HIVIZ Walther P22 Frnt Sight Intrchg
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As you mentioned, it works great with the thread adapters and it also works great with the suppressor. The Silincerco Company It also includes the adapter and the cable I bet you'll enjoy Silencerco's Spectre II . The tools are included and the process is very simple.
As listed in the description, this item has 6 stars.
I'm not sure. About 2 years ago, I set it up and threw away the excess.
Selected User Reviews For HIVIZ Walther P22 Frnt Sight Intrchg
Describe the period. Replace the front sight post on the Walther P22 with this excellent portion. Compared to the cheap and easily knocked out factory sight, this sight is far more stable. From underneath the slide, a set screw is holding the slide firmly in place. Simply dab a bit of locktite on it, and you're good to go. The Walther P22 had been in my bag while trapping predators and at some point the front sight came off while drawing. There were three guns included with this pistol, and all three had this problem. There is no way to hold the factory sight, which is simply pressed in and held firmly with pressure. HIVIZ sight posts are made of durable solid metal with interchangeable fiber optic posts available in three colors (green, red, and white). Each color comes with two pieces. Since it is easy to see and makes quick, accurate shots a breeze, it is likely never to leave the pistol. P22 Walthers will not be complete without this tool. Please note *br*br*- It's been updated.
In order to thread the screw into the barrel, it needs to be threaded in from under the sight, but the sight blocks access to the compensator alignment screw. Moreover, it is not possible to install the alignment screw before installing the front sight post screw, because the barrel then blocks access to the This will mount in the same place as the front sight post on the standard model, and you will be able to cover the compensation sight post hole with the plastic piece. The sight works fine even though the screw did not back out perfectly. I would recommend using some medium thread locker just to make sure that the screw will not come loose. Comes with 2 green, 2 red, and 1 white optic, but a bit more variety would be nice. I guess if one falls out, you can replace it, however that seems unlikely since they are held in place tightly. While the red looks more attractive, I have found the green to be more practical when aiming at targets with orange circles. The p21 front sight is a fantastic replacement for the dreadful front sight that came with the P22 (and looks to be compatible with the newer ppq slide), and at only $26, it makes sense to get one. Certainly it is a relatively cheap pistol, but Walther, you've really got to show some pride here. With those sights, what was your thinking? Buy these and you will be glad you did.
You should be able to pop out the original front sight fairly easily. If you are going to attach the sight to the slide after attempting to screw it in, I recommend using a piece of blue painters tape to secure it. It was difficult for me to figure out how to apply the lock It was easy to apply a small amount of sealant to the bottom of the sight, so I just used a drop. You'll have to fiddle around with the screw a little to get it Nevertheless, once you get it tight, it is fairly easy to tighten. In order to clean up all of the lock-on residue, I had to pop out the lightpipe as well. The spring should not freeze if you have not tied it. Luckily, it's not too difficult, just a little bit It remains to be seen if the sight is accurate or not.
I am amazed at how well this kit works. There is no need to go look for an Allen Wrench or Hex Key during installation since it comes with A Walther P22 would have been perfect for this, but I ended up putting it on a PPQ instead. There is a statement on the package that says it will also fit the P99 series. In the kit are selections of colors, including yellow, white, and green. Mine came with the red fiber installed, but there is a choice of colors in the kit as well. As part of the kit, you'll find a small tool to help swap out the fibers, as well as a drum style container to keep them all in. Excellent visibility is provided by fiber optics. For this series of pistols, I have ordered two front sights from HiViz, and this model will be the most suitable one. I think it is a fantastic value for Please note
W. Bill K.
The kit comes with extra plastic fiber optic rods, as well as a holder and an allen key for installation. Installing the retention screw is a bit tricky since you have to put it where the retention bolt goes. To make sure the bolt does not back out and drop into the frame, I would also recommend a small amount of locktite. There is friction between the original sight and the replica. The bolt holds this one in place, and without it, the bolt will fall out.
I am unable to use this for In my slide, there is a groove cut inside at the front sight that is not deep enough for the screw to go in far enough to secure it. Beware of the groove in the slide at the front sight of the slide. If this groove is present, the sight will not function. The sight needs to be secured with a toggle type spacer that fits into the groove.
The installation process is pretty straightforward. First put the screw in, then screw on the new sight. Once you have the sight threaded on the barrel, center it on the barrel and tighten it up from inside the slide with the supplied wrench. Some blue loctite makes it easier to see than the stock This camera does an excellent job of picking up ambient light. While nighttime is the best time, there is not much to do. Contains 3 green, 2 red, and 1 white light tube, as well as a small tool and keychain. My experience indicates it performs significantly better than the stock sight and has led to a substantial increase in accuracy with my P22.
The front sight is definitely an improvement over the factory one. In any case, no matter whether you use the light pipes or use the white stick, the front sight will not fall off, as it does with I found the installation to be quite simple, straightforward, and The blue locator beacon should not be forgotten This is a great lighting scheme that has a simple to swap light pipe and seems to gather enough light to really capture your attention. Furthermore, the sight doesn't interfere with the use of your pistol if it is holstered. One reason for giving it a 4 star rating is that for that amount of money, there could be another screw included The best pipe that would be nice would be one that glows in the dark. In addition to being the white stick, it could be used as a tool.