* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3

WHARSTM Caster Wheels, 3" Locking Swivel Casters, 1/2"-13 x 1" (Screw Diameter 1/2", Screw Length 1") Threaded Stem Casters, Casters with No Noise Set of 4 Castors, Caster Wheels with Brake Pack of 4

WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3 WHARSTM Caster Wheels, 3
$ 16.98

Score By Feature

Based on 1,432 ratings
Easy to install
9.48
Value for money
9.28
Sturdiness
9.50

OveReview Final Score

How Our Score Is Calculated

Product Description

The installation process is easy A set of screw-swivel casters with brakes, nuts and wrenches are included, and the upper wave plate is shaped like an octagonal wave disk. Set of 4 casters with no noise on stems.
A heavy duty (load capacity) vehicle includes With just one wheel, it can carry 150 pounds with four wheels, it can carry more than 450 pounds it's easy to move. A 3 in. locking wheel swivel caster, 1/2" - 1 1/2" Set of 4 Threaded Stem Casters, 1/2" Diameter, 1" Screw Length, 13 x 1" (Screw Diameter 1/2", Screw Length 1") No Snoring Casters.
Not for profit A thermoplastic rubber wheel will move smoothly without leaving any marks, it won't damage your wooden floor, it won't create any noise, and its surface is soft, so it protects the ground better.
Uses of different kinds Wheels of this type are used in a variety of places, such as on workbenches, carts, trolleys, shelves, wooden cabinets, and for home appliances.
The screw rod specification is as follows You should confirm the screw size before making a purchase so that you avoid buying errors. Details of the screw Approximately half an inch The following is 13 * 1 Diameter of screw 1 inch (2. 1 inch at the screw end), screws length 27 cm This is 54 cm only). Details of the screw Approximately half an inch The following is 13 * 1 The screw diameter is 1 inch (. 1 inch at the screw end), screws length 27 cm This is 54 cm only). Details of the screw Approximately half an inch The following is 13 * 1 Diameter of screw 1 inch (2. 1 inch at the screw end), screws length 27 cm Is 54 cm tall)

Questions & Answers

Is it possible to reach out to Wharstm? What is the direct way to get there? I've checked the web. ?

If you want to be sure, you can call Amazon

What about concrete floors? Will your caster wheels be durable?

I did not have a problem with this caster, it wears out easily Durable and resistant to rust. The wheels are made of sturdy metal. The quality of the Indoor wooden floors will not be damaged by this machine, it is very quiet, and it does not create any visible noise.

What is the purpose of using side brakes on your casters?

To make it easier to operate, the hand and foot brakes can be applied to this caster side brake. Do not walk on people's feet if they accidentally hit their feet.

Are there installation instructions included with this product?

The hole in my portable workbench was already there. This was an easy-to-install device that did not require any instructions. Caster bolt should be inserted into hole, and nut should be attached to bolt. Tighten bolt.

Selected User Reviews For WHARSTM Caster Wheels, 3" Locking Swivel Casters, 1/2"-13 x 1" (Screw Diameter 1/2", Screw Length 1") Threaded Stem Casters, Casters with No Noise Set of 4 Castors, Caster Wheels with Brake Pack of 4

It is of exceptional quality! I love these caster wheels because they are very heavy duty and perform really well
5/5

This is definitely a product that can handle heavy duty applications and they are very durable. It is easy to turn and change directions because the wheels have a 360o range. It is no wheels on the rack my husband bought when he bought an adjustable dumbbell set. With 300 pounds on top of them, he still managed to attach them to the rack. Despite slipping on carpet, I was still able to move the weights around.

Ramon Bradley
Ramon Bradley
| Nov 03, 2020
The weight rating didn't pass, and the casters failed too
3/5

Using the casters on a cradle for an engine, they were rated for 150 lb each = 600 lbs. The engine stripped down to block and heads weighed about 300 lb. A person can weigh 400 pounds. I set the engine on the floor with the cradle attached and immediately noticed the casters collapsed. A little bearing floated all over the floor as well. He threw them into the trash can, swept the sand off the rollers, put the engine in the truck, and took it to the shop to be rebuilt.

Miles Pace
Miles Pace
| Jan 12, 2021
I can perfectly fit it on my shelves
5/5

Wheels like these can be attached to the poles of Regency adjustable shelving. indents every inch, plastic sleeves that catch the indentations, and wire shelves that fit over the sleeves and press into the poles. There is a smooth and quiet rolling of the wheels. The lock on all four wheels is a bit excessive (you typically get a set with two locking wheels and two non-locking wheels Locking wheels) are good, but the extra locks are not necessary and the price is fair.

Lylah Beard
Lylah Beard
| Jul 17, 2020
This is junk
3/5

There is nothing good about these. Those are the screws I used to attach them to the bottom of a cheap My stove had been turned on its side so I could screw them in from the bottom. They screwed right in, great! At first I thought it would be a simple task. You need to turn over the stove so that the wheels are on the stove. As I mentioned earlier, this stove is not that heavy since it's just a cheap electric stove and I can lift it easily on my own. If I lift the stove back over to the wheels, the steel stud bends over like a wet noodle . There was no way that could be true! It feels like the studs are made of lead because they are so weak. Having to remove the one wheel, cut off the stud, and then weld a grade 5 bolt in its place in order to straighten it out, I could do the same for the other wheel. As of now, they work but the ones I did not fix will probably fold over if you hit something while rolling the stove. It's great that the wheels work! It is important to keep in mind that these will be used very lightly.

Marlowe Collier
Marlowe Collier
| Sep 17, 2020
It would probably be fine for lighter These were purchased to be placed on my steel workbench so I could move it They were easy to install, and for a while they seemed sturdy
3/5

After about a month, though, they collapsed as I pushed them into a corner. There were three bent stems on the wheels, so they could not be used. As soon as they are removed from the welded-on tube Those feet are leveling feet inserted in the nuts where the wheels had been on the legs of the bench. I attached retractable casters on each leg and attached leveling feet around these nuts. I have found that to be satisfactory so far. Although I do not think the wheels were overloaded as I did not have anything but the weight of the bench itself weighing on the bench - I am not sure there was any overstress on the axles. I would guess that it is near 200 lbs. The caster housing should be screwed into the nut completely so it does not have any space between the top of the caster housing and the bottom of the nut - if you plan to use them on anything heavy after that, make sure you set them up just right. This can be done on a screwed-in wheel or on any surface that the wheel screws In this way, there will be no weak points to yield if you move these along.

Marisol Nash
Marisol Nash
| May 22, 2021
This is the best deal out there
5/5

1/2 inch to 3/4 inch This stem has 13 leaves. Rolling casters that are very smooth. This is what I put on a 1963 Vendo coke machine in my garage so I could wheel it around. It is not possible to purchase cadters with a 1/2" hole It seemed impossible to find 13 stems at HD or L's, so I searched Amazon. A couple of days later, it was delivered to my doorstep. Thanks for the comment! In addition to locking, the wheels have a brake. At $18 for a set of 4, this is a very good deal.

Samuel Foster
Samuel Foster
| Nov 10, 2020
The SAE is not quite what was advertised, but more of a metric format
3/5

A grill needed wheels replaced, so I bought these. As the threaded part (stem) was supposed to be 1/2" x 13, it was more of a metric twist and I felt I almost shredded the stem trying to install it over the locknut on It was easy to pull out the old wheels, but to install the new casters I had to use quite a bit of force. bolt stems were not 1/2" by 13, but very close and totally out of tolerance for the specifications of the bolt stems. Originally I thought they called the bolt SAE, but I was wrong. There were also metric nuts on the caster, not SAE nuts. Once they were installed, however, they worked just.

Emerson HARTLEY
Emerson HARTLEY
| Jan 29, 2021
This is perfection! The motorized standing desk I got from Smugdesk is on casters because I thought it would be a lot better
5/5

When I asked Lowes for help with the bolt size for the post I was dismissed and told they did not have anything that was suitable for my use. The casters were at least 8 dollars per piece for 3 inch wheels, and they didn't have the bolt size I needed either. It took me a few minutes to figure out what size bolt it was and go online to order it. I was able to attach these casters in just a few seconds, and they fit perfectly on my desk. Awesome price and wheels are great. It's sturdy, and the wheels can be locked up if you want it immobile. I am so happy to find this!.

Navy Dyer
Navy Dyer
| Oct 10, 2020

Related Products For WHARSTM Caster Wheels, 3" Locking Swivel Casters, 1/2"-13 x 1" (Screw Diameter 1/2", Screw Length 1") Threaded Stem Casters, Casters with No Noise Set of 4 Castors, Caster Wheels with Brake Pack of 4