Rain Bird XFD0912250 XF On Surface Dripline Hose Drip Irrigation Dual Layered Tubing Coil with 0. GPH and 12 Inch Spacing, 250 Feet, Brown
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In short, yes.
The line was buried about an inch into the ground, since if it are buried deeper, the holes where water comes from may be blocked up.
The answer is yes. Using the Rainbird 136 Adapter 1/2" MPT x 1/2" Barb connected to a 1/2" female X11/2" female elbow, I achieved the desired results. Several different brands of barbs were sold to me, but they were too small and would not stay on the tubing. Set the cruise control to a low speed Rotate the knob on the valves to open and close It took me a while to realize the auto-fill wasn't working at the start There was a problem with a converted drip valve that would not turn off when there was Your set times should be increased if you want enough water to reach A drip system and sprinkler system cannot be set on the same valve or valve set. Several sprinkler risers have been blocked with caps as there is a good deal of drip hose area that can be covered. Hope it works out for you.
As I have a 40 lb. regulator and a manual valve going into each of my three garden segments, it seems reasonable as I have to reduce the volume of water going in to each of them
Selected User Reviews For Rain Bird XFD0912250 XF On Surface Dripline Hose Drip Irrigation Dual Layered Tubing Coil with 0. GPH and 12 Inch Spacing, 250 Feet, Brown
The Rain Bird is well made and has 13 stations and 78 heads. I've used them for 8 years now and haven't had any problems.
I like how it works. You don't want to give too much space between them, however. Remember to space those drip lines properly!.
We are in love with Getting the filter required proved to be difficult.
I use it all the time in my landscaping business. I would highly recommend it!.
This is better than dig drip by far.
My experience is that it works very well in very warm temperatures. I have been using it for two summers now, and it hasn't let me down. In the case of any bend greater than a 6 o'clock there will be kinking With an 8 inch radius, this mat usually tends to stay put and not move.