HIBLOW HP-80 Pond Aerator/ Septic Linear Air Pump
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If I were you, I would cover it with a cover that does not have to be completely sealed but is sufficient
The manufacturer can be found by Googling
There was no clear indication if this was for aeration or winterization, but nonetheless, the HP-450 can be put to good use I would recommend the HP- 20 since it would be more than enough, but you could use the HP- 30 The HP-series is the only size I would go above Greetings from Nate at Practical Garden Ponds, 494-6843 Amount 356
In brief, yes. This device comes with a standard plug, so it can be plugged into Nate at Practical Garden Ponds. Our sincere thanks and best wishes.
Selected User Reviews For HIBLOW HP-80 Pond Aerator/ Septic Linear Air Pump
Then and now My pond is aerated by this pump. It feels sturdy and substantial because it's made of metal. While this pump is not the cheapest you can get, my research indicates that it is one of the most durable. Although you can hear it running when it is within thirty feet or so of you, it is not loud. Aerator and 50 feet of weighted hose were ordered in addition to this product. There will be no problem fitting the 3/8 hose into the connector provided with the pump, but I recommend that you secure it with a hose clamp first. Despite receiving the pump with a spring clamp, it appeared to be too loose for it to be of much use. In contrast to other aerators, it had no modifications necessary on the other end to fit over the Rootscape aerator. Just under $400 plus 2 hose clamps was the cost of the whole rig. You can see an example video of how many bubbles were In the area where the bubbles are visible, the pond is 30 feet wide and 5 feet deep. A 100-foot section of it is in the water. It was impossible for me to hear the pump from where I recorded It may not be sufficient aeration for my pond, but I hope it is.
It looks like cream of broccoli soup once September arrives in our 75' round pond, so I am trying to find aeration kits for it. These small electric motors and this ring (U. S. Mounts solar panels on ponds and water features With a stainless steel base, the lake air diffuser adds aeration to the lake. 36 inches of high-density polyethylene An Aeration Tube with Maximum Efficiency! This is the diffuser for the pond. This product is made in the United States! some tubing, and some clamps and put together my own kit and saved some money. For my workshop, I installed a shelf for it and put it on a timer (Fosmon C-1000 This Outdoor 15A 24-volt power supply is designed for outdoor use Three timers, one hour, two hours and three hours The outlet is ETL-listed for water resistance and has a heavy-duty ground cord with a 7-inch length. That's all right. For all of this, it took all of an hour and a half.
This is a 6 amp power supply. My research into blowers led me to find inconsistent amps listed on a few sites. Testing for my Hiblow HP80 resulted in a rating of 0. 7, which was a little below the label's rating The power draw is 6 amps when the voltage is Knowing this will help you determine the proper wire size for the length of the electric line that you intend to run. */End The blower has served us continuously for four months without causing any problems.
Because the exchange cost was half what a company would charge for a new one, I went with this. The wiring had to be spliced together after I cut the plug off on my system. It's really easy, just match the colors on the chart or watch the video on Several months have passed since that system has worked perfectly. It would be cheaper to replace the system every year rather than to hire someone to come out and do it.
It is quiet. It has been thirteen years since my home was built, and I still have the original Thomas 5078 septic aerator pump in use. Although it still worked, I knew it was approaching the end of its life so I decided to replace it before it caught us off guard. So I ordered this HP-compatible laptop. A match to the original specs was found in the 80 (pictured). A simple installation process takes only a few minutes. There were two hose connections that could be easily connected without any tools. During the installation of the alarm sample hose and the regular supply hose, we just connected the hoses. The pump on my pump operates 24 hours a day This new pump had to be wired in the correct way so that the old pump worked exactly like it had. Because I cut the electrical plug, I had to wire the three wires into the correct positions in the control box. No problem at all. It took about 30 minutes to complete the project. it's just a matter of seeing how long this one lasts. For your information There were 244 new units in this neighborhood. When I purchased it, I paid 00 on Amaozn. There's no doubt that prices change quite a bit. The price of $244 is tempting, but be careful if you pay that. By Jan 2020, that number will be $10. 00. From October 2020 to October 2021, it will cost I hate that!
* I do notice that it has a slightly different compressor tone (more metallic in sound) and I would consider it to be slightly louder than the Thomas 5078, but it is *additional information*additional information There will be a May 23, 2021 date. It is still running well. The issue has been resolved.
In addition to replacing the Delta DF60 ATU (600 GPD), I purchased this pump to replace the Model D80 pump (5 years old). A Delta model LH-D80 branded by Thomas is actually a Delta model D80 This is 80HNL. This is what I found out when I disassembled it. The failed pump could not be fixed as both the diaphragm and the magnetic shuttle had failed/broken. Although I was able to obtain the diaphragms, I was unable to acquire the magnetic shuttle (just my bad luck). In spite of the fact that the performance curves of the pumps are different, all of the septic websites and Delta recommended the HiBlow 80. The pump I purchased may not be as powerful as I expected. There are two components needed for the Delta DF60 ATU, according to Deltas literature. This means that 19 CFM (62 l/min) is being produced. HP - If the performance curve is 80, a 2 should be set as the pressure. The flow rate was 80 litres per minute at a PSIG of 13. It may be necessary for me to take some pressure measurements to ensure I am getting the minimum flow rate to the ATU per the performance chart.
The pump arrived in good condition at the stated time and hook up was simple (plug in There is, however, a lot of noise from this pump. There is more of a pitch difference than the Getting used to it may just be a matter of time. The ATU seems to work, since I can hear bubbles forming inside. Based on HP-related data In recent years, the 80 has run about as warm as the D80 has always run. The fact that rebuild kits are readily available is a plus for me. The loudness of the music deducted two stars. Then seven - The 2020 update is as follows Diaphragms for the pump have failed, and I will order new ones. The time I got out of this one was not as I had anticipated. On disassembling the pump, it appeared to be in good condition despite a service life of less than three years. My air conditioner is located in my basement, and I change the filter at least every six.
One of the diaphragms blew out after 16 months of daily use. This is an update after a little over a year. It is not cheap to purchase a standard repair kit. Having now replaced it, I have finally figured out why the original was bad. It is now my practice to keep two, rebuild the one that constantly breaks, and then put it on a shelf until the other one breaks as well. Before purchasing, he should have researched the longevity of the product. In the beginning of the year, I bought the exact same pump that was in the house when I bought it originally. My installed pump is only 2 years old, it had not worked for a year, but I simply replaced like with like because I am new to this type of septic system. It works perfectly, but it is very noisy, and I can hear it inside the house through the It will be interesting to see how long it lasts.