Orbit Sprinkler System 1-Inch NPT Jar Top Valve 57461
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A 24 AC volt valve like this is designed to work Having said that, I am yet to test the valve with a low voltage of 12 volts, since that would not be able to operate it
The product I bought did not come with a warranty at the time of purchase. More to the point, though why would it do so? The model with 3/4" female connectors (for example, Orbit 57460, 57280, 57100) should be used if you need to connect the model to 3/4" pipe (also otherwise similar).
If you want it mounted upside down, or from any angle, you can do that In order for a solenoid to function, gravity plays no role.
The valve is powered by a 24 Volts solénium battery.
Selected User Reviews For Orbit Sprinkler System 1-Inch NPT Jar Top Valve 57461
At first, I was concerned about flow restriction, but soon found that the problem did not exist. Please re-read This is a phrase that makes me a great deal concerned. I applied 24 volts to the solenoid and was able to hear and feel the solenoid engage. Because I was unfamiliar with a water valve powered by electricity, I assumed it was in the closed position, but I was still unable to blow past it. Anyway, after purchasing a second one that was basically the same, I had the same experience, it refused to open enough to Here is a short story about how I made a little 3/4" water hose hook from a 3/4" adapter- Whenever the water pressure goes up, it seems to open completely, so it's like when you apply voltage to the solenoid you unlock the valve, then when you apply a certain amount of water pressure, it'll open The container I used when stating fully is what I use in determining how fully I am. The solenoid valve took 17 seconds to fill the container using the hose, but when I took it off and ran the fluid out through the straight hose, the time remained 17. The second one I bought was just to make sure it would work with a ground coupled heat pump after the first was installed. It has not been a problem so far with either of them.
Originally I purchased these to replace the valves, but upon getting them, I noticed that they were shorter in length than the ones I was replacing that in turn were Orbits. You should be aware that these are shorter and so can be more difficult to replace.
The rocket launcher is very well made. I bought it to make a homemade air-powered rocket launcher for my kids and myself. The program works well. In our tests we tested it up to 60 PSI, and it held just fine, however we usually operate it at a pressure of 20 PSI. Despite having been launched nearly 500 times, it remains in good shape.
This version is slightly smaller than the Orbit valve I replaced, but that is the only complaint I have. It was difficult for the plumbing contractor who installed the previous valve to connect the piping as he left no slack, so it took some time. Once plugging it in, it worked properly.
The exact replacement for one that leaked. I haven't been able to disassemble the old one so I can see why it leaked, but hopefully this one will last as long as the old one.
The old one failed after a long time, and thanks to your superb website I was able to order a new one within 2 days and it was delivered quickly.
A friend of mine bought this for me to use in a project I am working on to open and close It's a great tool.
This is a superb piece of manufacture. It is an easy tool to modify for use as an immediate-response The release valve can be used for creating backyard ballistics projects.