Perko 9601DP Battery Disconnect Switch
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It would be best if you mounted it on a dry surface. Although covered, connections remain susceptible to water damage.
I estimate that it will take about 5 - 6 days The unit measures 6 inches in diameter, and has four mounting holes. The four holes can be used individually or in any number. A connection must be made to the wires at the back of the unit in order to mount the unit. Adding it to the transom of my boat in the battery compartment has worked quite well for me. I used 3/16" sheet metal screws and drilled a pilot hole before I installed the screws.
If that's what you want, then it should work fine. Probably you will need to install it under the hood of your car. In addition, you can test the system with a test light connected between the negative side of the battery and the negative cable, then pull fuses until you find your
The switch that is included here is all there is. It is necessary to install new boat wiring and that should be sized according to your existing boat wiring. A threaded post is used for terminals, so add-on cables need to be terminated with an appropriate size based on cable length.
Selected User Reviews For Perko 9601DP Battery Disconnect Switch
With this switch, I am preventing my battery from going flat between uses of my boat. I found the installation quick and easy, and my switch seems to be working well. After the boat was installed I did test it out on the trailer but haven't used it. Now it seems that the battery is holding. However, the SS screws did not come with the unit, so I cannot give it a 5 star rating.
The stereo on my old Grady White boat (1993) keeps draining the battery even when it is off. I recently installed a new JBL stereo on the boat and it keeps draining the battery even when it is The battery switch was installed and when the switch is turned off, the battery charge is no longer.
A pile of junk switched on my fifth wheel so I replaced it. With a product like this that is heavy duty and perfect for the task, you're not wasting your money, and you're getting something that will last a lifetime.
It is used in my RV to isolate the battery from the main power Since the TV and CO2 detector drain the battery, you must prevent it from being drained when the RV is not in use, so you should isolate the battery when parked.
This switch is for only a single circuit, if you haven't noticed it before.
Over the years, I have used a variety of Perko products. They have been reliable. Neither it is sheer nor wood, but why would it be so.
One of these was on my boat for 19 years, and then it started acting up, so I decided to replace it and hope it will be as reliable as the first. Bolted into place exactly where the old one was, it did not require any drilling to do so It is so easy to.
I've always used Perko products - they make great ones. I don't need to say anymore. I'm sure you've never heard of Perko, but I can tell you they make quality.