Rapco Horizon LTI-1 Stereo Laptop Interface Box
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is only one possible reason that would cause this (mirror image), if the stereo tracks were recorded with one channel 180 degrees out of phase. The only time I have seen this before is when amateur video producers use XLR-type connectors They are trying to record dialog with their video camera by connecting a mic to a 1/8" adapter, but they are using the wrong type of adapter. The stereo mic inputs of most camcorders are designed for singular microphones, so you'll need a mono 1/8 adapter to use the stereo inputs. In the case of using the balanced "stereo" adapter, the channels on the right and left cancel each other
That's exactly what I do with it. An output from a board is connected to a mic jack on the Sling Studio Hub.
A digital recorder can be very helpful. One of the best is made by Sony.
The LTIBLOX interface is intended for consumers to professionals. In other words, it transforms the output of consumer electronics (laptop computers, MP3 players, CD players) to a mic level balanced signal. The volume control of the stereo signal can be adjusted by the operator. A male XLR output is connected to a male 5mm input. Devices such as this do not require voltage to operate.
Selected User Reviews For Rapco Horizon LTI-1 Stereo Laptop Interface Box
As a professional audio guy, I work with all kinds of audio equipment. This is an instrument I use all the time when I am doing A/V work. As well as other items from the same manufacturer, I own other similar items. An adapter such as this one can easily connect a PC computer, iPod, iPad or similar device to a pro audio sound system, and it works like a charm. A good company here in the US makes quality products under the Rapco Horizon brand. The other model with ground lift switch that Rapco makes is listed below. I think it's a nice feature to have, but after flipping this ground lift switch to get rid of the noise, I usually find myself flipping it back again. As an electrician and electronics specialist, I'm better suited for your business. Instead of spending the extra money on the ground lift switch, I just have been buying this Rapco model without the ground lift switch and disabling the ground wire from pin 1 of the XLR connector, which the ground lift switch would have been located on, and permanently leaving the ground lifted. Also removed was the potentiometer "volume control knob" on my PC DI's since they would usually add confusion to the presenter when they encounter a problem with the sound and are trying to troubleshoot it without a sound technician present to guide them. It's good to set the audio output level of the laptop to 75 percent, then adjust the input volume and gain of the mix. It tends to work pretty well and leaves some wiggle room for the presenter to adjust the volume on the PC as well. These are also products of the same type that are great to use.
My favorite power supply for laptops and devices of this size is this little DI. There is a volume control that is really useful for presentations where all the sound cues or video footage are of varying volumes. Because the presenter can anticipate drops and spikes in volume and adjust the potentiometer as needed, it is easy for them to use. It is a decent length so that you are able to position it in different ways. There is no jerking when the volume pot moves. It was only the nut on the volume knob that I had to tighten on this box. During the years, it seemed to have come loose somehow. Although it was quick and simple to open it and secure it, it was also just as easy to In the past, I have always had the feeling that the right angle neutrik jack would bend or break so easily sticking straight out of the device. This being the second one that I have bought, and I noticed that the newest are slightly longer. There is only a fraction of an inch of extra length, which doesn't change the compactness. In the past, the only time I had issues with the audio were when I left the device in my car during hot weather. It became apparent that the potentiometer had become oxidized after being used for a while. When you used it and exercised the pot, it cleared up the In addition, I have one of these devices mounted on my Hercules iPad holder to use as a DM for my iPad during My velcro straps allowed it to fit perfectly, so I secured it. It would be useful as it would let me have some control over volume without using the buttons on the iPad, which can be difficult to use, and it would allow me to move the mic stand around easily without dragging a DI around.
Despite the fact that I am an audio technician, I usually keep this in my kit in case my laptop needs to be connected Combined with a quality pot, this works very well as a volume and ground lift tool. During testing of the unit, phantom power is turned on for mic input and a transformer is included that will isolate your device and protect it if this is done.
I love this product. It works as I was expecting it to. The build quality is great, but if you are getting this one, make sure to When AC power is applied to the connected device, it causes ground hum. There are laptops. The battery doesn't work with cell phones or other battery-operated objects. It doesn't have anything to do with the adapter, it has to do with how electricity works. If you already have and do not need the other one, it's better to not need it than to be in my shoes and wish you had it.
Using the box, you can record a stereo signal at line or headphone level and output it at an isolated, balanced mono level at microphone The presenter can adjust the volume with the convenient knob instead of fiddling with menus when the device is plugged into a laptop. The purchase of this product should have been done earlier. *I like I like the sturdy box with the large volume knob and the short, attached cable that's just the right length for most situations*I like the audio quality for MP3 playback and video playback as well. A dislike for While it's not bad for a "mic" cd, the output level is still painfully low This signal is at the highest level. Inputs with low quality mics have a difficult time cranking up the level without adding a lot of noise. A slight decrease in transformer ratio would greatly improve the situation. This tool can be difficult to stick in a toolbag pocket due to the knob on top. The ease of use is also a benefit. There is no such thing as a twofer. It does not indicate the volume's maximum or minimum. There really isn't much difference in the majority of cases. All you have to do is know what works best for you. It is easy to add some marks with a silver Sharpie.
The first one failed after a year or two, creating a very low level of sound with a lot of hiss/static on top of it. I have not encountered any problems with this second one after several months. You won't need to look down at your electronic device volume controls for volume adjustment since it's very easy to adjust the volume with the volume knob. This electronic device is very useful in my application since it allows me to mix different volumes of audio into a video clip.