Inflatable Sport Boats Killer Whale 10.8' - Model SB-330-2021 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag

Inflatable Sport Boats Killer Whale 10.8' - Model SB-330-2021 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag

Name: Inflatable Sport Boats Killer Whale 10.8' - Model SB-330-2021 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag
Brand: Inflatable Sport Boats
SKU: 311
Price: 1,899.99 USD
Rating: 9.3 (51 reviews)

$ 1,899.99

Score By Feature

Based on 51 ratings

Sturdiness

9.68

Durability

9.73

Easy to assemble

8.71

Easy to inflate

6.36

OveReview Final Score

How Our Score Is Calculated

Product Description

By entering your model number, you can make sure that this fits.

Nautical engineers came up with the sleek white contoured design for rear buoyancy and faster takeoff planing. The extended rear pontoons and transom area of the "Easy Planing" allows for a higher maximum weight and larger motors while maintaining balanced stability. The 24 mm easy slide completely aluminum floor and seats are stronger, lighter, and more environmentally friendly than marine plywood, as well as being far easier to clean.

All seams are HEAT WELDED for a long life in fresh water, salt water, and high humidity. Problematic glue and nose cones are no longer used. The dense. UV, oil stain, and puncture resistance are all provided by the 9 mm, 1100 denier reinforced PVC material. The white material protects against the sun's heat, fades, and is comparable to the heavy duty material used in white water river rafts.

The item will be delivered in its entirety. 2 aluminum oars with lock-in holders / carry bag / 1* aluminum bench seat / removable seat cushion and bag ($50 value) 2018 Model Improvements: All dinghies can accommodate up to two adjustable sliding bench seats and two additional handles inside the rear pontoon for easy two-person transport.

MANUFACTURER IN CALIFORNIA SHIPPES THE SAME BUSINESS DAY. The USCG has given their approval. A Certificate of Origin from the manufacturer is included with the boat registration. Manufacturer's Limited Warranty is for three years. U. is a California-based company that designs and manufactures a variety of products. A foundation firm.

Model: SB-330 – Killer Whale 10 x 10 x 10 x 10 x 10 x 10 x 10 x 10 x 10 8'. 10'8'''''''''''''''''''''''''' Max Power: 15HP, Max Load: 1268 lbs, Max Persons: 5. Tube diameter: 18 in, Inflated width: 5 ft 3 in, Chambers: 3 1 keel, Max Power: 15HP, Max Load: 1268 lbs, Maximum Persons: 5. Tube diameter: 18 in, Inflated width: 5 ft 3 in, Chambers: 3 1 keel, Max Power: 15HP, Max The keel is inflatable, and the hull is V-shaped. 80 lbs; 44 x 24 x 11 inches; deflated boat in storage bag.

Questions & Answers

I'm looking for a cover for these boats, but I'm not sure where to find one. ?

Any dinghy cover that fits a length of 11 feet or 330 centimeters will suffice. On Amazon, you have a lot of choices.

What country does it come from?

China is my best guess. It's of excellent quality. In one of the chambers, there is a slow leak at a seam. I'm going to use a patch kit I bought online to seal it, but it's otherwise a great dingy. Aluminum floor that is really nice.

"9 mm 1100 denier thick pvc materials," your product description says. " That's all there is to it. The thickness is 35 inches. Is it possible that I made a blunder?

The substance is a. UV, oil stain, and puncture resistant reinforced PVC material with a thickness of 9 mm and a denier of 1100. White water rafting uses the same thickness of material.

When it comes to assembly, how long does it take? Is it feasible to assemble and disassemble on a regular basis? Take a long weekend trip to the Gulf of Mexico. ?

My husband put it together in about an hour. I wouldn't want to assemble and disassemble the floor boards on a regular basis because they are a little tricky.

Selected User Reviews For Inflatable Sport Boats Killer Whale 10.8' - Model SB-330-2021 Model - Aluminum Floor Premium Heat Welded Dinghy with Seat Bag

Love It

5/5

It didn't take long to set up. Before you put the aluminum floor down, make sure you don't overinflate it. It was purchased to be used as a dinghy on a 53' boat, and I added a 9. Mercury, 9 HP. It performs well and has a large carrying capacity, which I appreciate. There is only one seat, not two as shown in the photo. I'll order the second seat, but I wish I'd known about it sooner so I could have ordered it along with the boat. br>br>Recent changes: br>br> It's been 2 years since I've used it and I'm still very pleased with it. The number nine is used. With a 9-horsepower engine, it can reach a top speed of 19 miles per hour. With two people, the speed is 17 mph, and with three people, the speed is 15 mph. On a typical chop day, that is. You could gain 1 or 2 mph on a calmer day. When there are only one or two people, it is relatively easy to get on and stay on the plane; however, when there are three people, it is more difficult to get on and stay on the plane. It can take a 15 HP motor, which will probably not affect how quickly it gets on plane, but will likely improve the top end and make maintaining the plane with three people easier. In most cases, however, the HP on these boats is not maxed out. With a score of nine, I'm satisfied. Performance rating of 9 HP.

Matthias Dennis

| Oct 29, 2021

This is a fantastic small boat! This is the third sport boat-style inflatable I've owned, and it's been used as a tender and stored on the back of our Sundancer: I've had a Nissan hypalon 10' 2", a Zodiac 9' 4", and now this, which is by far my favorite because it planes out easier than the Nissan and MUCH easier than the Zodiac

5/5

It's a lot dryer on the water than either of the other two boats, even though they're both going through typical Lake Erie chop. The side stiffeners attach to the top ribs of the floor plate, rather than over the edge of three plywood sections, which made assembly a little easier. It's easy to control and ride. Overall, a fantastic little boat at an excellent price.

Corinne Carrillo

| Jul 13, 2021

Fine now! Now this is a fantastic vessel! With some sanding by my husband, the various parts that were badly machined fit after a few tries, and Amazon went out of their way to make sure we were happy

3/5

You should be aware that the aluminum floor connectors' ends were razor-sharp. sharp. We didn't want any perforations in the PVC pipe.

Muhammad McConnell

| Nov 29, 2021

This dinghy is fantastic! Over the years, we've owned a variety of dinghys [Avon, Zodiac, Walkers Bay, and so on]

5/5

We have an Inflatable Sports Killer Whale 10'8" that we love for its quality and design. This boat's designers obviously gave it a lot of thought. from the location of the carrying handles to the aluminum floor's quality to the heat-resistant material seams that have been welded It was simple to put together and take apart. With a 9, it planed up quickly. 8 Tohatsu, each with a 450-pound extra load. This is by far the best dinghy we've ever had. In addition, customer service has been extremely helpful. It's lovely.

Caiden WALLIS

| Aug 06, 2021

Very well-made inflatable boat that can be taken anywhere! I'd suggest it

5/5

This is a well-made item with well-welded seams and thick pvc material. I use this boat in 3 ft seas and it handles beautifully and is extremely stable! With a Tohatsu 9 and one person. I can reach speeds of up to 20 miles per hour when I'm in the number eight position. Overall, this is a well-made boat that is simple to fly and convenient to transport; I would recommend this inflatable boat to anyone.

Marlowe Perkins

| Apr 30, 2021

I've always had ridged inflatable boats (RIBs), but I needed a boat that I could pack up and take on the road

5/5

I decided to buy the 10,8 Killer Whale after conducting extensive research. I finally got to put it together and take it out on the water the other day, and I'm very pleased with the quality and handling of the boat. I had trouble installing the aluminum floor the first time because it was my first time, so I called the company and they emailed me a video on how to install the floor within 20 minutes. It has a 15 horsepower motor and can easily fly with two people. I'm so confident in this boat that I'm going to take it out on the ocean and everywhere else a RIB would go. After that, I'll post a follow-up.

Adelaide Andrews

| Dec 30, 2021

It's quite lovely

5/5

Before buying this inflatable, I did a lot of research. It's quite lovely. The unit is simple to put together. Welded seams were a selling point for me. A 10-ph 4-volt battery was used. That baby flew but felt extremely stable thanks to its four-stroke engine. However, because pumping it up takes a long time, I would recommend purchasing an electric pump.

Greta Yates

| May 17, 2021

a nice boat Because of the aluminum floor, the first time assembly took a long time

5/5

It is, however, much more durable and secure than an airfloor model once completed. It's simple to row, but it won't plane with my 4 horsepower outboard, which is to be expected. br>It has been holding the air very well after the first month here in Florida. br>I wish there was still room for the second seat.