* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Weaver Thumbnut Spr 1

Weaver Thumbnut Spr 1" Mount

Weaver Thumbnut Spr 1
$ 47.19

Score By Feature

Based on 337 ratings
Sturdiness
9.30
Value for money
9.28
Light weight
8.31

OveReview Final Score

How Our Score Is Calculated

Product Description

A high level of quality is ensured by the materials used
A hunter's mount for hunting scopes
This Bushnell product is also of high quality
Bolts for turning leverage with thumb-nuts
How to measure the height and forward cantilever of rifles on the AR platform
The mounting bracket is designed with a low profile
A four-hole design makes the ring more gripping
An ultimate grip design that utilizes a cross-lock base

Questions & Answers

Do you know whether this mount is compatible with the Nikon P-mount Can you tell me what scope that is for the 223 BDC?

A Nikon P-400 is what I have The scope used in this mount is not compatible with the 223 3x32 BDC Carbine A short carbine scope cannot be mounted because the outer edges of the rings are too far apart. I had to return my mount, but it was a great mount.

Would anyone be able to determine the height between the center of the rings and the base of ?

The fifth "

Could you please tell me if this fits a Remington 760 Gamemaster? Could this mount be used only with a picatinny?

There is only one picatinny rail on the 760, but it will work if you can mount one on it. It would be impossible to attach the cheeks to the ears.

The Marlin 336 has factory drilled holes. Will this mount work with them?

Mounting is not possible because it is not drilled. There must be a Picatinny rail for it.

Selected User Reviews For Weaver Thumbnut Spr 1" Mount

The value you get for your money is good
5/5

A dozen scopes cost more than my scopes, and several come with mounts that cost the same or more. Although the price went up on these products, I still use them on everything I do Here's a list of things you should know about the Beat Controller One PC. Money can't buy you a better scope mount than this one in 30mm and 1". There is no need to spend $150. A range of $00 to $500. When these are available for under $60, it makes no sense to spend $00 for scope mounts. This will do the job just fine. Not only are cross bolts included, but a cross cleat recoil lug is included, as well. For any weapon based on the AR platform, these will be suitable. It's just a matter of setting the torque properly. The diameter of this tube is 25 inches. Weight is lb. You can use rings for that. In addition to thumb screws, there are only 50 pounds of force required for them. In the screw driver slot, I always use my fingers as tight as I can and then a dime or a penny for a nudge. Make sure you mark where the scope slots are so that you can put it back in the same place when you change With my one AR in 308, I use the DPMS ("mil spec" platform). I swap out one of the axes for one of the others There is a 6-point difference and a 4-point difference There is never any disagreement about nearly dead on and they always go back to it. There will no longer be an AD recon fee of It would be great if you could mount a 00QD scope By the time you've bought two of those, you'll be able to get a nice third Take a moment to consider this. Also, a tiny bit of blue loctite on the first couple threads of ring screws is a good idea. Please do not go bonkers. Shake it just a little bit to ensure it is well mixed.

Shepard Johnston
Shepard Johnston
| Jun 02, 2021
That's a good read
5/5

You can get frustrated when you bring your gun to the range, sight it in just right, and then when you return to the range, it is off. When does that happen? Why does it happen? In order to maintain zero, the scope of your work needs to be good If you have a good scope, but the destruction of zero still occurs, what should you do? Take a moment to think about You can attach a scope to your gun by attaching your scope to the mount. Of course, it's the middleman who often gets forgotten. I have owned, and I still own, good quality guns and scopes, but I have always been frustrated with zero creep from one shoot to the next. In order to make sure the mount was as solid as the other components in the chain, I chose the following You can read more about the gun and scope here. One can only be as strong as the weakest link in a system. Thank you for taking the time to do so. The range was a great place to zero my scope, so I took it home after zeroing it. As the gun was bumped around, it went from hot to cold, from humid to dry, and when it came back, it was hot Despite my full expectation of having to adjust it in one way or another, I remember going back to the range and finding that it was close to being perfect. The game is over. Amazingly, I was at a loss for words. As a result of a few more tests on the mount, I have taken the gun back to the range. Intentionally bumping the gun to gauge at which threshold the zero would be knocked off-center, I was even rougher with the gun than usual. The game is over. On the range, I pounded the scope and gun with the palm of my hand to test their grip on the gun and scope despite not having been told to do so. This is a dead end. The zero has taken up residence in its cozy spot of accuracy, and I have tried my hardest not to disturb it. It is best to buy the mount, or if this one isn't available, another that is more expensive due to its size and weight As a result there are often correlations between quality and price. This mount, however, has unique features that are not found in some other mounts of comparable value. As a result, I use this mount on my Without a secondary backup iron sight on an AR, it isn't complete. In this mount, the rise allows for the rear iron sight (magpul) to sit comfortably beneath it without giving it so much space that you have to charge it rent for the space it takes. As a conclusion, this mounting system is durable enough to ensure that if the scope falls out of zero, the scope needs to be evaluated. In addition, it has the height necessary to accommodate an iron sight beneath it. Regardless of whether you intend to mount your scope with an accessory, the mount might be too tall for you if you don't plan to add one. Thanks a lot!.

Bianca Dudley
Bianca Dudley
| Apr 09, 2021
I like the design that adapts well to AR, but I have to regret that I like the way it looks and it seems to be high-quality
4/5

It helps you clear the charging handle on ARs, and it can be made to work with other rifles with obstacles you must get over. Additionally, it pushes the scope a bit forward, which is usually beneficial. The only complaint I have is that when I bought a Weaver product, I wasn't expecting it to be manufactured in China. I would have been happy to pay a lot more to get a product made in the US. A lesson has been learned (learnt).

Yaretzi Lindsey
Yaretzi Lindsey
| Dec 01, 2020
Very nice mount, and it's pretty too
5/5

My AR got a Vortex scope for it, so I purchased it. Purchased some Vortex rings with a mid-rise look. Rings do not have enough clearance. As I was looking around, I found these to be decently reviewed, they appeared to be quality equipment, and they were well We ordered them in, and I got my scope mounted, and it looks really nice. Although I think I went a bit beyond the scope of this project, what's the point if we can't enjoy ourselves some? There was no struggle mounting this mount, it adjusts and tightens down properly, it allows for the scope to be perfectly positioned so that the proper eye relief is provided, and it looks nice. I can't wait to get out on a range.

John McCoy
John McCoy
| Dec 05, 2020
I am a weaver, but I am not a It is easy for me to be My old scope needed to be mounted on a weaver mount
5/5

My search on Amazon lead me to this book and I purchased realized it's not an AK47 mount, but a Picatinny one. There is a company and a seller called "Weaver", but it In order to use my Picatinny/Weaver, I had to purchase The scope mount is extremely high quality, for the price. I wondered why this wasn't less expensive than a "Waever" scope mount. This is what I've been searching for. These mounts seem to be as good as the more expensive ones I have on my AR-type rifle There are two types of rifles 15s and AR-15s As a result of my inattentiveness, I will not dock any stars. Those who want to mount woven screens should be careful not to make the same mistake I made.

Sloan Griffin
Sloan Griffin
| Apr 03, 2021
This has been a good start
5/5

I've been using two of these so far, and they seem to be working fine. As a back up, I always leave my iron sights on all of my rifles, and this mount sits about an eighth to a quarter of an inch higher than say a Warne mount, so you get clearance for Magpul backup sights on a flat top There is also a Warne mount for me, but it only just clears. Since the scope's tubes are limited, the rings on this mount are closer to each other than on the Warne, so that was an important feature for mounting the 2 In my case, I always keep zeroed back up irons on my rifles and I use blue locktite on all mounts, including mounting nuts and caps, and I have on hand a way to remove mounting hardware in case I need to.

Kai Ochoa
Kai Ochoa
| Oct 12, 2020

Related Products For Weaver Thumbnut Spr 1" Mount