The following unique features make this unwinding function unique With a Speed X line winder, nothing is necessary to remove the reel and rewind the line by hand when you have too much line on the spool. You can wind the line directly back on the spool with ease and it increases the efficiency of winding.
The middle handle is made from aluminum and can be adjusted A plastic version of Speed X's spooling station features a connecting rod made from aluminum alloy, which is 40% stronger than its plastic counterpart. Also, you can adjust the length of the rod according to your needs, so it can be used in a wide variety of situations.
The clamp has been upgraded It is possible to open the clamp of the Speed X fishing line winder up to four ways. Thirteen inches/10 centimeters. The spool has a diameter of 49cm, which may be easily applied to a variety of sizes.
In the case of a conical adaptor Adapters of the conical design are suitable for spooling line through apertures of 0 and up. 0 to 39"/10 mm in 39"/10mm in 10mm This is 98''/25mm. By rotating the adaptor with the line spool when winding, the noise level of the winding is reduced, while the tension on the spool is maintained. Smooth and easy operation is made possible by this design.
Reels that are friendly to different types of reels A must-have for all fishermen, the Speed X reel winder is used for a number of reel types, such as baitcasters, spinning reels, spincast reels, etc.
Questions & Answers
During the arm clamping process, a spring was missing, so the tension required to hold the spool was eliminated. If it can be repaired, can it be done?
Hey, I found a video that shows you how to fix Here is a link that might be of assistance to
Does this work with a reel for fishing with a fly rod?
It would have been great to use it for rod fishing with a fly rod.
Is this device compatible with bulk spools? What is the largest spool it works with?
My experience is that it has worked just fine on a 1500 yard spool of Power Pro
Can you tell me a trick to keep the line from going all the way to the bottom of the spool rather than all the way ?
Removing the line from the spool completely is the best way to do it. The spool is removed from the reel, the height is adjusted by adding or removing shims or washers, the spool is replaced, and the drag is tightened. Lines should be reapplied and monitors should be inspected for correct line laying. If you do a search on YouTube for "uneven line lay", you should find the answer you need. Another factor to be considered is the condition and quality of the reel.
Selected User Reviews For Piscifun Speed X Fishing Line Spooler Machine with Unwinding Function - Fishing line Winder Spooler Fishing line Spooling Station Works with Spinning Reel, Cast Reel and Spincast Reel
Your trip will be a little bit more enjoyable if you maintain constant pressure on your spool
As I said earlier, I've been using the original line spooler for three years now and it's been flawless. In the past year or so, I have shown well over 200 people how well it does as well as how I have an edge over the other fishermen when it comes to line quality, lime wear, and consistency in casting. My performance and my fishing have greatly improved due to it. Then, if you use it correctly, you'll be able to use it. If you do not know what you are missing, you will be disappointed. Please feel free to contact me if you have any questions about this device or would like me to show you why it is a valuable addition My ideal version of a personal assistant would do each of these in a different case. Listening to its customers was a priority for the company. All the little accessories you might need from time to time are included as well. There is only one thing it lacks (so far) - battery operation for us lazier types.
| May 26, 2021
I really like this product
I recently purchased this device to prepare several reels for the spring fishing With a conventional reel, bait casting reel, spinning reel, and closed face reel it worked flawlessly. Up until now, I was always behind the times when it came to getting my line replaced because I had to take 3 trips to the shop or have someone hold the spool while I shot. In terms of unloading, this is a good concept, however, you have to anchor the front down to keep it steady. There is one thing I would change, however I would add a few hollow tubes/dowels that would slip easily over the long crank handle that is long wound in order to accommodate different yardage spool sizes. *This product is great - once you own it, you will wonder how you ever.
| Nov 09, 2020
I purchased this product in order to have something more stable to see if I can put on new line while preparing different spools to be used for different types of fishing
It is simple to use and useful when putting on a new line or removing an old one. Overall, the product does a solid job and is pretty intuitive to use once it's up and running. There were a couple of times where the spinning contraption would not spin completely, it would spin about 180 degrees back and forth, but mostly it would spin full 360 degrees when used for spinning. I wish the price was down for the overall product This felt a little flimsy to me, to the point that it may break or cause frustrating situations if you want to There was only one other issue I had at times when casting with the spin cast, and that is the line fall apart when the cast is made, and it needs to be redone if it is not retrieved and redone, the line will fall apart and cause havoc. As soon as I got it figured out through trial and error, it worked. In general, it is a good product but it will take some patience and some time to feel comfortable with it.
| Apr 11, 2021
They make spooling reels a breeze and can be used for both spinning and IBPS MCAS NCAS Spooling reels with the Piscifun Speed X Line Spooler is a much more convenient and smooth experience since it is what the gadget is supposed You no longer have to secure pencils and have a support person hold them The result is a very tight spool that is very easy to wind
The fact that I can spool any reel I need, no matter what size or type I am fishing, is appealing to me. Having the ability to pull line back off the reel and onto a roll comes in handy when you want to change the line or to save it for leader material. All in all, this is an excellent product with easy assembly and use.
| Dec 25, 2020
After you have learned how to use it, it is a good product
The packaging was very nice and the product looks great. Setting it up proved a little difficult at first, but after after reading the instructions several times I was able to spool a viper x reel. The company shipped it in quick time as well.
| Mar 25, 2021
The wide spools and large arbor holes make this a great choice
While it does not work well on spools 5/16 of an inch wide that have an arbor hole of 3/16 of an inch, it does work extremely well on spools 2 1/2 inches wide that have an arbor hole that is a bit larger. With spider wire stealth braids on a spool, it was a bit tough to keep the line on compared to lines on the 2 1/2 inch wide spools which went.
| May 22, 2021
Neither the quality of the packaging nor the precision are poor
We'll have to wait and see if it works. For easy storage and assembly, parts are packed with foam separated from each other. The parts are high quality and look like they will last for years. I expect that I will absolutely love using them. I have not used it on spinning reels yet, but I loaded up a couple of bait caster Although the tool rotating bail is abound with new fluorocarbon and good twist, it does not spin but rather rocks back and forth while the line is being loaded. The instructions instruct us to ". It should rotate when you turn it. Do not know if this will be a problem. Still not. The frustrating thing (not the tools fault) is that the line tends to unspool as you set up the reel after you load the line spool on the tool. The cord gets wrapped around the tool bail when that occurs, so you have to reassemble it. Tape the line spool until you are ready to load it with new line and keep it in place until you can crank the reel again.
| Jun 17, 2021
I find this tool to be extremely well designed and worth the price
In addition, it's very versatile, so it can handle pretty much anything you might need for respooling As far as I am aware, there is no competition. It has been used to wind line from a spinning reel back onto a holding spool so that I could transfer the line to another reel and it works very well. An amazing feature that allows me to reuse line from other spools which saves me so much time. As well as correcting incorrect spooling on spinning reels, it corrected a circumstance in which I used inconsistent tension on the line when I spooled and it did so well. As well as spooling bare reels, I also spooled them with this tool. The line spooler is quite well designed with great adjustability that lets you easily adjust the tension of the line. Typical aluminum and plastic materials are used to create this. There may be times when it seems flimsy, but so far I have not had any issue with durability.
| Nov 22, 2020