* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
HAPPIJAC Qwik-Load(R) Turnbuckles HAPPIJAC Qwik-Load(R) Turnbuckles HAPPIJAC Qwik-Load(R) Turnbuckles

HAPPIJAC Qwik-Load(R) Turnbuckles

HAPPIJAC Qwik-Load(R) Turnbuckles HAPPIJAC Qwik-Load(R) Turnbuckles HAPPIJAC Qwik-Load(R) Turnbuckles
$ 316.17

Score By Feature

Based on 116 ratings
Packaging
8.47
Customer service
8.41
Value for money
8.70
Satisfaction
8.88

OveReview Final Score

How Our Score Is Calculated

Product Description

The Happijac Quik-Lock - Turnbuckle set in stainless steel for loading
You can now load and unload your camper quicker and easier than ever before with the Qwik-Load system The lever is actuated by a fluid pressure With these Turnbuckles from Happijac it is almost impossible to die
The levers on these tools are strong and durable Installation of action turnbuckles is quick and easy
To adjust the tension, the turnbuckle does not need to be removed
The stainless steel barrel and the comfortable, removable handle are designed for easy storage and portability

Questions & Answers

In what way does the warranty work?

Due to the fact that I bought mine used, I do not know. I like them a lot,

How can I attach this to a 20 16 ram 3500 and a 2019 mammoth by host using forklift tie-downs?

In my previous work I've installed frame mount tiedowns on a 3500 Chevy truck and it seems to work well, and the quick on/off feature I like as well.

Could you please tell me where I can buy just two?

I do not want to receive it

Selected User Reviews For HAPPIJAC Qwik-Load(R) Turnbuckles

I think these camper tie downs are a good buy for the price
5/5

They look well-made and durable. Chrome and stainless steel should last for many In the bottom of each cylinder, there is a long threaded section-maybe an inch long. The nut is welded on, not just used as a fastener. You might be able to extend their lives by applying a dab of lube such as silicone spray. Make sure you turn the handles enough so they pull the latch snugly, but not so far that they end up bending! It's recommended that you do not screw the handles into place, but rather that you leave one or two in your door pocket and the rest in your toolbox. It may be necessary to flip the handle for full release of the tie down when it is used. Depending on the camper system and the truck system, it could vary. In addition to the heavy chain with a hook at the bottom, I installed forward tie downs as well. My Happijac is too long for the rear of the bike, as I was unable to thread it as it was a threaded section. It simply had to be threaded several inches into the cylinder after a few inches were trimmed off. Make sure the cut end is filed all the way To ensure a successful cut, you should have already installed one of the lock nuts. Once the thread has been chased clean, it will then be reinstated. After each loading, you might need to tweak the cylinders a little in order to ensure they are firmly in place before latching the handles. If you want to prevent the pin rings from getting lost, you should tie them to the latch with something like a piece of quality twist tie so they don't fall off. They must be firmly attached for safety. You can use a handle to jiggle the latch a bit if you have trouble pushing the pins home. You'll enjoy it. You can load and unload your vehicle with ease using these tie downs. Ha! Unplug your electrical cord before you go to sleep.

Rosemary DODD
Rosemary DODD
| Apr 04, 2021
It's boom time! A spring loaded bid reduces the price over the TL & stainless
5/5

The freezing rain, heavy snow, wind, and sea salt have accompanied the storm 4 months on and yet it hasn't ended It's all wonderful, and the savings over TL is amazing! I am grateful for your help, I have crank down hard with no problems, I have crank down soft with a little slack with no problems, the cotter pins are stainless too and there is no break. It is quite possible to adjust all of these jacks fully open without any problems! For some weird reason, I was positioned just so and they started to work just fine! To take full advantage of the long screw jack, we needed to run it fully and fully I held on to it! For the first 400 miles I did mountain driving, and I tightened up at the gas station. This may be the most rigorous test I've put them through in a short amount of time & the results have been great Thank you so much for saving me thousands of dollars. Thank you, Jac!.

Amora McGrath
Amora McGrath
| Dec 19, 2020
The first time I used them I was in love with them immediately
5/5

There was a need for quick release turnbuckles for several reasons. The first time I used them I was in love with them immediately. Since the drivers side tie down placed the turn buckle over the fuel door of my car, a quick release turnbuckle was necessary. Based on my research, I decided to convert all 4 tie downs to quick release turnbuckles. It took my arms a great deal of effort to tighten all 4 tie downs by hand. The problem doesn't seem to exist anymore, in my opinion. Please see below for an updated version of this sentence As a result of taking my camper on a couple of trips, I've fallen in love with these ties and am totally hooked on them A downswing. Unlike my old tie downs, this system is WAY easier to crank down tight (but not too tight, as the instructions explain) and my camper rides so much better than before.

Lexi Lane
Lexi Lane
| Jun 09, 2021
Exactly what I was looking for--good quality at an excellent price
5/5

These were designed to fit with Happijac tie downs and were too short for my Torklift. By adding long nuts and threaded rod sections to the threaded part I extended it.

Hendrix WALLIS
Hendrix WALLIS
| Sep 17, 2020
The name really does fit this product! Together with a friend, I went on a hunting/fishing trip The turnbuckles were on his camper, and we were using them
5/5

Despite the fact that they were priced at over $400, I said I would have bought some. I started looking for them because he told me you could get them for around $200. *These are great! *These are great! Because they are easy to tighten and loosen, I have been able to reduce my loading time to about 5 minutes. Since I had them on for several days, I readjusted the jam nuts and added lock tight. Once I had them on, they worked well for several days. Any person with a cab over camper would benefit from these seats.

Nicholas Parks
Nicholas Parks
| Dec 12, 2020
This bracket is not intended to be mounted to a frame
4/5

There aren't any turnbuckles that will reach brackets mounted to the frame. To utilize these turnbuckles, you need longer hook bolts. Only one of the locking pins came with my order. For these to work, you need four total.

Adley Summers
Adley Summers
| Aug 06, 2020
I also wanted to mention how nice they are myself
5/5

In addition to its quality reputation, Happijac is already well known. It is definitely worth the extra money to purchase a Qwik load turnbuckle. Additionally to having a few words to say about how nice those handles are, everyone who has worked on my camper or helped me put or take it off has said the same things about how nice and easy they Almost half of those people said they were going to purchase It is from me, as well as close to a dozen of my friends, that I give five stars.

Kiara Stein
Kiara Stein
| Jan 08, 2021
Giving in was the right thing to do
5/5

We put off buying these Happijacs due to the cost, but gave in and placed an order. They are very good and I'm glad I got The process of loading our camper has been made so much easier. Purchase them as soon as possible.

Briar FRASER
Briar FRASER
| Nov 11, 2020

Related Products For HAPPIJAC Qwik-Load(R) Turnbuckles