The following items are included within the package Two cable extension adapters with eight mounting screws for SAE connectors. Wire is made of heavy duty 12AWG copper wire, which is about as thick as you can get. The cable is 4 meters in length. A 33 cm/13 inch socket (including SAE).
A standard SAE quick release connection is available. Compatible with most of SAE ports. Can be installed on a bulkhead or panel as a weatherproof power point for SAE.
An application that can be applied to nearly anything The battery packs on different vehicles can be connected or disconnected quickly. The products can be used in several different applications such as motorcycles, lawn motors, tractors, boats, marine trolling motor bikes, RVs, and DIY.
The dustproof and watertight cap keeps you safe from the elements. While not in use, the SAE connector is protected against rain and dust with the protective cap and remains dry and clean.
Cables of the highest quality for SAE connectors You can contact us with any problems with the SAE plug socket cable if you are not satisfied with the purchase. We will always be available to assist you if you need us.
Questions & Answers
In order to install the device, what is the minimum hole diameter?
Simply measure the size of a drill bit, this will give you an idea of what you are looking for. Always start out small to avoid making a larger hole. When I was riding my motorcycle, I used a paddle bit!
Can anyone tell me if they had any issues with contact or intermittency developing?
It does not matter whether wet or not
Is there a connector that I should use to plug this in? It is my plan to connect my boat's two batteries to my onboard battery charger. ?
You can get a sae connector with a fuse from Tetra Teknica, check it out on their website. I have one on my motorcycle and it works great.
Selected User Reviews For SAE Connector, Electop Solar Weatherproof SAE Socket Sidewall Port, SAE Cable Quick Connect Panel Mount Universal Flush-Mountable Connector for Solar Generator Battery Charger with 8 Screws(2 Pack)
In terms of polarity, the port is exactly right
If you give a bad review, you can state that the polarity is reversed, but I think this may be The coated female pole in these jacks was designed to act as a power port (output). The red, positive cable is supposed to terminate there. It will be useful for those of us connecting solar panels to controllers by using this input as a power source Color polarity would be reversed, but that was not the intent of this product. A simple and safe solution is to nip the cables at the jacks and then solder and heat shrink the other cable to create the correct color coding for the input jacks. I found it to be very useful and of good quality.
| Aug 10, 2020
On the ones I received, the wires were backwards
Several of the plug/receptacles were reversed on the red/black combination. If you connected a connector to the wrong pin (red to black, black to red), it would be wrong. I could have fixed it by just swapping the battery connection, but dealing with it was not so easy. The only way to avoid any confusion in the future was to use colored heat shrink for any changes in wire colors.
| May 26, 2021
The set of cables is very easy to install, but you must be careful if using two plugs
I got this set to power a solar panel through a SAE cable on an RV. Apparently I didn't pay attention and the terminals are the same for both sides of the plug, which means when you plug in one, it is red/red, but on the other end, you can only plug in black/red. My mistake was that I should have paid more attention since there were no warnings. The weatherproof caps are tightly fit and easy to put on. I installed these immediately as soon as I figured out the switching process for my RV battery box and they work perfectly!.
| Aug 22, 2020
It's all about the quality
The set comes with eight screws and is a two-piece set. is not rigid, but it has some flex, yet it is thick enough to be somewhat reliable in screwing, with the ability to mold to whatever it is attached to. Electric pixies will also enjoy the thick wiring, 12 AWG, so the high amp bullet train is safe. There is a jimping or grip along the sides of the dust cap, which helps seal the lid well. Since the pre-tinned leads indicate that the cable is copper, I'm unsure if it is. I've installed it without any trouble and have been impressed with how well it works so far. If you need a weatherproof sae power connector with 12AWG, I highly recommend this product.
| Oct 29, 2020
I've been told it's tinned copper wire
someone said aluminum wire, but I think It is not aluminum if you can solder it. It is easy to install in battery boxes. As I did not want the points of the included screws to be visible inside the box, I used different screws.
| May 22, 2021
A very high quality product
I used the sockets throughout my workshop to power a portable entertainment system that runs on 24VDC. It's simple to install, a 7/8" hole is all you need to make them Even in environments that are frequently dirty and dirty and heavy-use, these remain clean and free from dust and debris. I will definitely need enough current to run everything I will need off of 12 gauge wire.
| Jan 15, 2021
It takes as much time and effort as it does to pass through my trailer to supply 12v and I feel like I've passed through perfectly. This is a very professional service. It is possible to run longer with less degradation when you use a larger wire. I particularly like the snug fit of the socket. What's the deal with the water? I guess we will have to wait and In order to guarantee that the terminal remains conductive, I will spray it with corrosion protection so it will remain conductive with no chance of corrosion. On the whole, I think the product and I are about to begin a great Buying it is a good idea.
The connections are quick and easy to disconnect
It was purchased for wiring up the lights on my roof rack into the bed of my pickup truck, along with the necessary cabling. A hole was drilled within the bed, and the slats were installed for a professional appearance. the task of removing the truck topper a lot easier because the rack lights can be disconnected without having to connect them. If you're in need of a quick connect, and a quick disconnect, I highly recommend this.
| Feb 19, 2021