sturdiness
8.53
Durability
8.49
Easy to install
7.98
Value for money
7.98

OveReview Final Score

How Our Score Is Calculated

Product Description

The hand guards and ends for MOEs are designed for use with them
The physical size of the device is L2 (5 slots), with a maximum overall length of 2 inches. One and a half inches
The diameter of two inches
The USA is at the forefront of this technology
The handguards and forends for the MOE line of guns are designed to fit these forends
This mount is designed to attach various 1913 Picatinny rail-mounted accessories such as lights, vertical grips, and so on.
This product comes with beveled ends to prevent snagging and eliminate sharp edges and corners

Questions & Answers

Is the meeting going to last long? Can you tell me how wide it is? Can you tell me how far apart the two screw holes are? There should be a description for this! ?

There are three holes in this unit on a center to center spacing of 1 3/16" long and 7/8" wide. You can tell how long and how wide the rails are by looking at the rail number. I don't know why they don't let you know I wish you a lot of fun shooting and safety!

The set is it comes with screws and nuts?

The answer is yes. The nuts and washers that secure the screws

Can these rails be mounted on a keymod rail system?

The MOE magpul system is not the only one that works

The Magpul Light Mount can be attached to this rail, but is this enough?

This light was perfectly long enough to attach a sure fire light to.

Selected User Reviews For Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black

The device can be mounted on any surface
5/5

I can prove it with my Tactical Stapler. The stapler I use in the office needs to be distinguished in order to deter office theft. I figured I could lend some insight having worked for the US Army for decades dealing with black things that go bang. As it turns out, yes. Here it is! This is the experimental prototype for a As a result, I now have the means to mount sights, grips, bipods, slings, and lights professionally to improve my stapler There's just something about Magpul stuff that I love. Basically, it is the best buy when it comes to tactical customizations (in spite of the pun). In my opinion, if I were in the market for rail, this would be the first product I would consider, regardless of price. I read quite a few questions in this product description. Questions are generally along the lines of "Can I mount it to _______?"? In fact, yes. The answer is yes. It is possible to put rail on just about anything the imagination desires if you're willing to improvise a little. Although you'll need to plan, fabricate, and think about it, it's possible.

Nathalia Atkins
Nathalia Atkins
| Nov 16, 2020
This is not the same as It is impossible to provide a complete description of the item
5/5

As far as I was concerned, this is bootleg MLOK hardware and MOE is simply a rail design style similar to As for why this rail wouldn't fit my MLOK stock, I emailed Magpul and they explained that MOE is a whole different mounting standard than MLOK, and they aren't meant to work together. There are two sides to this, the first is that a informed buyer will do well, but it would be a good idea for Amazon to make it clear that this is NOT MLOK compatible.

Cyrus Lake
Cyrus Lake
| Aug 04, 2020
There is no meaning or purpose to LOK anymore
3/5

Despite the fact that I am not that old (yet), I remember when Weaver rails were As Picatinny rails came on to the scene and became widespread in the middle of the nineteenth century It was then that KeyMod arrived. I then - It was all the rage to wear LOK. It would be great to simply go to Picatinny again. There is a heavier weight to it. The universality of it remains, however. I-

The LOK system no longer adheres to a uniform and universal mounting scheme. The manufacturer of the M-series couldn't help but admit it The LOK system (MagPul) makes sure all things are All M-series rails need to be modified in order to fit these polymer rails Handguards with the LOK logo. Two different mobile devices were used to test them I tried two different LOK handguards for two different rifles and neither of them worked. More than two million square feet are devoted to them As a result, you can mount in the middle of a long space and let play ebb and flow. Definitely not a good thing. In addition, there are the "nuts" that come with the rail (stamped, flat, TicTac-sized ) are threaded metal strips that do not qualify as standard, machined T-shaped bars A set of nuts that have been packaged There are several accessories from LOK. It's impossible to even insert the nuts into the M-bolts because they are so wide Slots or holes in which LOKs can be inserted. Since they are larger than typical M-sized clothes, they cannot be worn in those Lok systems are a kind of computer. In any case, it does not matter how you look at it The nuts are not only too wide but the bolts are too long to clamp). While I considered inserting the bolts from the outside, sliding the nuts into the handguard, and then tightening the nuts to clamp, the nuts are too wide and Due to this fact, if your handguard is curved on the bottom (most are, few are flat), you won't be able to claim it down flush (unless you bend the metal strips or nuts). Furthermore, Amazon does not allow returns if the products do not perform the way they were supposed to. You should be very, very careful when ordering these, and make sure that they will work with your software in advance. These aren't universal and standard, but they aren't U- This is OK. There are no words to describe them. M- is defeated in its entirety when they do this Look at that. When MagPul decides that 1mm is really 1, it feels like we're living in a bizarro world. The diameter is 3mm, and the width is 1mm The width of an inch is From 87 to A square inch.

Kinsley Mitchell
Kinsley Mitchell
| Dec 27, 2020
Rails for S&W M&P 15 Sport 2 are perfect for adding rail to the stock rails
5/5

Adding a rail to stock Smith & Wesson rifles was simple and straightforward using this kit It is manufactured by Wesson M&A Using this as a mounting point for a bipod, I used the P 15 Sport 2 Handguard. In the same way, the handguards could also be topped off in this way.

Kaia Williamson
Kaia Williamson
| Dec 08, 2020
The bad news is that nothing good has happened
3/5

It was my first purchase of this type of item for my new AR pistol, so I didn't expect much to come of it. The package arrived in less than 24 hours which is excellent. It was in excellent shape outside of its packaging. In order to attach the picatinny rail, I had to work the screws in order to fit into the magpul slots. However, the screw parts were too big to fit inside the slots, so I had to make them smaller. I tried to tighten the screws, and the heads of both screws rounded out. Right now, the picatinny rails on my pistol are loose and I have no way to tighten them. As a last resort, I'll have to saw through the screws between the rails if I can't use shims to tighten the rail. This item would never be purchased by me again, even for the price.

Yusuf Marsh
Yusuf Marsh
| Jun 15, 2021
This is junk
3/5

I'm a big Magpul user, own many of their products, and found this product to be completely useless. In order to use a polymer rail section on a bipod, this is not possible. As a result, it eventually gives If fastener becomes loose, then it will need to be tightened to allow thread to be exposed to barrel. The item I discovered to be faulty was returned for a refund or credit after discovering the fault. We regret to inform you that the package has been shipped and received. For this item, Amazon does not offer return policy.
I was very disappointed to discover I couldn't return this item within 30 days, and Amazon gave me a link to contact customer service. Whatever item is disposed of in the trash will be a lesson. * Buy items such as these from your local retailer & A polymer rail section should be avoided.

Catalina McFarland
Catalina McFarland
| Feb 19, 2021
However, installation is an inconvenience, and the product works great with MOE furniture
4/5

Magpul equipment is high-quality, as anyone who has ever used it can attest to. In this case as well, nothing has changed. A good plastic (as far as I'm concerned). Installation requires removing the MOE firewall you have to remove it to do so. I find this kind of inconvenient considering other items, such as the hand grips. The picatinny rails would be more up to date if those "T" bits were used rather than generic tabs. In any case, it looks like a great product and will do its job well.

Aarya Galvan
Aarya Galvan
| Mar 17, 2021
I am very pleased with this product
5/5

It was perfect for what I needed. There is a small rail section that I need for a bi-fold door that I've got For some zeroing work, I'll use a tripod mount. The rail fits the M4 handguard on the Ruger Ar556 just fine. Normally I like an aluminum rail, but this polymer monorail is solid and very sturdy. Don't let anyone tell you that you need quad rails or handguards for the M4 handguard. This is what you need to know. This is much smaller, cheaper, and cleaner than it used to be.

Christina Juarez
Christina Juarez
| Jul 05, 2021

Related Products For Magpul MAG406-BLK MOE Polymer Rail Section, 5-Slot, Black